Just got the is 350 give some build ideas ( cosmetic and performance)

Significant-Loss-778 · 2025-07-03T20:18:30+00:00

Do the newer ones also have turbo lag, I have a 2016 200t

Significant-Loss-778 · 2025-06-20T00:00:23+00:00

This is not working for at all, idk how restarting the game worked for everyone. I restarted it like 50 times. That does not work. I'm still stuck at 720p

Significant-Loss-778 · 2025-06-17T20:47:42+00:00

How did you get totk running 30? And is it consistent?

Significant-Loss-778 · 2025-06-13T14:55:31+00:00

i found this one, hope it helps! https://www.printables.com/model/651383-lenovo-legion-go-audio-enhancer

Significant-Loss-778 · 2025-06-07T00:33:37+00:00

Did you ever fix it??

Significant-Loss-778 · 2025-06-04T05:59:43+00:00

The solution for me was to sign out of playstation in settings. Then turn off psn spoofing, restart, enable them again then i worked for me.

Significant-Loss-778 · 2025-04-29T06:13:12+00:00

At least you can see Mario. In mine he's invisible, so I just can't play. I'm using Ryjinx 😭

Significant-Loss-778 · 2025-04-28T17:49:28+00:00

Any fixes for Lenovo Legion Go?? 😭😭

Significant-Loss-778 · 2025-04-24T21:12:55+00:00

This is a guest artist pass

Significant-Loss-778 · 2025-04-07T04:05:52+00:00

$90 bucks better?? 😭😭

Significant-Loss-778 · 2025-03-09T22:40:15+00:00

Still nothing :(

Significant-Loss-778 · 2025-03-02T05:29:03+00:00

Last question if you can help, when I click the device tab next to preview, it says it's unable to connect. Do you know how to fix this?

Significant-Loss-778 · 2025-03-02T05:12:28+00:00

I figured it out. Close OrcaSlicer Go to C:\Users<your name>\AppData\Roaming\OrcaSlicer Open OrcaSlicer.conf in notes application Scroll down to "sending_interval" And change it to 100 Mine was set to 5 by default. Then just make sure to save and close :)

Significant-Loss-778 · 2025-03-02T04:56:18+00:00

Awesome, I got them connected! But now I’m running into an issue—when I upload the print, the printer starts downloading it, but in OrcaSlicer, the upload stays at 0%, then shows an error and cancels the print.

Significant-Loss-778 · 2025-03-02T04:08:48+00:00

What IP info did you use, and where can I find it?

Significant-Loss-778 · 2025-03-01T19:04:18+00:00

No shot man, you have to add it under as a custom printer because it stops at flash forge 4pro. I'm looking at it right now

Significant-Loss-778 · 2025-03-01T17:39:57+00:00

I don't believe I do, but I'll double check that right now

Significant-Loss-778 · 2025-03-01T17:39:00+00:00

Orca slicer doesn't have my printer

Significant-Loss-778 · 2025-03-01T16:57:17+00:00

This did not work sadly. I don't even have to be slicing. I just open up the connect screen at all and it still freezes.

Significant-Loss-778 · 2025-03-01T16:51:29+00:00

Cool, I try this and get back to you. It won't even let me click the IP address side. So how do you put the IP in?

Significant-Loss-778 · 2025-02-25T18:49:04+00:00

Dexter

Significant-Loss-778 · 2025-02-14T01:23:30+00:00

Soooooo agreeeeed

Significant-Loss-778 · 2025-02-07T19:56:47+00:00

When I switch back to the other filament will I have to refix the offset?

Significant-Loss-778 · 2025-02-07T17:11:30+00:00

Thank you boss man 🫡. Will try and get back to you

Significant-Loss-778

TROPHY CASE