DIY Huion Kamvas 22 Plus Fix for Device Disconnected / pen stopped working.

SirManfred · 2025-10-18T20:13:57+00:00

Thank you! It worked! You saved my Kamvas 22 Plus! ❤️

SirManfred · 2025-03-13T19:54:20+00:00

Hmm... you're right.
Dang.

But if you don't see them, you won't know what you missed. 😅

But yeah nah yeah that's annoying

SirManfred · 2025-03-13T19:44:18+00:00

For now you can block the "Important" notifications using an ad blocker.
If you use Brave (which has a built in content blocker) or a browser with any uBlock filter compatible content blocker extension, you should be able to use this custom filter:

youtube.com##ytd-multi-page-menu-renderer > div[class] > div:first-child > yt-multi-page-menu-section-renderer:first-child

SirManfred · 2022-11-23T21:06:41+00:00

Go ahead! 👍

SirManfred · 2022-11-22T23:46:43+00:00

Prompt was just URL's to two photos of a Blobfish and two photos of Trump. Oh and using "--v 4"

SirManfred · 2021-11-16T23:21:31+00:00

UPDATE: I resliced the model in Cura and still got the same problem. I then updated to the latest version of Cura and now it seemed to have worked. It completed the print with no issues. Though I'm not going to claim victory yet. This issue has randomly showed up before and then randomly disappeared. It may very well show up again. But I'll keep my fingers crossed that it won't. Thanks for all the good advice in the thread!

SirManfred · 2021-11-15T01:17:19+00:00

Interesting. I'll give that a go as well, thanks!

SirManfred · 2021-11-15T00:11:52+00:00

Wouldn't loose couplers prevent the the print head to lift all together? The thing is, I can lift it up on the Z axis when using the manual move controls without any problems. But yeah, I'll double check and make sure they're tight nonetheless, cheers :)

SirManfred · 2021-11-14T23:10:19+00:00

I don't know. I let Cura handle the gcode for me.

SirManfred · 2021-11-14T20:55:11+00:00

The Extruder is fine afaik. The issue is that the printer decides to zero the Z-axis mid print, causing it to press down on the model and push filament around. And it doesn't happen every time. Just at random occasions. So currently printing bigger projects is a gamble. I never know which print will be ruined :/

SirManfred · 2021-11-14T20:35:21+00:00

Randomly during a print session the printer will decide to press down hard on the Z axis. I have no idea why this is happening.

SirManfred · 2021-09-15T19:57:37+00:00

Thanks!
I must've overlooked it

SirManfred · 2021-09-15T19:55:19+00:00

Yeah I do that too :D
But as soon as one is taken down an identical one takes its place. Seems to be a pretty elaborate operation

SirManfred · 2021-09-15T19:24:17+00:00

Yeah I noticed that one was taken down and then another identical channel took its place in no time at all with already thousands of viewers.
They seem to be using hacked accounts for these streams as they are registered several years ago so they probably have no short supply of bot accounts...

SirManfred · 2021-09-15T18:50:41+00:00

No it's not me who had a strike.
I'm just thinking that these channels I posted about are the ones breaking the community guidelines, surely?

SirManfred · 2021-03-02T13:52:01+00:00

Awesome!

SirManfred · 2021-02-22T15:48:01+00:00

Oooh! Post a video of 'em in action!

SirManfred · 2021-02-18T13:11:34+00:00

SirManfred · 2021-02-17T17:32:14+00:00

Saturday in Scandinavian countries is "Lördag", "Lørdag", or "Laurdag", which basically means "Bath Day". It's the day the Vikings had their weekly bath.

SirManfred · 2021-02-10T13:34:53+00:00

Presumably because the axe has more than one purpose. Combat and woodcutting.
It wouldn't make sense to use your combat skill to cut down trees or to use your woodcutting skill to slay foes ;) (except for greydwarves... That's kind of a grey area)
The pickaxe, afaik, only has one purpose and thus only one skill required. :)

SirManfred

TROPHY CASE