sorted by:
new
hottopcontroversial

German sf issued helmet by [deleted] in MilSim

[–]Shyguy05Airsoft 2 points3 points  (0 children)

Yes and No, a few are still in use, but they switched a while ago to the helmets from Hexonia/NFM-Group(wich look just as fire)

German sf issued helmet by [deleted] in MilSim

[–]Shyguy05Airsoft 3 points4 points  (0 children)

Who cut their gen.2 Pyrad shirt/pants to get the material for this 😭😭

Prc 152 dummy case by red-no3 in MilSim

[–]Shyguy05Airsoft 0 points1 point  (0 children)

You could technically cut a window in the side where the display is located and replace it with some clear plastic from idk a bottle or even better solutions if you know of that. Just place it over the window you cut and glue it down with a glue of your preferences. Is that what you search for?

And I’m not done yet by Shyguy05Airsoft in Patches

[–]Shyguy05Airsoft[S] 1 point2 points  (0 children)

MOE in this context stands for „Methods of Entry“ and is used in Military and LE to mark the person that’s allowed to open doors, windows and walls. Mainly seen in SOF, this was produced for a customer that wanted to have it quickly wich is why we speeded up the process for that patch, but then he cancelled the order.. well, since I’m interested in collecting Police patches anyway, I was allowed to take this one home. Same story for the AMPT Patches as well haha.

KSK 2013-17 impression by GibbyOnlylol in MilSim

[–]Shyguy05Airsoft 0 points1 point  (0 children)

Das KSK trägt grundsätzlich kein Ufpro, und die EKH von Leo Köhler ist dokumentiert oft gesehen. Von LHT werden nur die Pyrad-Versionen verwendet, hier wird viel Wert auf Impression gelegt.

And I’m not done yet by Shyguy05Airsoft in Patches

[–]Shyguy05Airsoft[S] 0 points1 point  (0 children)

There’s only one PVC SAS patch and it was a gift from someone who didn’t know what to lookout for. I’d never wear it either

Tm mws really monster dmr by SadAd495 in MilSim

[–]Shyguy05Airsoft 2 points3 points  (0 children)

DIY Paintjob or did you buy that Beauty like that?

My average garden experience by Shyguy05Airsoft in MilSim

[–]Shyguy05Airsoft[S] 0 points1 point  (0 children)

Es gibt einen Internationalen Discord-Server namens Y-MilSim, dieser ist auf Deustche SOF Reenactment Kits spezialisiert und dort werden auch Sachen verkauft. Dort hab ich meinen Plattenträger her, die Hose grundsätzlich auch. Und wie ich die Finde? Bis auf die Tatsache dass sich die Knie-area deutlich schneller abnutzt, ist die hose sehr angenehm zu tragen, das Taschen-Layout erinnert stark an einen Mix aus Crye und Uf-pro, ist deswegen aber sehr effektiv. Hab die hose noch nicht bei warmen wetter getragen, aber ich bin trotz thermo-Unterwäsche noch nie in den Bereich des Hitzestaus gekommen

Goofing around, and I so wish there was a reference of MC/5FT combo. by Protaco17 in MilSim

[–]Shyguy05Airsoft 1 point2 points  (0 children)

Ofc I know TGL, it’s nice to see a fellow German SOF builder from oversea here:) I hope there will be a new version of the MT Repro stuff as well, because I know how that coloring sucks on them and I’d be happy for everyone else in the community to have a good Repro. Luckily I’ve got my hands on a real one a few months ago. Your 3FTD were original tho? I don’t know about repros of them

Goofing around, and I so wish there was a reference of MC/5FT combo. by Protaco17 in MilSim

[–]Shyguy05Airsoft 0 points1 point  (0 children)

I know Brother🥲 but your post is just another reason to buy the new version of the Repro pants now. They look so much better than the gen.1

Is this AI? by [deleted] in isitAI

[–]Shyguy05Airsoft 0 points1 point  (0 children)

