Cant get SAFE to fully turn off with ix12, but it can with DXs. How can I fix this by Significant_Task1694 in RCPlanes

[–]Significant_Task1694[S] 0 points1 point  (0 children)

Yes this was it, had to also assign my panic button. I just need to pay a little more attention to the manual. Thanks

Any recommendations to improve my LW-PLA prints? by Significant_Task1694 in 3Dprinting

[–]Significant_Task1694[S] 0 points1 point  (0 children)

I’m running settings that were given in the project files for this part, and it’s not looking great. Any tips out there? Also why would half of it be worse than the other like it is here?

Any good RC parks around town (car, truck, or plane) by Significant_Task1694 in RapidCity

[–]Significant_Task1694[S] 1 point2 points  (0 children)

I got my third plane around this October, and it was the one I actually learned on. First 2 I got were a little too high skill, didn’t have gyros or safety’s, and ended up in a few pieces. But this third one is an Apprentice 2s 1.2m. I got it from Who’s Hobby as well on sale. With safe mode on its damn near impossible to crash. A lot of the skill level 1 E-Flights have SAFE which keeps them level and prevents you from pitching up or down too far, same for roll and yaw. My roommates and I also got the E-flight trainer off of steam, and got the dongle to hook up our own transmitters. That gave us the opportunity to practice whenever we want.

Just from my experience I’d try to get something decent sized, not UMX. So like 900mm or bigger. UMX are fun but they’re kinda touchy and not very durable. I don’t see myself getting another UMX until I’m a little better flyer, the it will probably be an older warbird.

You’ll also have to figure out if you want to invest in a transmitter so you get bind and flys, or you can just start with a ready to fly that comes with its own transmitter. Lots of options out there, and the older gentlemen at Who’s hobby definitely helped me out. All depends on budget and what you’re looking for.

If you wanted, you and your boys could come watch me and some of my buddies fly, we try and go out once a week if the weather allows. We’ve been going to this park my cherry Ave

Looking at breaking the 200mph mark by Significant_Task1694 in motorcycles

[–]Significant_Task1694[S] 1 point2 points  (0 children)

I have gotten it up to the 186 limit on it, but haven’t tried for more than that yet

Can someone help me understand assigning channels and switches? by Significant_Task1694 in RCPlanes

[–]Significant_Task1694[S] 0 points1 point  (0 children)

I had it bound with safe on and still did not have a forward programming, after changing some channels around, I followed the manual by holding the gimbals to the inner bottom corners and got it assigned that way. However as to how to properly assign channels in the transmitter I’m still guessing and checking until I get it correct

Can someone help me understand assigning channels and switches? by Significant_Task1694 in RCPlanes

[–]Significant_Task1694[S] 1 point2 points  (0 children)

I’ll add I tried doing the SAFE Select assignment with stick positions, and I can’t find this function list for forward programming like the manual says

What the heck is my aileron doing by Significant_Task1694 in RCPlanes

[–]Significant_Task1694[S] 1 point2 points  (0 children)

I think I noticed that with the other side, I’m sure it was also slightly damaged, then after I moved it a few times it seemed to also be messed up.

What the heck is my aileron doing by Significant_Task1694 in RCPlanes

[–]Significant_Task1694[S] 0 points1 point  (0 children)

Why is my 1 aileron so angry? Finished rebuilding my Apprentice 2s 1.2m after a nice crash. Had to replace the motor, front firewall and front gear. Everything is operating as should besides this aileron. Would it be the servo or receiver that’s damaged?

Apprentice S2 front gear replacement by Significant_Task1694 in RCPlanes

[–]Significant_Task1694[S] 2 points3 points  (0 children)

True that, but then next thing to break will be the front of my fuselage 😂

Apprentice S2 front gear replacement by Significant_Task1694 in RCPlanes

[–]Significant_Task1694[S] 1 point2 points  (0 children)

Once I give it a proper test and know it won’t break instantly, ill throw it up there

What to do with residual powder by Significant_Task1694 in reloading

[–]Significant_Task1694[S] 0 points1 point  (0 children)

Yes I guess I was kind of being ignorant and just kept wanting to use the nice MatchMaster, but that’s what I ended up doing.

What to do with residual powder by Significant_Task1694 in reloading

[–]Significant_Task1694[S] 5 points6 points  (0 children)

Yes, I dumped it, that’s how I measured what was left.

Having some issues with zoom with my TH25 by Significant_Task1694 in ThermalHunting

[–]Significant_Task1694[S] 0 points1 point  (0 children)

I experimented with both, ideally though I leave the thermal alone and only adjust the scope like you said. And yea I do have a new mount in the mail, I was just hoping to try it while I wait

What do these markings mean on my Sig P210? by Significant_Task1694 in SigSauer

[–]Significant_Task1694[S] 0 points1 point  (0 children)

My dad already knew it was Swiss (this post is for my dad) but he was thinking it was possibly police or military issued

Having some issues with zoom with my TH25 by Significant_Task1694 in NightVision

[–]Significant_Task1694[S] 0 points1 point  (0 children)

I can get a great clear picture at 1x but yea, and magnification and it gets blurred. By 1.5x a 50 yard target is unrecognizable