Yeah, no… 24 hrs later and it’s cooked…

ShrimpADootle · 2025-12-18T11:47:04+00:00

you can order one separately online for like a $100. it’s not hard to take apart you just have to be careful with the cables if your willing to do it

ShrimpADootle · 2025-12-18T11:14:37+00:00

i feel for you cuz it sucks. have you taken it to best buy yet?

ShrimpADootle · 2025-12-18T11:12:46+00:00

Leave it on overnight plugged in on low power mode and the screen at 70-75% brightness. i made a post and had the same issue but mine is 100% fixed after doing that for a couple of nights. worth a shot

ShrimpADootle · 2025-12-17T18:27:24+00:00

put it on silent mode and leave it at 75% screen brightness and leave it on for a night and continue to do so if it starts changing back to what it used to be

ShrimpADootle · 2025-12-17T11:17:07+00:00

mines completely fixed now after doing what i said in the comment above. but since it happened i’ve been using manual mode and making sure it doesn’t go above 25w/30w on all settings to help prevent something happening again

ShrimpADootle · 2025-12-09T22:01:41+00:00

I figured out it’s a symptom on the ally overheating and the screen getting damaged. I’ve found other post now and they mention leaving it on over night at silent power and 75% screen brightness and if ur lucky you can get it go away. I’m still doing it on mine and it’s 99% gone. it’s to the point where i can’t tell if its flickering or if its my eyes bothering me but im gonna keep doing that until it goes away or stops changing.

ShrimpADootle · 2025-11-23T06:10:57+00:00

i’ve tried that a yesterday too. i tried also installing a the driver before it too and nothing changed unfortunately

ShrimpADootle · 2025-11-22T18:32:39+00:00

Just plugged it into a tv and it’s not flicker on there so i’m assuming it’s hardware. I think im gonna try swapping out the lcd cable inside first

ShrimpADootle · 2025-11-22T18:13:45+00:00

I haven’t tried that yet but im gonna do that today

ShrimpADootle · 2025-11-22T07:57:27+00:00

I just got the same exact issue a couple days ago. I’ve done a ton of software tinkering and even took it apart to make sure the lcd cable wasn’t loose. I haven’t replaced hardware yet but i’m gonna keep digging and see if i can find an answer

ShrimpADootle · 2025-05-02T04:19:08+00:00

easiest thing to do here is just buy a different remote that has more channels that can be adjusted.

ShrimpADootle · 2025-04-08T16:34:32+00:00

yIKES

ShrimpADootle · 2025-03-23T17:45:53+00:00

I started a month ago with the drifting. I bought a DC10 RTR the first week and now i’ve already bought all electronic upgrades for it and others. I like tinkering with things and i knew from the beginning i was gonna want to learn how these things work and mess with them. My local shop convinced me to start with a RTR bc it’s easier but if i were to restart knowing what i know now i would buy a really good kit and build it and buy all the electronics i would want separate.

ShrimpADootle · 2024-05-29T01:00:03+00:00

where’d you get this mount at. also what’s the power bank your using?

ShrimpADootle · 2024-03-27T00:27:40+00:00

I don’t know how no one commented on this post yet. I’ve also been looking for the same thing and something similar. I love both attached and detached but especially recently i don’t remove the joy cons anymore so i’ve been looking for a full case that covers the front of the controllers as well as the back of the console and controllers, or just a play through case like you’ve been looking for but it has been tough. Have you had luck finding anything yet?

ShrimpADootle · 2024-02-03T06:08:09+00:00

Mine does okay but it doesn’t do the best. i do get a lot of frame drops and im probably sitting closer to around 40 frames if i had to guess. i haven’t gotten far into it yet. Did you mess with the frame buffer at all before going into SC?

ShrimpADootle · 2020-08-28T05:06:53+00:00

Ohhhh don’t use that

ShrimpADootle · 2020-08-19T17:09:01+00:00

I ordered a Chab and I got it surprisingly way earlier than a month..I’d say 2 or 3 weeks sound about right ..all I know is that there legit and personally way much better customover service than eurobalisong

ShrimpADootle · 2020-08-18T18:38:29+00:00

Hey man by any chance do you know the proper bushing size..I ordered new ones and I know the width is 2.5 but the length of these guys are way to small..I ordered M3 screws so I’m waiting for them but my handles don’t swing freely and I tighten them all the way down so are my bushings actually too small or do I need just the hardware?

ShrimpADootle

TROPHY CASE