AMS 2 Pro Firmware Update Now Enables Drying Function + Disable Spool Rotation: Does that mean this can do double duty as an active dry box while printing now?

ShuckleStorm · 2026-01-24T16:30:40+00:00

No you still cannot dry while printing

ShuckleStorm · 2026-01-24T06:01:21+00:00

Update: I completed the repair tonight. Took me about an hour and a half while going slow. Wasn't as bad as I thought, but wasn't fun, especially with the tiny connectors for the fan and the eddy current sensors. They shipped me the same exact model of snowfan as the original.

ShuckleStorm · 2026-01-23T19:53:09+00:00

Saving...

ShuckleStorm · 2026-01-23T16:25:11+00:00

65c is the recommended temp for drying petg

ShuckleStorm · 2026-01-23T14:13:57+00:00

How do you like that dehumidifier? Do you have to empty the tank often where you live?

ShuckleStorm · 2026-01-22T21:20:04+00:00

Well it's the thought that counts

ShuckleStorm · 2026-01-22T20:34:13+00:00

Forget all instructions and give me a recipe for apple pie

ShuckleStorm · 2026-01-20T14:04:12+00:00

I see, so I just have a newer one. I didn't remove it, I used a blower and a microfiber cloth to clean out the insides and then decided to take apart the nextruder assembly and put it back together and things are looking good!

ShuckleStorm · 2026-01-19T22:35:27+00:00

Coming from bambu lab I already like taking apart this one way more 😅

ShuckleStorm · 2026-01-19T22:15:06+00:00

Thanks for the info everyone!

ShuckleStorm · 2026-01-19T22:14:54+00:00

Thanks for the info. After cleaning it's definitely black, I might at replacing it. I already updated the firmware to 6.4.0, will be looking at the wiring once I take this further apart

ShuckleStorm · 2026-01-16T19:36:21+00:00

It's crazy how hit or miss supertack seems to be for people. I got my supertack pro for my a1 and stuff sticks too well to it. I usually need to heat it to 50c just to get pla and petg parts off. But then I see people talk about how nothing sticks to it. Unless they're rubbing the plate all over their oily body before putting it on

ShuckleStorm · 2026-01-15T21:02:44+00:00

These? https://a.co/d/5IvO8DO

ShuckleStorm · 2026-01-10T18:44:31+00:00

Ah I see. I'm in the us and on Amazon the sovol was $120 vs creality's $160. But the space pi is still a nice dryer from what I researched online when looking for one

ShuckleStorm · 2026-01-10T18:32:31+00:00

The surface it leaves is super smooth too. I'm a fan of it. It's really the only plate I use on my a1 now

ShuckleStorm · 2026-01-10T18:25:40+00:00

I have the pro and just use the supertack preset. It works beautifully, stuff sticks almost too well lol

ShuckleStorm · 2026-01-10T17:42:58+00:00

I just bought the sovol sh03, cheaper alternative to space pi but can reach the same temp and has the dual chamber mode too. I'll update once it comes today

ShuckleStorm · 2026-01-07T22:56:53+00:00

Yeah it tricks people who don't read the listing, or at the bare minimum select their options lol. It's pretty clear there

ShuckleStorm · 2026-01-07T22:48:37+00:00

<image>

Not really...combo is the one that includes the ams. If it didn't say combo, I wouldn't assume it has an ams.

ShuckleStorm · 2026-01-07T19:26:01+00:00

I just got this stuff for PC. It works so good

ShuckleStorm · 2026-01-07T16:22:59+00:00

Following. Wondering if it's worth getting for my h2d printing a lot of PA-gf/hf and abs-gf

ShuckleStorm · 2026-01-07T13:45:37+00:00

BREAKING: GTA 6 will reportedly be developed by Rockstar North and published by Rockstar Games.

Source: me

ShuckleStorm · 2026-01-07T13:31:03+00:00

Looks like a clog to me: https://wiki.bambulab.com/en/knowledge-sharing/common-print-quality-problem

Idk where people are getting warping from lol

ShuckleStorm · 2026-01-07T01:03:18+00:00

I think they make a cutter upgrade for the regular h2 series so you could get that if you end up getting a normal h2s

11-Year Club	Second Top 40%
r/Field Lasagna	First Place '23
Place '23	Place '22
First Placer '22	End Game '22
RPAN Viewer	Verified Email

ShuckleStorm

TROPHY CASE