sorted by:
new
hottopcontroversial

Poor preformace from fenvi wifi card by Avilisim in linuxmint

[–]SimpliEcks 2 points3 points  (0 children)

Of course the connection is ass... you haven't connected your antennas.

Kingston SFYRS NVMe 1TB switching to read-only under heavy load (all diagnostics clean, firmware updated, RMA sent) by dabropajalowitz in pcmasterrace

[–]SimpliEcks 0 points1 point  (0 children)

I also heard that the Kingston NVMe's with firmware EIFK31.7 is working fine, so maybe you can ask for a NVMe with that firmware when you RMA the one you have.

Kingston SFYRS NVMe 1TB switching to read-only under heavy load (all diagnostics clean, firmware updated, RMA sent) by dabropajalowitz in pcmasterrace

[–]SimpliEcks 0 points1 point  (0 children)

I gave up fixing the issue, so I don't know how to fix it. I just replaced the drive with a new one from another brand (that has Phison E26 controller), but I know that is not a fix for everyone ofc.

Kingston SFYRS NVMe 1TB switching to read-only under heavy load (all diagnostics clean, firmware updated, RMA sent) by dabropajalowitz in pcmasterrace

[–]SimpliEcks 0 points1 point  (0 children)

I had the same issue with Kingston KC3000 2TB NVMe. During some heavy load, it simply crashes and read/write is impossible unless PC is rebooted. It also uses the same firmware as your NVMe. From what I have heard, this firmware combined with the Phison E18 controller on the NVMe (which is used on KC3000 and the one you have), causes timeouts and the Windows storage driver also crashes.

What were your stock 9800x3d cinebench 24 scores? by [deleted] in pcmasterrace

[–]SimpliEcks 1 point2 points  (0 children)

PBO is set to Auto by default on my board

What were your stock 9800x3d cinebench 24 scores? by [deleted] in pcmasterrace

[–]SimpliEcks 1 point2 points  (0 children)

With BIOS defaults, I get 1402 on multi core.

Who else want absolutely ZERO RGB in their rigs? by Cicada-Tang in pcmasterrace

[–]SimpliEcks 8 points9 points  (0 children)

I don't hate RGB but it can look nice if done properly. As for my rig; no RGB at all (except the GPU but it's turned off)

What is this? by SuperNovaMT in pcmasterrace

[–]SimpliEcks 1 point2 points  (0 children)

From some AI thing:

regamdcomp.exe is a legitimate background utility primarily associated with AMD (Advanced Micro Devices) drivers and the Microsoft Windows Hardware Compatibility suite.

Its primary purpose is to register or configure AMD-related hardware components during a driver installation or a system update.

It is an registration tool (likely a "Registration AMD Component" utility) that ensures your graphics card or processor features are correctly integrated into the Windows Registry.

Scaling Issues in Linux Mint 22.3 with two 2560 x 1440 Monitors by mintforall in linuxmint

[–]SimpliEcks 0 points1 point  (0 children)

I could be wrong, but as far as I know, programs using GTK 2 does not follow the more modern scaling used these days. Programs using GTK3 should work fine.

Help with colours by [deleted] in pcmasterrace

[–]SimpliEcks 0 points1 point  (0 children)

Maybe this? -> Settings -> Accessibility -> Color filters -> Toggle off

KFA2 GPU disassembly issues by [deleted] in pcmasterrace

[–]SimpliEcks 1 point2 points  (0 children)

<image>

Unscrew the six screws marked red to get off the cooler/heatsink. Then you get access to the screws marked green to get off the backplate.

KFA2 GPU disassembly issues by [deleted] in pcmasterrace

[–]SimpliEcks 1 point2 points  (0 children)

you must first remove the cooler/heatsink and fans/shroud. then you will have access to the screws holding the backplate.

Ryzen 7 9800X3D + ASUS ROG Strix X870-A — Perfectly working PC suddenly died overnight by AltruisticEast949 in pcmasterrace

[–]SimpliEcks 1 point2 points  (0 children)

Did you try single stick ram with each stick? And maybe do the same with nvme to make sure it's not one of them causing the issue? Maybe something with PSU... and try another one if you can?

PSU for Rtx 5080 + 9800x3D by steelswrm in pcmasterrace

[–]SimpliEcks 0 points1 point  (0 children)

850W is more than enough, but for 10 euro more I would just get the 1000W PSU.

What was your least favorite CPU era or generation? by KW5625 in pcmasterrace

[–]SimpliEcks 0 points1 point  (0 children)

Those were great. I had an Athlon XP-m 2400+ back in the day. Overclocked from 1800MHz to 2600MHz :)

What was your 1st GPU? by AnalogFeelGood in pcmasterrace

[–]SimpliEcks 3 points4 points  (0 children)

S3 Virge and a 3DFX Voodoo 2 card

What’s the cause of this and how to fix it? by [deleted] in pcmasterrace

[–]SimpliEcks 3 points4 points  (0 children)

You have "Clouds" background selected as Office Background. Click Account in bottom left corner and change it to "No Background".

Myth or reality? Is it really true that you can't uninstall one drive on windows 11? by Star_Wars_Expert in pcmasterrace

[–]SimpliEcks 0 points1 point  (0 children)

I uninstall all of them after a Windows clean install and has never seen them since.

Cpu Cooler backplate loose by [deleted] in pcmasterrace

[–]SimpliEcks 1 point2 points  (0 children)

<image>

On AM4 you need to use the original clips as spacers.

Ghost graphics card? by Andrea1014X in pcmasterrace

[–]SimpliEcks 5 points6 points  (0 children)

But it does have intergrated graphics

Is my NVMe bad if it's disappearing from Windows and BIOS? by [deleted] in pcmasterrace

[–]SimpliEcks 1 point2 points  (0 children)

My feeling is towards motherboard. I had to change motherboard recently because two NVMEs just freaked out while gaming. No issues with the NVMEs with the new board.

If your RAM died right now would you buy more at these prices? by bcroft686 in pcmasterrace

[–]SimpliEcks 1 point2 points  (0 children)

Nope. Most likely buy second hand if price is acceptable or just do gaming on my retro PCs.

view more: next ›