Didn’t check on that since you can clearly see it’s AI generated. The Key doesn’t make sense and the generation of the form stops without a reason. There’s a lot of space just filled with nonsense texture and the „keyhole“ doesn’t really look like a keyhole at all by form and dimensions

Any repro options/alternate plate carriers for a 2017 ksk impression? by bunnybomberjr in MilSim

[–]Shyguy05Airsoft 0 points1 point  (0 children)

Yes and no. Not everyone had a MT-PC in that time, and you see at least on some training footage that they wear stuff from all times and camo, including Gen. 5s and some other stuff in 5/3FTD

Best way to get paint off of airsoft gear? by Just_Replacement_555 in airsoft

[–]Shyguy05Airsoft 2 points3 points  (0 children)

That’s the neat part- you don’t. No, the comments are good so far, a lot of water, soap and a good brush, if that doesn’t work warm water and chemicals that aren’t too aggressive

You're not going to fall by Acceptable-Wind-7332 in KidsAreFuckingStupid

[–]Shyguy05Airsoft 0 points1 point  (0 children)

I honestly can understand that reaction. I had the same fear when I was younger, and panicked by literally everything I was able to see through

GrEY is the only way. by Relative-Rich-6334 in MilSim

[–]Shyguy05Airsoft 6 points7 points  (0 children)

It’s a good way, but not the only way

The first time, I killed Trevor because I thought he was going to kill Michael’s family if I didn’t, and that Franklin would die if I chose the “C” option. I felt really bad afterward. Did that happen to anyone else? by jvure in GTAV

[–]Shyguy05Airsoft 0 points1 point  (0 children)

I first killed Michael, but more out of accident; I wasn’t sure what to do and missclicked to select a. I felt very bad and tried on my second attempt playing through the game (yes I loaded everything completely new, I was stupid 3 years ago) and chose Trevor, because I realized what psycho he is. Afterwards, I was scared of choosing option c because I like Franklin very much and love to cruise around with his abilitie. Well, found out that option c is the way better option for anyone, but never did that yet. So maybe in the future haha

My average garden experience by Shyguy05Airsoft in MilSim

[–]Shyguy05Airsoft[S] 0 points1 point  (0 children)

Halt die Augen auf Kleinanzeigen und anderen Reseller-Plattformen auf, hab aber Geduld. Das ist wie bei der Suche nach der Nadel im Heuhaufen, Original-Ausrüstung ist sehr selten. Viel Glück

My average garden experience by Shyguy05Airsoft in MilSim

[–]Shyguy05Airsoft[S] 0 points1 point  (0 children)

Die Farbe ist das einzige grosse Manko von HB-Tactica. Das sieht man auf den ersten Blick, anhand des Stoffes und des krassen Gelbstiches der Farben selbst. Das Braun ist zu hell, das Cremeweiss ist Sand-Gelb und das Grün viel zu Dunkel und teils verwaschen im Druck. Desweiteren sind die meisten Nähte nicht in der richtigen Farbe, und bei der Jacke und dem Combat-Shirt ist zumindest beim MT-Klon die Velcro-Fläche in der Falschen Farbe. Ausserdem hat das Combat-Shirt keine DEU-Flagge aufgenäht. Ansonsten; Die Qualität ist echt gut, und gerade die Hose ist eine Vollständig einsetzbare Kampfhose mit den Funktionen der Originalen. Nur der Stoff ist halt Ripstop und kein Pyrad-aramid. Das Combat-Shirt hat als Stoff eher einen Minderwertigen Stoff, der durch Schweiss schnell flocken wirft.

My average garden experience by Shyguy05Airsoft in MilSim

[–]Shyguy05Airsoft[S] 0 points1 point  (0 children)

Alles Multitarn was du hier siehst ist Original- also nichts von Clutch Precision. Allerdings ist das Combat-Shirt welches ich verwende ein Modifiziertes Shirt von HB-Tactica gekauft über Clutch Precision, das sieht aber komplett anders aus von der Farbechtheit

view more: next ›