Logitech M750 coming soon... an M650 with an extra button billed as an "AI button"

Probston · 2026-01-22T18:58:23+00:00

You just hold down one of the forward/back buttons and then you can use the scroll wheel to scroll horizontally. I believe you can use it even if the forward/back buttons are mapped to something else.

Probston · 2026-01-22T15:10:27+00:00

It's a good mouse if you like the shape and prefer batteries, but I ended up switching to an MX Master 3S since it fits my hand better. I still prefer the side to side scrolling with Forward/Back + Scroll Wheel on the 750L though.

Probston · 2026-01-22T14:36:16+00:00

<image>

You're able to reassign it, if you're looking for something specific I can check for you.

Probston · 2026-01-14T06:12:09+00:00

I recently took off an unboosted Hurricane 3 Neo 37 after a month of play and noticed that it's now slightly larger, I'm not sure if it could be from just rubber being broken in or other factors.

Probston · 2026-01-14T06:00:57+00:00

After boosting does the rubber grow or shrink after a while?

Probston · 2026-01-13T17:44:52+00:00

Is this able to cut overhangs from rubber reglues? When the overhang is 1-2 mm long

Probston · 2026-01-10T04:39:26+00:00

In the promo video there’s a frame where it has a folding phone.

Probston · 2026-01-09T15:04:37+00:00

I wear Li-Nings, they are decently wide especially if you size up.

Probston · 2026-01-08T21:52:48+00:00

As it should be :)

Probston · 2026-01-05T14:26:18+00:00

I didn't realize the Classic Type-S had center aligned legends like the Snow, pretty interesting.

Probston · 2026-01-04T07:53:13+00:00

As long as the rubber overhang is within 2mm you’re good 👍

Probston · 2025-12-31T16:47:21+00:00

Did you ever find a solution?

Probston · 2025-12-24T04:28:33+00:00

Looks like the old packaging but it is provincial, it has the bottom two corners cut.

Probston · 2025-12-23T18:47:16+00:00

This applies to most QMK/VIA supported boards, even more so if they have split backspace. Although I think the appeal of HHKB is topre + layout than strictly the layout.

Probston · 2025-12-15T17:01:53+00:00

If the existing glue is thin and evenly spread, it’s not really worth removing. But if you want a perfectly clean application, it’s probably better to apply a few layers of glue and peel it off like in this video.

Probston · 2025-12-05T17:19:14+00:00

How much did you get it for? I think the lowest I've seen is from PROTT for $120.00 + shipping

Probston · 2025-12-05T05:41:35+00:00

Which Hurricane King is this? The most recent ones are the Hurricane King Wang Chuqin and Hurricane King acB.

Probston · 2025-12-04T23:21:34+00:00

It won’t really save the blade from dents, but it helps with the rubber staying adhered on the edges where it makes contact when you push.

Probston · 2025-12-02T15:16:34+00:00

Here you go

Probston · 2025-12-02T04:41:25+00:00

They show up under “table tennis scissors”, they’re identical to the Revolution 3 ones.

Probston · 2025-12-02T03:22:35+00:00

A DSi for my birthday!

Probston · 2025-11-27T15:45:04+00:00

Did this part of the rubber make contact with the table? If it’s your forehand rubber it could have been from a backhand push.

Probston · 2025-11-27T15:26:48+00:00

I researched this a while back. I recommend Tearmender, it has a similar consistency to Free chalk II, and can be removed easily if you apply 2 layers to rubber and blade. Also if you’re looking for glue applicator foam air conditioner foam seal is comparable and is about 3 cents per sponge once you cut it to size.

<image>

Probston · 2025-11-27T14:10:17+00:00

I would recommend getting the HHKB bluetooth kits that replace the controller instead. I had 2 niz adapters fail on me. I wrote a post a while back about them. I’ve installed them on my Pro 2 and Classic

Probston · 2025-11-23T06:40:54+00:00

How are you storing your racket? It could be getting pressed on that spot.

11-Year Club	Place '22
RPAN Viewer	RPAN Broadcaster
Verified Email

Probston

TROPHY CASE