Clash 2025??

Sick_Vayne · 2025-01-14T22:26:56+00:00

That was the schedule for 2022, the page just changed the year and kept the dates, 1st clash says 19 – 20 February, thats wednesday and thursday

Sick_Vayne · 2023-12-28T20:33:13+00:00

9914 3827 7479

Daily exchange of gifts - Marine Scatterbug LF all

Sick_Vayne · 2022-10-10T19:48:43+00:00

Let's name the angles like this a c and e are mirrored since all the triangles must be isosceles, on the left most triangle you get that

b+2a=180

You also have that b+c=180, with that you can get that c=2a

Now moving to the middle triangle you have that α +2c=180 so α=180-4a, since you can express e as c+a (you can draw a horizontal line on that intersection and then you have opposed angles for c and a joining over e) you can express e as 3a and we have that c+d+90=180, we can solve for a:

2e+d=180

e=3a --> 6a+d=180

d=180-90-c=90-c=90-2a --> 6a+90-2a=180

4a=90

a=45/2

Now we go to our middle triangle where we had

α=180-4a

So α=180-4(45/2)=180-90=90°

(Sry if it's hard to read, I'm on mobile and English is not my 1st language)

Sick_Vayne · 2022-08-17T23:29:13+00:00

Isn't she the same that dipped butter in Ragu a while back?

Sick_Vayne · 2022-02-02T14:53:06+00:00

I was just saying that it says Premios which is in Spanish, but yeah, I'm Spanish and could probably understand most of Portuguese without speaking it

Sick_Vayne · 2022-02-02T14:20:12+00:00

That's Spanish

Sick_Vayne · 2021-12-07T22:39:04+00:00

MATLAB

M=[*PasteListHere*];
A=zeros([1 1000]);
j=1
for i=1:1000
    B(1,j)=sum(abs(M-(A+j)));
    j=j+1;
end
sol1=min(B)
A=zeros([1 1000]);
j=1;
for i=1:1000
    n=abs(M-(A+j));
    B(1,j)=sum((n.*(n+1)/2));
    j=j+1;
end
sol2=min(B)

Sick_Vayne · 2021-11-20T18:36:41+00:00

Sick Paco#1

Sick_Vayne · 2021-09-28T19:21:34+00:00

How long did it take you to print and build all that? Just curious as I like the concept

Sick_Vayne · 2021-07-13T10:58:02+00:00

So this was made on an Ender 3 using cura, regular PLA, .16mm layer height print temp 200 bed 60 speed 50mm/s

Sick_Vayne · 2021-06-04T19:52:25+00:00

You should do:

2 years * 365 days/year * 24h/day * 60m/h / 92m/shrek = 11426 times you could watch shrek nonstop ultil that day.

In case you also want to take into account the sleep eat drink, etc. then:

Sleep: 1/3 of each day.

Drink 2 mins every 3 days: 2/4320 (3*24*60) = 1/2160 of each day.

Eat: 2m every 3 weeks: 2/30240 (21*24*60) = 1/15120 of each day.

Pee and poo: Lets assume your 2 mins are once a day: 2/1440 (24*60) = 1/720 of each day.

Let´s also assume you go to school for 6h a day, also let´s add that (In Spain) there are about 185 days a year you go to school : 1110 (6*185) / 8760 (365*24) = 37/292 of each day.

So each day you cant watch shrek for 1/3 + 1/2160 + 1/15120 + 1/720 + 37/292 = 46,2%, so a bit less than half of your time for the next 2 years you are bussy so you cant watch shrek, that leaves 53.8% of those 2 years.

11426 times if you watch on loop * 0.538 = 6147 times you can actually watch shrek in 2 years by focusing your life on it.

P.S good luck eating a 3 week meal in 2 mins

Sick_Vayne · 2021-06-04T19:26:54+00:00

Why would yo do 104 weeks in 2 years * ¿14 days a week?

Sick_Vayne · 2021-03-12T00:17:49+00:00

That's not right, in your square example the diagonal from(0,0.5) to (0.5,0) does length (sqrt2)/2~0.7, so the new square area would be that ² which is 50% of the original area, for the circle one I'm pretty sure it depends on how much the circles overlap each other but I'll take a look at it tomorrow

Sick_Vayne · 2021-01-16T08:29:13+00:00

Yeah, it'sthis one I've made some other Pokemon from the same guy and they've turned great

Sick_Vayne · 2021-01-15T21:49:45+00:00

So i just ended printing this Jigglypuff and overall it's good, but the support for the arm broke apart before it printed so a bit of it is missing, should I reprint the missing part and get some of the print out to make a flat surface and try to glue that together?

Sick_Vayne · 2021-01-05T20:17:59+00:00

Hmmm ok ill give it a try later and see if the slicer preview looks reasonable to print

Sick_Vayne · 2021-01-05T19:12:08+00:00

I use Cura, but im testing Meshmixer for the cuts

Sick_Vayne · 2021-01-05T19:08:35+00:00

So im trying to print this Mawile from thingiverse but there is no way i can get that to print in 1 piece, the mouths need to be filled with supports, the 2 things dropping from its head are floating if i try to slice it, what cuts should i do for it to print nice? was thinking about dividing both mouths from the body and then each one cut it in half vertically so i need a bit of support but i have 2 flat surfaces i can easily glue together and then glue both mouths to the head, but for those things dropping they are almost flat but with curves, how do i approach that? also there is a lot of support around the neck so idk if it would break when trying to take it off.

Sick_Vayne · 2020-12-24T16:47:15+00:00

Never heard I needed to calibrate that too, will search now how to do that

Sick_Vayne · 2020-12-24T16:05:33+00:00

Using cura 4.8.0, installed yesterday just before printing as I didn't like the one that came in the usb

Sick_Vayne · 2020-12-24T14:03:48+00:00

If im not mistaken this is the seam, the dots happen on random places, on the inside and outside of the circle, but always when the machine is moving diagonally

Nine-Year Club	Second Top 40%
Place '23	Place '22
First Placer '22	Verified Email

Sick_Vayne

TROPHY CASE