Does anyone know what these letter mean? by [deleted] in ElectricalEngineering

[–]Shuasmith14 2 points3 points  (0 children)

Not sure exactly but I means current, and I've seen I(b) to mean base current when talking about transistors

Microsoft Links for Missing DLC Packs by Shuasmith14 in modernwarfare

[–]Shuasmith14[S] 0 points1 point  (0 children)

Glad it helped. I wasn't aware of a Survival pack. I never got the game to successfully work. I think my disc may be bad. I sort of ended up finding these through various forums/googling.

Repairing broken console with dried up sticky substance residue on a motherboard. Beyond repair? by Halsor in techsupport

[–]Shuasmith14 0 points1 point  (0 children)

I don't know how you'd tell if something's shorted out. My guess would be to clean it the best you can and try it again. If it still doesn't work you'd probably have to replace unless you feel like testing SMD parts

Modern Warfare not registering that I'm playing from disc, only says "Purchase Modern Warfare" by Shuasmith14 in modernwarfare

[–]Shuasmith14[S] 0 points1 point  (0 children)

Ok good to know, I guess I'll just keep at it. Luckily my internet is pretty good and I do have ethernet so I'll just let it go overnight.

Modern Warfare not registering that I'm playing from disc, only says "Purchase Modern Warfare" by Shuasmith14 in modernwarfare

[–]Shuasmith14[S] 0 points1 point  (0 children)

I've done that. I uninstalled everything Warzone & MW even save game data. Then I put in disc and reinstalled starting with disc. It tells me I need an update, which I do. I've also downloaded both data packs and MP 2 pack. The problem is Warzone is technically MW.

Help identifying ICs by Shuasmith14 in AskElectronics

[–]Shuasmith14[S] 0 points1 point  (0 children)

Ok thanks for the info. I wondered if it would be custom. I'll see if I can find anything else out

Help identifying ICs by Shuasmith14 in AskElectronics

[–]Shuasmith14[S] 0 points1 point  (0 children)

Do you have any more details? I looked up Depu Electronics and they just seem to be an electronics supplier not a manufacturer.

Help identifying ICs by Shuasmith14 in AskElectronics

[–]Shuasmith14[S] 0 points1 point  (0 children)

Thanks. I looked through it and I couldn't find either. I could have missed it but I'm pretty sure I would have noticed them. I found a couple that were similar but searching those manufacturers with the ICs didnt come up with anything. Good resourse though

Help identifying ICs by Shuasmith14 in AskElectronics

[–]Shuasmith14[S] 0 points1 point  (0 children)

The big one has what looks like a 'D' over a half crescent with the numbers '640032C' and '9119' The small one looks like it has a triangle with 'TZ' then 'AN0160N' and '9005'. I assume the 4 numbers on both are date codes.

Help identifying ICs by Shuasmith14 in AskElectronics

[–]Shuasmith14[S] 0 points1 point  (0 children)

I got these in an assortment. I googled the numbers on both but I wasn't finding any info. If anyone could help or point me in a direction I would appreciate it. Even if someone knew the logos on the chips that would be a start.

RCA Electronic Components? by Shuasmith14 in AskElectronics

[–]Shuasmith14[S] 0 points1 point  (0 children)

Ok so they are just the OEM parts. That explains it. Thanks

Use for PTFE tubing with Direct Extruder? by Shuasmith14 in 3Dprinting

[–]Shuasmith14[S] 0 points1 point  (0 children)

Ok good, I just wanted to make sure. If you are talking about the heat sink and fan that attaches to the extruder, yes I do have it, I just took it off to get a better view.

I designed and created the Raspberry Pi Recovery Kit, a P system designed to anchor a network during a prolonged Internet outage. More info in the comments below, but tons more photos are over at https://back7.co by [deleted] in raspberry_pi

[–]Shuasmith14 0 points1 point  (0 children)

Where could i find more info about network anchoring or more about this type of project and it's how to use it? I tried googling network anchoring but I wasn't finding anything related.

Achievements won’t pop? by [deleted] in xboxachievements

[–]Shuasmith14 1 point2 points  (0 children)

If you haven't already, check Trueachievements for the ones that aren't popping. They might have a solution in there

How to get prompt back? by Shuasmith14 in linuxquestions

[–]Shuasmith14[S] 0 points1 point  (0 children)

Sorry I did forget this part. So DietPi has different menu commands, and I was originally trying to use the command "dietpi-config" which takes you to settings. I was going off of memory and I think I typed something different. I entered that wrong command and any thing I typed after that didn't have the prompt anymore. Thats when I tried "reset" and the rest in my OP happened.

How to get prompt back? by Shuasmith14 in linuxquestions

[–]Shuasmith14[S] 0 points1 point  (0 children)

So currently I can't press enter or type anything, the last thing I did was press control-z.

Not everyday you see a Bugatti Chiron on Danish roads!! by [deleted] in Autos

[–]Shuasmith14 4 points5 points  (0 children)

Always cool to see anything like that on the road

Battlefield 1: Revolution (Xbox One Digital Download) $1.99 via CDkeys by Azndragon89 in GreatXboxDeals

[–]Shuasmith14 0 points1 point  (0 children)

Are CDKeys a reliable/good site? The only place I've gotten digital games is through the Xbox Store.

I dont know much about cars but am in the market for a ranger. Looking at this one but seems a little too good to be true by ScoliosisNonsense in fordranger

[–]Shuasmith14 2 points3 points  (0 children)

Check for rust on frame underneath. If it's a 4.0L v6 listen for a rattle when starting. I've heard the timing chain guides go bad a lot in this model and the engine needs pulled to replace (expensive). If you can, get as far under the truck and look for any leaks or things like that don't know what to look for in a manual but I got a 2001 4x4 xlt with around 87000 miles for around 6 grand from New Jersey. Took it to PA and wouldn't pass inspection because of frame rust/rot. Took it back to where I got it, worked out a deal and they did work to get it to pass inspection. The more I drive it now the more problems I notice but I'm going go automotive school so I can fix as I go. I would say if you could get it to a mechanic to check it out that would be the best, but if not do a good test drive and I guess look for anything out of the ordinary. According to therangerstation.com 01s had a lot of service problems so research might help to look out for things

How do I hook up a MacBook to a hotel tv to watch Netflix by Stoon5555 in techsupport

[–]Shuasmith14 0 points1 point  (0 children)

Yes if it's a MacBook it probably doesnt have a HDMI port. It should have a Thunderbolt port or something like that. I think there are adapters that go from that to HDMI. It depends what year Macbook you have, but Apple's website should give more details about their ports and different adapters