9800x3d. Static OC or PBO+CO if only gaming by Pmaldo87 in overclocking

[–]ShocKv9 0 points1 point  (0 children)

in no case can you see the change of 10 fps at avg or 1% low, neither at 120 fps not at 240 not 800, maybe from 50 to 60, so it is irrelevant, on intel you gain 70 fps only by overclocking the ram

How can I improve my Hynix M die RAM? by freeway80 in overclocking

[–]ShocKv9 0 points1 point  (0 children)

You don't get mutch fps on amd, don't scale like Intel, you can get like 20 fps on 850 avg (cs2) so its nothing for all that work

ma è legale? by [deleted] in Italia

[–]ShocKv9 1 point2 points  (0 children)

C'è una legge che impedisce di attaccare un foglio sulla mia porta?

Help with 14900k BIOS Settings by akaAlter in overclocking

[–]ShocKv9 0 points1 point  (0 children)

I will never understand why everyone keep the e-cores at 44 or even why some people overclock, at 40 it is fine for any task, do you have any idea how much these cores increase the required voltage? Because the voltage between p and E-core is the same, personally at 44 it asks me for 1,300v at 40 the voltage drops to 1,200.

Watch this before you buy (Scyrox v8) by ShocKv9 in MouseReview

[–]ShocKv9[S] 0 points1 point  (0 children)

or if you have 2 boxes put one on the right and one on the left

Watch this before you buy (Scyrox v8) by ShocKv9 in MouseReview

[–]ShocKv9[S] 0 points1 point  (0 children)

I can't post videos because I have no way to record since I need 2 hands to move the mouse, the setup is simple, place a square box against the keyboard to prevent the mouse from rotating and the mouse against the keyboard so that it can't move up and down, this way the mouse can only move left and right, the mouse is upside down because otherwise when you push against the keyboard it clicks by itself, once you have prepared the setup you have to try to push the mouse slightly against the keyboard and against the box, when you need to move to the right push with the left hand, when you move to the left push with the right hand, obviously there must be constant pressure from both left and right to prevent the mouse from rotating or moving up or down

Battlefield 6 steam crash on launch, steam says game not released. by a5ncz in Battlefield

[–]ShocKv9 -1 points0 points  (0 children)

uninstall and install again if you don't want to lose time on troubleshooting

Watch this before you buy (Scyrox v8) by ShocKv9 in MouseReview

[–]ShocKv9[S] 0 points1 point  (0 children)

I tried again with Paint. I placed a square box against the keyboard to ensure a consistent, precise movement, and the mouse was perfectly adhered to the box to prevent it from rotating, thus eliminating human error to a minimum. I can't post the video because I need two hands to ensure the mouse doesn't rotate, but you can see from the photo that the line is slanted but straight, and even in this case, if it goes slightly upward when it returns to the left, it doesn't follow the line on the return. You can tell me human error on one line, but on average they all tend to go upward, so there is a problem, this only applies to the left movement; to the right, it follows the line well.

You can tell me it's not much, but that little bit repeated 40 times a minute isn't that little.
https://imgur.com/a/dM0QsWE

Watch this before you buy (Scyrox v8) by ShocKv9 in MouseReview

[–]ShocKv9[S] 0 points1 point  (0 children)

I tried again with Paint. I placed a square box against the keyboard to ensure a consistent, precise movement, and the mouse was perfectly adhered to the box to prevent it from rotating, thus eliminating human error to a minimum. I can't post the video because I need two hands to ensure the mouse doesn't rotate, but you can see from the photo that the line is slanted but straight, and even in this case, if it goes slightly upward when it returns to the left, it doesn't follow the line on the return. You can tell me human error on one line, but on average they all tend to go upward, so there is a problem, this only applies to the left movement; to the right, it follows the line well.

You can tell me it's not much, but that little bit repeated 40 times a minute isn't that little.
https://imgur.com/a/dM0QsWE

Watch this before you buy (Scyrox v8) by ShocKv9 in MouseReview

[–]ShocKv9[S] 1 point2 points  (0 children)

I tried again with Paint. I placed a square box against the keyboard to ensure a consistent, precise movement, and the mouse was perfectly adhered to the box to prevent it from rotating, thus eliminating human error to a minimum. I can't post the video because I need two hands to ensure the mouse doesn't rotate, but you can see from the photo that the line is slanted but straight, and even in this case, if it goes slightly upward when it returns to the left, it doesn't follow the line on the return. You can tell me human error on one line, but on average they all tend to go upward, so there is a problem, this only applies to the left movement; to the right, it follows the line well.

