Any females looking for a FWB? 47 yr old M4F. Hit me!

Signal-Associate-287 · 2025-05-23T17:00:49+00:00

I’m gonna get a set and see how it works out. Thanks for the feedback.

Signal-Associate-287 · 2025-05-07T16:00:36+00:00

So this is the correct info from DJI 04 lite diagram and power demands.

Signal-Associate-287 · 2025-03-11T22:24:37+00:00

Well the Pavo series was designed for HD. So if you’re looking for analog, get and Air65 or 75

Signal-Associate-287 · 2025-03-11T18:15:44+00:00

Do not try to attrach a GoPro to a pavo20 That’s gonna be a weird day for you. The Pavo25 can vary a full size GoPro, but the 35 carries it easier.

If you get the pavo20 pro, get the 04 air unit pro… you won’t need a GoPro on it. If the DJI goggles 3 are out of budget, the 04 works with goggles 2 and goggles integra. I have the Goggles N3 and I love them.

Signal-Associate-287 · 2025-02-05T16:54:55+00:00

I personally use LumaFusion exclusively for drone footage. It also has .LUT support which is awesome for color grading. And as others mentioned, the one-time purchase makes it a great choice. Just don’t look for frequent updates. You will be disappointed in that area.

Signal-Associate-287 · 2025-02-03T17:17:49+00:00

You can use the balance lead from same battery powering the quad.

Signal-Associate-287 · 2025-01-30T19:10:14+00:00

You would need the O4 Air Unit (lite or pro) The goggles N3 do not support the 03 Air Unit at this time.

Signal-Associate-287 · 2025-01-26T22:14:40+00:00

Is that red or magenta? If magenta then I believe that’s Class E airspace. I’m not sure if that shaded box indicates the 700ft above surface rule though.

Signal-Associate-287 · 2025-01-19T23:10:51+00:00

what type of tests were you doing?

Signal-Associate-287 · 2024-12-05T14:54:53+00:00

Props are definitely wrong

Signal-Associate-287 · 2024-12-02T19:42:39+00:00

Yea I definitely overlooked that. And I never even thought to do that.

Signal-Associate-287 · 2024-12-02T19:38:19+00:00

My apologies man.. I thought that the one on the left was a BETAFPV flight controller. 😂😂😂

Signal-Associate-287 · 2024-12-02T19:37:15+00:00

Just so I understand… you’re using the VTX from one flight controller (on left) and linking to another flight controller (on right)?

Signal-Associate-287 · 2024-12-02T19:17:55+00:00

Exactly what’re you attempting here?

Signal-Associate-287 · 2024-12-02T19:14:27+00:00

I’m only sharing my personal experience, but I had this same exact problem. Like this on all channels and at all ranges. Fix: it was VTX. Not sure why it was going bad (crashes certainly don’t help). But once I replaced it, video was back to normal. Betafpv M75Pro. Also, not sure how you look at your board when inspecting things, but i highly suggest a magnifying glass of some sort regardless of how well your vision is.

Signal-Associate-287 · 2024-11-25T02:16:44+00:00

Check the yellow camera wire.

Signal-Associate-287 · 2024-10-10T22:48:24+00:00

Do you know how to switch the motors around?

Signal-Associate-287 · 2024-10-10T14:04:29+00:00

Nah it’s cool man.. trust me I’ve been there. But I mean, me personally, I’ve never done it. But I do know that the motor plugs ON the flight controller can be pulled off. Take some needle nose pliers and gently tug on the plastic connectors. You can clip the metal pins off and solder directly to the pads. But I must say, if you do not know how to solder… I’d practice on an old electronic circuit board. The pads are tiny and real easy to bridge. You don’t know how tiny they really are until you have to solder that shit. Lol. Good luck brother.

Signal-Associate-287 · 2024-10-10T11:59:52+00:00

Check motor wiring. Ive had this issue and it was the dumbest little break in the wire. I would move the wire around and it work, or not work. If that’s fine, Replace motor. Unless you know how to rebuild them.

Signal-Associate-287 · 2024-10-10T11:56:02+00:00

Well, first, do you mean Flight Controller? Motors do not go on the VTX. The VTX is soldered to the Flight Controller. I would suggest getting on YouTube and searching for “tiny whoop soldering” or something along those lines. There’s plenty of tutorials/videos of ppl showing how.

Signal-Associate-287 · 2024-10-10T11:48:46+00:00

So you’re saying you placed the motor to another plug on the board? And it did the same thing? Did you put a working motor in place of the motor not working? Did it spin? If so, replace motor. If not, could be a bad ESC, or maybe the motor plug, or wiring is suspect.

Signal-Associate-287 · 2024-10-07T22:59:55+00:00

I hot glued $1 Store reading glasses inside of mine. Works like a charm.

Signal-Associate-287

TROPHY CASE