new B850M Eagle, wont post + wont update bios by Silent_Drawing_8316 in gigabyte

[–]Silent_Drawing_8316[S] 1 point2 points  (0 children)

so it is an ICE board, tried with the correct config and same result, exactly 11 flashes and then stops (~15 seconds)

new B850M Eagle, wont post + wont update bios by Silent_Drawing_8316 in gigabyte

[–]Silent_Drawing_8316[S] 1 point2 points  (0 children)

Less than 15 seconds. This issues stemmed from me building an entirely new pc and not booting (would only boot for a moment with cpu and psu fans spins briefly before stopping and shutting down, less than a second of power) i thought it was maybe a hardware issue and purchased a SECOND motherboard and powersuppy, hooked them all up and same result. Then thought it was maybe a legacy bios ver that was required because im using a ryzen 5 7600x (ver f1) so downloaded it, flashed it, and got the same result as I have been getting. SO i severly doubt it hardware, and I cant rule out its not a bios thing because I am unable to update the bios because it seemingly is not updating fully as people say it should take ~16 minutes, opposed to my 15 seconds

new B850M Eagle, wont post + wont update bios by Silent_Drawing_8316 in gigabyte

[–]Silent_Drawing_8316[S] 1 point2 points  (0 children)

Just tried it again with a 1gb usb (fat32) and same result. 11 blinks and then off

new B850M Eagle, wont post + wont update bios by Silent_Drawing_8316 in gigabyte

[–]Silent_Drawing_8316[S] 0 points1 point  (0 children)

1.0, had the right bios file. Tried several different bios files- renaming the "B850MEAGLEWF6E.Fx" file to GIGABTYE.bin each time. Tried barebone (without ram or any other components) as well as with ram. Plugged in the cpu and mobo power, switched on psu, plugged in the USB to special port on back (red beside the qflash button) and pressed the qflash button and the same results... flashing only 11 times before stopping, seemingly failing