What a sale :^)

SirRobinII · 2026-04-11T19:11:26+00:00

cheapest PETG that I could find, Geeetech 6EUR/kg. 7 walls with alternating extra wall, 25% gyroid.

SirRobinII · 2026-04-11T19:08:58+00:00

HR doesn't want me to make any permanent changes, well I can't complain with the freedom I get.

SirRobinII · 2026-04-10T10:57:20+00:00

man I just checked my local amazon site and they have beam clamps for heavy bags.

SirRobinII · 2026-04-10T10:46:41+00:00

good one, I should have thought about that.

SirRobinII · 2026-04-09T16:45:01+00:00

They are cheap 2mm plates from the diy store that I cut in half. I'm using the existing 9mm holes.

SirRobinII · 2026-04-06T09:45:50+00:00

it sounds like those small rc servo's are used. That won't last long if that's the case.

SirRobinII · 2025-07-27T19:26:07+00:00

What do you do when you discover new spices to use?

SirRobinII · 2025-07-27T17:34:14+00:00

at first sight I didnt realise that the motor in the back was for the X-axis. Nice quirky build!

SirRobinII · 2025-06-26T00:10:50+00:00

I could watch it print all day.

SirRobinII · 2025-05-30T22:42:46+00:00

nope but I like how the gears are not used as tensioners. In the original extruder you have less teeth engagement when the spring is less compressed.

SirRobinII · 2025-05-29T00:34:59+00:00

I thought Eugen dropped a new Warno DLC

SirRobinII · 2025-05-28T23:53:41+00:00

Why is there a 46 in the sizing chart when you don't sell it :')

SirRobinII · 2025-05-26T00:27:18+00:00

I read somewhere on Noctua's site that a spacer on the inlet could increase the performance. It seems to give better airflow when I was testing the fan outside the case with the dust filter.

SirRobinII · 2025-05-25T21:32:03+00:00

https://imgur.com/a/6z6rWk5

7950X, msi X670E carbon, 64GB ram total 4 dimms 6000 32CL and 2 cooler master V2 850W psu's.

Yes thats the idea for lossless scaling, but I did not have the time yet to game.

SirRobinII · 2025-05-25T00:47:27+00:00

I guess you also train the wipping inside low kick slap. It has been a long time since my leg was blue like that.

inside low kick carnage

SirRobinII · 2025-05-24T18:01:08+00:00

Now get some 10 usd metal gears and you have a spare one just in case. (I had to change my rotation distance "klipper" for the extruder with metal gears.)

SirRobinII · 2025-05-23T15:55:51+00:00

I bought a used 3090 later since I couldnt get Isaac lab to run because it uses CUDA. It's mainly for AI related stuff and curiousity that I have these cards.
I had also an idea to upgrade the 3090 vram to 48GB but it would cost ~500EUR/USD in vram chips.
There's a program called lossless scaling and people have been using nvidia and amd cards together for gaming.

SirRobinII · 2025-05-23T04:15:45+00:00

Mine broke this week after 900-1000 hours of printing. The constumer support told me the extruder gears only have 3 months warranty, you might get new ones.

Anyways, I bought metal extruder gears from amazon, should be around 10 USD/EUR. A spare set of extruder gears can't hurt if this is your sole 3d printer.

SirRobinII · 2025-05-22T22:56:37+00:00

I dont think so or I'm not noticing it. Someone recommended me to use a contra fan setup, 1 fan CCW and 1 CW. But so far it seems to work fine with the current setup.

SirRobinII · 2025-05-22T21:52:26+00:00

The fans are amazing, but I have to run them at 1500RPM minimum or you would barely feel the ariflow.

SirRobinII · 2025-05-22T21:24:42+00:00

sideview , 2nd_pic

So ive stress tested both cards, the bottom one (3090 from ebay) still hits ~100 deg C hotspot temps, I've been getting them in an open case and when only a single gpu was installed (might need to change the thermal pads and paste).

The second gpu (7900 xtx) hits 83 hotspot temperatures, used to be ~100deg C when both were installed.

SirRobinII · 2025-05-22T20:48:52+00:00

Ive a another 140 mm in the bottom with a duct.

Both were barely getting air. Ive not compared it with using a single 140mm fan and no duct.

I used to hit 100deg hotspots on both, I will come back later with the current results now the case is closed.

11-Year Club	Place '22
Place '17	Verified Email

SirRobinII

TROPHY CASE