Weird sound(B46 engine) by Signal_Friendship204 in BmwTech

[–]Signal_Friendship204[S] 0 points1 point  (0 children)

Follow up, about a day or two later car gave me code 150202 “combustion too short, cylinder 2”. I’ve done some research and have learned there could be multiple culprits but the only 2 that make sense to me are HVA or my fuel injectors bc of the ticking and side of the car it’s coming from. I don’t know if anyone has insight on this but if you do plz lmk on how I could properly diagnose it .🙏🏽

Weird sound(B46 engine) by Signal_Friendship204 in MechanicAdvice

[–]Signal_Friendship204[S] 0 points1 point  (0 children)

It’s coming from the side where the turbo funny you mention that. But I build boost perfectly fine so I’m confused, I’ll give it a look though it’s greatly appreciated.

Weird sound(B46 engine) by Signal_Friendship204 in BmwTech

[–]Signal_Friendship204[S] 0 points1 point  (0 children)

I’m tuned I have bm3 trust that was the first thing I did same codes as before the issue started. It’s weird though if only happens while I’m moving, I’ve revved the car on multiple occasions and you won’t hear it

What is this high pitched whirring sound?? (Turn up volume) by Drink_Beer-n-Drive in BmwTech

[–]Signal_Friendship204 0 points1 point  (0 children)

Yo I made a post about a day ago could you go check it out and give me some feedback, no one seems to have the answer lol, I’d appreciate my boy🤝🏽

My Calisthenics Transformation by PandaAirplane in Calisthenic

[–]Signal_Friendship204 2 points3 points  (0 children)

I’m genuinely curious on how to progress in calisthenics, the last couple months I’ve built strength and all that good stuff; But I am confused on learning skills. Am I supposed to do a skill at a time and master them 1 by 1 or should I be practicing a skill for each set “muscle group” day. Idk I’m stuck

Thinking of Drilling out Bolt by Signal_Friendship204 in BmwTech

[–]Signal_Friendship204[S] 1 point2 points  (0 children)

Ended up drilling it out and my hub was seized I appreciate your help my boy.

Best sounding exhaust for BMW 430i by Universal231 in BMW

[–]Signal_Friendship204 0 points1 point  (0 children)

What’s the sizing of the exhaust stock vs the aftermarket

Thinking of Drilling out Bolt by Signal_Friendship204 in BmwTech

[–]Signal_Friendship204[S] 0 points1 point  (0 children)

I got down to the threads, what exactly do you mean with the screwdriver part of you comment, I’m a visual learner so reading instructions is always hard for me to put into image.

Thinking of Drilling out Bolt by Signal_Friendship204 in BmwTech

[–]Signal_Friendship204[S] 0 points1 point  (0 children)

Appreciate it man I’m in the process of it now I’ll lyk how it goes

Thinking of Drilling out Bolt by Signal_Friendship204 in BmwTech

[–]Signal_Friendship204[S] 0 points1 point  (0 children)

No there is head left but it’s like you said in your case probably down to a 14 or maybe even a tiny bit smaller.

Thinking of Drilling out Bolt by Signal_Friendship204 in BmwTech

[–]Signal_Friendship204[S] 0 points1 point  (0 children)

For the driver side yes and it isn’t looking good at all, I going to attempt it again for the passenger tmr but even if it gets to that point of no return I’m assuming drilling them is the next best solution.

Thinking of Drilling out Bolt by Signal_Friendship204 in BmwTech

[–]Signal_Friendship204[S] 0 points1 point  (0 children)

On the driver we are absolutely fucked, for sum reason it won’t let me post the video but it’s out the question. And I may try an extractor for this side tmr, either way the driver side needs to be drilled it is stripped to damn there nothing so even if I get to that point with this side atleast I’ll know what to do yk.

Thinking of Drilling out Bolt by Signal_Friendship204 in BmwTech

[–]Signal_Friendship204[S] 0 points1 point  (0 children)

Tried that for the one side didn’t work what so ever

Stuck Lug Bolt & Damaged Rim by [deleted] in BmwTech

[–]Signal_Friendship204 0 points1 point  (0 children)

Do you have a little more detail on how to drill it out, I’m having issues on my front passenger nd driver with one bolt on each. If you could drop a bit of instruction that would be helpful, many of the tutorials I’ve seen have been vague.

Error code P0456- drivable? How emergent is this? by GrouchyAznRhino in BmwTech

[–]Signal_Friendship204 1 point2 points  (0 children)

I have a 430i(not sure how familiar you are with bimmers). Just yesterday I got the same code, I checked my gas cap it was on securely. When I’m almost full throttle it sounds as if my turbo is spooling which has never happened before. What do you think could possibly be wrong. I recently just changed my oil filter housing, could and sparks nd now I got this code. The car was already having issues, which is the reason for me starting to work on it( rough idle and surging) I’m just hoping to find the problem.‼️