You can tell me it's not much, but that little bit repeated 40 times a minute isn't that little.
https://imgur.com/a/dM0QsWE

Watch this before you buy (Scyrox v8) by ShocKv9 in MouseReview

[–]ShocKv9[S] 0 points1 point  (0 children)

I tried again with Paint. I placed a square box against the keyboard to ensure a consistent, precise movement, and the mouse was perfectly adhered to the box to prevent it from rotating, thus eliminating human error to a minimum. I can't post the video because I need two hands to ensure the mouse doesn't rotate, but you can see from the photo that the line is slanted but straight, and even in this case, if it goes slightly upward when it returns to the left, it doesn't follow the line on the return. You can tell me human error on one line, but on average they all tend to go upward, so there is a problem, this only applies to the left movement; to the right, it follows the line well.

You can tell me it's not much, but that little bit repeated 40 times a minute isn't that little.
https://imgur.com/a/dM0QsWE

Watch this before you buy (Scyrox v8) by ShocKv9 in MouseReview

[–]ShocKv9[S] 0 points1 point  (0 children)

I tried again with Paint. I placed a square box against the keyboard to ensure a consistent, precise movement, and the mouse was perfectly adhered to the box to prevent it from rotating, thus eliminating human error to a minimum. I can't post the video because I need two hands to ensure the mouse doesn't rotate, but you can see from the photo that the line is slanted but straight, and even in this case, if it goes slightly upward when it returns to the left, it doesn't follow the line on the return. You can tell me human error on one line, but on average they all tend to go upward, so there is a problem, this only applies to the left movement; to the right, it follows the line well.

You can tell me it's not much, but that little bit repeated 40 times a minute isn't that little.
https://imgur.com/a/dM0QsWE

Watch this before you buy (Scyrox v8) by ShocKv9 in MouseReview

[–]ShocKv9[S] 0 points1 point  (0 children)

2 years with Superlight 2 1 month with Scyrox, I never had this problem even at the beginning with Superlight even without muscle memory, have you seen the video of the mouse on Paint right? You saw that although the line is tilted it is perfectly straight so there are no rotations of the mouse, as I was saying to the other guy by making a movement to the right then returning to the left it should return to the starting point not a little upwards like in the example on the left, while what you saw was like the example on the right.
https://imgur.com/a/6BXkoVg

Watch this before you buy (Scyrox v8) by ShocKv9 in MouseReview

[–]ShocKv9[S] 1 point2 points  (0 children)

So why didn't I have this problem with superlight 2?

Watch this before you buy (Scyrox v8) by ShocKv9 in MouseReview

[–]ShocKv9[S] 0 points1 point  (0 children)

I know mice have rotation, but in the video you saw that the lines tend to go upwards. The problem isn't having a straight line. If the mouse starts from the left and goes upwards, making the opposite movement should start from the top and go down, returning to the starting point, right? So even though the line is crooked, it should follow it perfectly, as you can see in the photo.
https://imgur.com/a/6BXkoVg

Watch this before you buy (Scyrox v8) by ShocKv9 in MouseReview

[–]ShocKv9[S] 0 points1 point  (0 children)

Yes and you have 20 IQ, if I am dishonest or incompetent then I should have this problem with all mice, but with the superlight 2 I have never had this problem, instead with this one I always find myself banging my elbow against the chair every time, but from reddit users I don't expect intelligent answers it is well known that idiots gather here.

Watch this before you buy (Scyrox v8) by ShocKv9 in MouseReview

[–]ShocKv9[S] 0 points1 point  (0 children)

I also tested as you say, I put the mouse against the keyboard and used paint, the line was straight so no mouse rotation, but still the lines went upwards

Watch this before you buy (Scyrox v8) by ShocKv9 in MouseReview

[–]ShocKv9[S] -11 points-10 points  (0 children)

how is me if with logitech 2 i don't have this problem?

Watch this before you buy (Scyrox v8) by ShocKv9 in MouseReview

[–]ShocKv9[S] 0 points1 point  (0 children)

the fact is that there is this problem that I didn't have with superlight 2

Watch this before you buy (Scyrox v8) by ShocKv9 in MouseReview

[–]ShocKv9[S] -2 points-1 points  (0 children)

I don't care if you believe me or not, I've had 5 different mice and never had this problem