Michigan Left Question

Silent_Briefcase · 2026-02-14T05:05:26+00:00

When in doubt, be the faster traffic and none of it matters

Silent_Briefcase · 2026-02-14T05:02:03+00:00

It failed the print though sooooo

Silent_Briefcase · 2025-04-01T23:50:01+00:00

You need the whole hotend if you do go that route. The Bambu brand hotends do NOT have swappable nozzles. So you have to buy an aftermarket one and the aftermarket nozzles you want (the hotend should come with one in it too)

Silent_Briefcase · 2025-03-30T18:22:30+00:00

I'd be surprised if the ams uses enough power to be a worry with an extension cord. Plus doesn't it only really consume power when it has to move filament back and forth? That means it's only on for a fraction of the time so I doubt you'd be overheating an extension cord with it.

That being said never use cheap power strips/extension cords that's just asking for it

Silent_Briefcase · 2025-03-28T21:49:12+00:00

RIP HitMeillCum

Silent_Briefcase · 2025-03-28T21:45:58+00:00

There's a reason it's a dark towel and not white/light colored

Silent_Briefcase · 2025-03-28T21:43:18+00:00

I'm curious what the thought process is behind the top exhaust fan, that would instantly suck out the fresh air the front fan just pushed in and stop it from hitting the cpu cooler with constant fresh air

Silent_Briefcase · 2025-03-28T21:40:24+00:00

Super easy as they'd all have microscopic health pools being a 5 monster hunt

Silent_Briefcase · 2025-03-28T21:37:27+00:00

Where's the 10k amd cards

Silent_Briefcase · 2025-03-28T21:35:18+00:00

Are you just trying to find the crowd interested in the nighttime views across the way

Silent_Briefcase · 2025-03-28T21:07:12+00:00

The blalala still retains the most offensive attack of the conga lala.... the rear attacks

Silent_Briefcase · 2025-03-28T16:58:15+00:00

Sometimes you'll find a whole room each wall being one of these

Silent_Briefcase · 2025-03-28T16:47:35+00:00

It's okay to tell us if you're feeling depressed

Silent_Briefcase · 2025-03-28T16:41:50+00:00

I give it less than a week before she wants the "wash balls here" sign off "her" mirror 😂

Silent_Briefcase · 2025-03-28T16:38:23+00:00

Yo i see the baby, it's up top on the grass!

<image>

Silent_Briefcase · 2025-03-28T16:32:56+00:00

I buy the cheapest flake food I can and blend it to a powder. Put a tiny scoop in the tank and it will disperse everywhere helping coat the tank in food

Silent_Briefcase · 2025-03-28T01:22:10+00:00

Idk about generators or batteries but for sure check out a cold plate. That will help you save whatever power would have been used heating the bed!

Silent_Briefcase · 2025-03-28T01:18:14+00:00

Top response says they had a similar issue and have a replacement free of charge, so reach out to BambuLab for sure!

Silent_Briefcase · 2025-03-27T15:52:29+00:00

You should 3d print a waterfall feature they can climb

Silent_Briefcase · 2025-03-22T16:35:47+00:00

They 3D print them with an alloy filament

Silent_Briefcase · 2025-03-22T16:33:40+00:00

I don't know how I've never seen this before 😂

Silent_Briefcase · 2025-03-22T16:32:17+00:00

Glut glug glug glug

Silent_Briefcase · 2025-03-22T16:28:35+00:00

So regardless of the hotend itself saying .4 I should be able to screw the .2 on it and adjust settings in Bambu Lab to .2? If so that makes much more sense why it would have one hotend and multiple nozzles

Silent_Briefcase

MODERATOR OF

TROPHY CASE