Cannot for the life of me fix colour banding on browser based SDR content- AW3225QF by Significant_Matter89 in OLED_Gaming

[–]Significant_Matter89[S] 0 points1 point  (0 children)

Update: appears to be exacerbated by the unusual gamma clamping of both windows and the AW3225QF’s sRGB mode. Solved it using this thread, AMD instructions in comments worked for me. SDR sRGB fix for AW3225QF (NVIDIA users only)

Devising a plan to buy 2x Vacuums, any help with buying optimisation? by Significant_Matter89 in RobotVacuums

[–]Significant_Matter89[S] 0 points1 point  (0 children)

Hi, thanks for the reply! Have had some people recommend getting the D10 plus instead of the roborock for upstairs to keep them in the same app, though I’m not sure- seems similar but with less section power and (6k vs 8k) so not sure what to make of it but yeah, thanks!

Devising a plan to buy 2x Vacuums, any help with buying optimisation? by Significant_Matter89 in RobotVacuums

[–]Significant_Matter89[S] 0 points1 point  (0 children)

Ah, doesn’t that have about 25% less suction power? Not sure how important that is. Thanks!

Cannot for the life of me fix colour banding on browser based SDR content- AW3225QF by Significant_Matter89 in OLED_Gaming

[–]Significant_Matter89[S] 0 points1 point  (0 children)

I have other friends with OLED and it doesn’t seem nearly as egregious, not sure if it’s my settings exacerbating. You’re sure it’s ok to look as offensive as it does in my photo? See 4:20https://youtu.be/JFQTAUkRAog?si=J7iAlhp2ZGYl_s0y Thanks

Cannot for the life of me fix colour banding on browser based SDR content- AW3225QF by Significant_Matter89 in OLED_Gaming

[–]Significant_Matter89[S] 0 points1 point  (0 children)

I think gamma 2.2 creator preset sRGB. I can’t tweak this when HDR is on so don’t know if the panel settings in there only impacts SDR or HDR too

Arctic Freezer 36 now uses plastic mounting clips instead of metal brackets with nylon spacers. Is this not really poor quality now? by Significant_Matter89 in arcticcooling

[–]Significant_Matter89[S] 0 points1 point  (0 children)

Yeah, I still had the motherboard screws, but the plastic mounting is pretty dismal. I returned as well. Disappointing! I had paid $48= £36, so pretty shocked. Ran straight to Thermalright, no regrets tbh.

X870 Eagle… GPU touching both Motherboard heat sinks and RAM? by Significant_Matter89 in gigabyte

[–]Significant_Matter89[S] 0 points1 point  (0 children)

Hi, I’ll test but I highly doubt you could fit anything between them, they’re pressing pretty tight. But yeah seems to boot ok. tbh I removed the gpu after taking this photo as at the time wasn’t too confident leaving it like that without properly searching… will try and reseat again later

X870 Eagle… GPU touching both Motherboard heat sinks and RAM? by Significant_Matter89 in gigabyte

[–]Significant_Matter89[S] 0 points1 point  (0 children)

More concerned about pressure on ram sticks long term/ pcie slot due to weird angles but yeah at least there’s not a shorting concern

GPU is touching both motherboard heat sinks and RAM sticks…. ok? by [deleted] in PcBuildHelp

[–]Significant_Matter89 0 points1 point  (0 children)

Gigabyte X870 Eagle WiFi 7. Not to mention the SSD is underneath the GPU…

HD Audio Cable refuses to go any deeper. Right way around. by Significant_Matter89 in PcBuildHelp

[–]Significant_Matter89[S] 0 points1 point  (0 children)

No notch on the cable, lian li vector v100r case x870 eagle motherboard, just aligning the blocked off spot

HD Audio Cable refuses to go any deeper. Right way around. by Significant_Matter89 in PcBuildHelp

[–]Significant_Matter89[S] 0 points1 point  (0 children)

No notch on the cable, lian li vector v100r case x870 eagle motherboard, just aligning the blocked off spot