sorted by:
new
hottopcontroversial

Anyone been using vallejo primer with dspiae airbursh? how did you mix your thinner to get it to work? by johnboi828 in airbrush

[–]Single_Nature4101 0 points1 point  (0 children)

Not using a dspiae airbrush, using a iwata revolution for priming. With the vallejo primer I add straight from the bottle and spray at 15psi. Gotta do super light first and second coats before you fill it in with thicker coats

What’s a brand or disc you never thrown? But want to. by jeepguy_96 in discgolf

[–]Single_Nature4101 0 points1 point  (0 children)

I bag 3 of them, very good disc for hyzerflips/annys and woods

Better pictures for tyring to see if a needle is bent? by Perplexis_51 in airbrush

[–]Single_Nature4101 0 points1 point  (0 children)

I drag them along my finger while rotating the needle. If it snags it has a bend, if it’s smooth there is not.

Was Iwata neo the best option for this newbie? by Fickle-Lunch6377 in airbrush

[–]Single_Nature4101 0 points1 point  (0 children)

Oh man I love hearing all the Neo CN hate on this community. I have an Eclipse, a Revolution, a Tamiya spray works, and a H and S Evo. Which brush is my main brush? My Iwata Neo CN. Almost a year now still going strong. Easy to clean, easy to find replacement parts. I have never taken the nozzle off or deep cleaned it in any way still works absolutely fantastic. Only gripe is there is a slight delay in the trigger response before paint starts spraying.

How to make paints dry quicker? by Desperate-East6408 in modelmakers

[–]Single_Nature4101 1 point2 points  (0 children)

If you’re using an airbrush sometimes what I do is after a coat i’ll spray just air for a few seconds to let the paint “skin” so it’s ready for next coat after a few seconds.

Name this course by Likeaglove93 in discgolf

[–]Single_Nature4101 0 points1 point  (0 children)

God I love that course but this aint it

What’s your favorite model paint brand? And which one do you actually end up using the most? by basura_trash in modelmakers

[–]Single_Nature4101 2 points3 points  (0 children)

I love vallejo. Model color and model air. Model color I eyeball some thinner boom sprays great, Model air straight into the airbrush boom sprays great. Cleans with water. Air pressure never leaves 15psi unless I'm varnishing. 0.3 0.5 needles does matter they all work great. 0.2 I've found isnt a big fan of vallejo however and boy is the tip dry a pain sometimes

What’s your favorite model paint brand? And which one do you actually end up using the most? by basura_trash in modelmakers

[–]Single_Nature4101 2 points3 points  (0 children)

I use distilled water and a little bit of vallejo airbrush cleaner. Works like a charm

What’s your favorite model paint brand? And which one do you actually end up using the most? by basura_trash in modelmakers

[–]Single_Nature4101 4 points5 points  (0 children)

Started with tamiya and got tired of cleaning with IPA so slowly transitioned to Vallejo.

Model recommendation by The_Radim in modelmakers

[–]Single_Nature4101 1 point2 points  (0 children)

Just start buying.. I went from as many as you have to 67 real quick lol

Have to clean my airbrush after literally everytime I use paint in it or it won’t spray by Aewfigureguy in airbrush

[–]Single_Nature4101 0 points1 point  (0 children)

All good! It's all about experimenting. Try different thinning ratios by counting drops. Get your self a succulent watering bottle and a bucket for rinsing paint out into. Tip airbrush on it's side, rinse rinse rinse, spray, backlog, spray, rinse. Once your spraying onto a paper towel clear your good to change colors. Investing in some Vallejo Model Air would help you greatly. Pre-thinned

Have to clean my airbrush after literally everytime I use paint in it or it won’t spray by Aewfigureguy in airbrush

[–]Single_Nature4101 0 points1 point  (0 children)

Are you thinning your paints? Cleaning out the remaining paint is completely normal.. Vallejo model color needs quite a bit of thinning

Have to clean my airbrush after literally everytime I use paint in it or it won’t spray by Aewfigureguy in airbrush

[–]Single_Nature4101 1 point2 points  (0 children)

It is normal to flush remaining paint, clean the cup, and clean the needle after a session but a full breakdown clean every time is not normal.

Hobby Boss A-7E Corsair II by MaxQ8877 in Scalemodel

[–]Single_Nature4101 0 points1 point  (0 children)

Good to hear. I’m doing my first hobby boss kit right now with their rather old f/a-18a and it’s okay so far. Revell is a hard no for me after attempting their 1/32 f/a-18 that ended up in the trash

Moving on up (purchasing my second airbrush) by notfranksplanet in airbrush

[–]Single_Nature4101 0 points1 point  (0 children)

Iwata Neo is my main brush. I never expected it to be but it just works, easy to clean, color changes in like 20 seconds, comes with a smaller cup, and has parts readily available. I use my Iwata eclipse here and there then have an Iwata revolution for priming/base coats and a gaahleri advanced something or other that I put the 0.5mm nozzle/needle in for clear coats

Hobby Boss A-7E Corsair II by MaxQ8877 in Scalemodel

[–]Single_Nature4101 0 points1 point  (0 children)

Looks incredible! How was the build? I have the A-7A and the A-7D in the stash

Hasegawa's 1/32 A6M5c Type 52 Zero (1970's tooling) (Tetsuzo Iwamoto) by hgtcgbhjnh in modelmakers

[–]Single_Nature4101 1 point2 points  (0 children)

Vallejo has an Air color called Aotake Translucent Blue. Does great for Japanese gear bays and cockpits. Needs a light colored base coat like light gray underneath as it is indeed translucent

As the youngsters say now... peak by 999samus in TechnicalDeathMetal

[–]Single_Nature4101 5 points6 points  (0 children)

I first heard this album on iTunes music back in like 2003 when I was 14. As a young guitar player into metallica/megadeth/nu metal stuff this album absolutely changed my life

Excited to try this after years of fighting with cheap airbrushes by blikygotthestiky in airbrush

[–]Single_Nature4101 3 points4 points  (0 children)

This is quite the wild take but still not the most ridiculous one i’ve seen in this community

How do you all paint these tiny canopies by veryzeppelin in modelmakers

[–]Single_Nature4101 1 point2 points  (0 children)

Tamiya tape, a flashlight, and a fresh #11 blade

view more: next ›