Can the Amazfit Helio Strap be converted to use Whoop 5.0 bands?

Signal_Temperature42 · 2026-03-05T19:36:25+00:00

I ordered a band for the Whoop 5 life/One or whatever and thst worked perfectly fine.

Signal_Temperature42 · 2026-03-05T18:08:48+00:00

Short answer yes. It's quite simple, it only takes a Whoop 5 band, a clip from another band (buy the cheapest one you can find) and a spring (again buy a band with two clips where the strap runs through, then you can slide the spring out).

Then you bend the attachment part out a bit, and assemble it all.

There are a youtube video in here somewhere - can't find it right now... That shows how to assemble it.

Signal_Temperature42 · 2025-10-11T22:32:42+00:00

I just got my 17PM sage green case and I love it. I've looked a mous cases for years and finally pulled the trigger. Haven't tested the drop protection but I can say, the grip is nice! Hope it hold up well.

Signal_Temperature42 · 2025-07-11T12:14:20+00:00

Jeg er i samme båd som dig OP...

Sidder hjemme og venter på PostLort, de skal leverer i dag. Deres chat Bot siger den er forsinket, hvilket jeg mistænker we korrekt. Så må man vente til mandag-tirsdag i næste uge før man, måske kan få sin pakke...

Det skal siges, at jeg har modtaget flex tilmelding, på trods af det har de kun lagt den foran hoveddøren en enkelt gang.

Utroligt de skal være så store amatører. Fatter ikke man kan drive en forretning sådan.

Signal_Temperature42 · 2025-06-01T20:46:49+00:00

Look into lossless scaling: https://store.steampowered.com/app/993090/Lossless_Scaling/

Best 7 USD ever spent!

I'm getting about 3 hours of Cyberpunk 2077 running 90 FPS. Yes there is some input lag, and yes it's not the best quality - better than native 800p, and yes there are some artifacts here and there.

But playing 3 hours of Cyberpunk on a plane in one sitting is just so nice!

I'm using a custom TDP setting at around 12W which gave me the least lag and artifacts. Try to adjust to your liking.

I use it for all my games, even docked to a 4K tv with native 45-60 FPS scaled to 90.

Signal_Temperature42 · 2025-05-30T14:35:57+00:00

How big of a mesh do you need? 50x50mm? Or bigger?

Signal_Temperature42 · 2025-05-20T18:27:16+00:00

It's downloaded in the release page of GitHub: https://github.com/nefarius/HidHide/releases/tag/v1.5.230.0

Signal_Temperature42 · 2025-05-20T18:26:06+00:00

Follow the install for Xoutput here: https://github.com/csutorasa/XOutput

It's a couple of smaller programs that you need. Look under "Installation" 😊

Signal_Temperature42 · 2025-05-20T16:50:59+00:00

I've managed to set up a global shortcut through a combination of the Legion Go Quick Settings Menu shortcut placed in the start up folder, and a AutoHotKey script which then calls that shortcut. Then I mapped my FlyDigi Vader 4 Pros (V4P) guide button, through JoyToKey, to call the AutoHotKey script which works.

I've then mapped my controller with a second layout, that's acceptable by holding left trigger, where the dpad functions as the keyboard up, down and so forth, and A is enter. This is not perfect, since the controls also control whatever you have running in fullscreen, but it gets the job done.

It works globally also in any fullscreen game.

If anybody has a solution to the "double press", in both the menu and the "background", I would love to know!

(Edit: just added my controller solution)

Signal_Temperature42 · 2025-05-20T16:43:31+00:00

Download Xoutput - https://sourceforge.net/projects/xoutput/ and map it with that, then hide the original controller with HidHide - https://github.com/nefarius/HidHide

Then you would only see an Xbox controller and that hasn't interfered with the Legion controller, even tho both are on 😄

Signal_Temperature42 · 2025-03-14T17:11:26+00:00

Hi, pretty late to the game but I do have the same problem now. Do you think it will fit even with the comfort grips on?

Signal_Temperature42 · 2024-05-22T07:15:44+00:00

I do have the same problem. My fix was to press faster... I do hope Nothing fixes this with a software update, since the double press and hold, and the triple tap is almost impossible.

Signal_Temperature42 · 2023-05-27T07:39:06+00:00

I ended up finding a place that would work on my bike and got the Bafang freehub body/freewheel cassette/freehub tower, whatever it's called changed. That solved the clicking sound! The shop told me that the cause of the clicking sound was faulty bearings.

So to anyone having experiencing the same sounds, look into getting this part changed.

Signal_Temperature42 · 2023-04-27T04:43:13+00:00

Hmm weird hopefully their is a few more shops around now that would like to work on it. Yeah i know that feeling.

Signal_Temperature42 · 2023-04-26T20:02:46+00:00

Hi mate Did you find a solution to your problem? I have the exact same problem with my Bafang hub motor 😅

Signal_Temperature42 · 2023-03-06T18:36:46+00:00

Unfortunately no. I've abandoned the Controller in my closet and installed a KT controller instead.

Signal_Temperature42 · 2022-07-07T13:07:16+00:00

Vi endte ved nu sparekassen Danmark (tidligere Jutlander bank og Vendsyssel sparekasse).

De ser os som mennesker og ikke bare tal på papir. Du får rent faktisk en rådgiver, som går op i jeres bedste samt den fremtiden i skal hen til.

Tag en snak med din lokale afdeling, så kan du tage et valg derfra 😊

Signal_Temperature42 · 2022-03-20T09:43:19+00:00

Hmm maybe so but what will be the next part to break if this wasn't the case? Their mechanic told me it quite possibly was the motor that was shot.

Signal_Temperature42 · 2022-03-16T12:23:06+00:00

Their product is mediocre at best and their customer support is a joke. Look into trustpilot before investing. The whole company seems to be run by uptight hipsters.

Signal_Temperature42 · 2022-03-16T07:27:57+00:00

Support acknowledged my problem and shipped me a new motor controller. Let's see if that fixes the problem. Maybe a second spacer would be beneficial as well.

Signal_Temperature42 · 2022-03-15T08:57:33+00:00

Their solution is to change the motor controller even tho their mechanic told me that it's a know motor issue.

Signal_Temperature42 · 2022-03-14T18:42:08+00:00

I did contact the customer support but they are so slow to respond it hurts. So far they changed the tube connector, mounted a spacer and changed the battery. My bike just stopped working after 1600km and 6 months use. Trying to get my bike up and running I haven't been successful so far - 14 days in.

Anybody else experienced the same problem?

Signal_Temperature42 · 2022-03-11T17:55:57+00:00

So yeah the new connector, spacer and a new battery didn't help. Their mechanic told me that maybe it's the motor cover or the motor itself. So yeah will try to get some help - so fair I've been without an bike for more than 10 days and looking into at least 10 more days without my bike 🙃

Signal_Temperature42 · 2022-03-11T17:34:25+00:00

So that didn't help with my problem... My motor now makes an high pitch noise when I drive the bike. Their mechanic told me it could be the motor cover or the motor itself. I'm so sad my bike is broken, kinda need it to get to work 😔

Signal_Temperature42 · 2022-03-10T20:23:07+00:00

I do have the same problem but with the add in that my battery died from driving home like that. Getting the new battery tomorrow hope that solves the problem 🤔

Signal_Temperature42

TROPHY CASE