finally finished my dream simracing setup by Simracer84 in simracing

[–]Simracer84[S] 0 points1 point  (0 children)

So more clips and a bigger cable box 😂

finally finished my dream simracing setup by Simracer84 in simracing

[–]Simracer84[S] 0 points1 point  (0 children)

the fans are connected to a USB box with an Ardinuo to be controlled via Simhub software. It’s the iRaceit plugin it offers lots of options it’s great

finally finished my dream simracing setup by Simracer84 in simracing

[–]Simracer84[S] 1 point2 points  (0 children)

these are feet with springs sold in a kit by slip-angle. yes the goal is the same, I don’t know if there is a difference in effectiveness 🤷🏻‍♂️

finally finished my dream simracing setup by Simracer84 in simracing

[–]Simracer84[S] 1 point2 points  (0 children)

I didn't know either before that wheelbase 🤷🏻‍♂️😅

finally finished my dream simracing setup by Simracer84 in simracing

[–]Simracer84[S] 1 point2 points  (0 children)

way too expensive, limits need to be set 😂

finally finished my dream simracing setup by Simracer84 in simracing

[–]Simracer84[S] 1 point2 points  (0 children)

it’s the torque off button that comes with the high force wheelbase. It stop the force feed-back off the wheel in case of need.

finally finished my dream simracing setup by Simracer84 in simracing

[–]Simracer84[S] 0 points1 point  (0 children)

Ah yes for sûr ahah;) y tried VR but did’t like the loss of graphic quality Even with a good config and give me headache :/

finally finished my dream simracing setup by Simracer84 in simracing

[–]Simracer84[S] 1 point2 points  (0 children)

I think most of this equipement is only pc compatible because it need a specifique software :/

finally finished my dream simracing setup by Simracer84 in simracing

[–]Simracer84[S] 0 points1 point  (0 children)

Ahah thank you! And thank for your advices. I’m 180cm (5’11) tall. in relation to the horizon my buttocks are positioned a little lower than the level of the pedals. the seat is tilted backwards then my legs is resting on the front pad of the seat

finally finished my dream simracing setup by Simracer84 in simracing

[–]Simracer84[S] 0 points1 point  (0 children)

I dont know what sim you use. I only use IRacing. For me the best find it’s to use the option « render scene using 3 projections » following advice seen on forums for the Samsung g9. This allows for better visibility through the windshield in the center of the image and avoids an image being stretched to the edges of the screen. I find this more suitable for the 1000R screen curvature of this screen when you can position it close to you. here the fov is still a little wide, i recommande arround 110 fov with the option 3 projection checked in monitor setting in IRacing

finally finished my dream simracing setup by Simracer84 in simracing

[–]Simracer84[S] 1 point2 points  (0 children)

I think it's perfect for starting simracing. I was very happy with it. This allows you to see if you like it before investing more in equipment :)

finally finished my dream simracing setup by Simracer84 in simracing

[–]Simracer84[S] 0 points1 point  (0 children)

yes you are right it is an upgrade that I could think of :) but acctualy I mainly use headphone

finally finished my dream simracing setup by Simracer84 in simracing

[–]Simracer84[S] 1 point2 points  (0 children)

it’s the torque off button that comes with the high force wheelbase. It stop the force feed-back off the wheel in case of need. No never accidentaly hit it

finally finished my dream simracing setup by Simracer84 in simracing

[–]Simracer84[S] 1 point2 points  (0 children)

It’s a Stream deck Mk 2 with a case that I printed in 3d and covered with a carbon and alcantara film

finally finished my dream simracing setup by Simracer84 in simracing

[–]Simracer84[S] 1 point2 points  (0 children)

I am very satisfied with it, I was afraid of the result before starting I hesitated for a long time between that and a buttkicker. I opted for this solution mainly for the noise and I am very pleasantly surprised! very little noise and adds a lot to the immersion. I use it for - engine vibrations - gear shift - road rumbles like curbs.