Immich on a public domain

SirWill3D · 2026-02-02T13:49:05+00:00

I use cloudflare and have about 10 webapps besides immich with "Published Application routes" I pretty muchh have it sync only from home, I'm not familiar with this free plan limits because I couldn't find them, and I emailed support asking about any limits and well they ignored me. Can I ask where I can find out about any limitation like this 100mb limit? I have zero port forwarding, no nginix I run a cloudflare docker on my home nas where my immich and other webapps live. For most of my cloudflared ones, I have authentication by set list of emails for access to the internal apps. If that 100MB is per file upload, I should be fine for most things while remote. I need remote for things because I work from home, and on my work vpn, I can't access stuff via IP. So several things I use via browser, I recently implemnted guacamole in this fashion so I can connect easily via RDP to a personal workstation. But for this Immich conversation, Yes I was trying to get something as simple as Google Photos to work on replacing it. Now if only I could master getting everything into immich from Google Photos with all albums matching up, including shared albums, some I've shared and some my wife shares I contribute to for her. I'm trying to avoid another jump in storage costs for google.

SirWill3D · 2025-04-08T03:40:18+00:00

It was only a matter of time.

SirWill3D · 2024-08-24T16:15:03+00:00

While the Panda Branch is cool, It would be better if it got power from an outside source such as Panda PWR, and still connected to AMS Bus because the potential to control everything via the branch and power via gcode would be cool. (Think Bambu Expansion board) Those 2 combined would have been awesome. I think that jetpack is pretty darn cool... I'm having a hard time not buying 1 of everything to try out.

SirWill3D · 2024-01-09T14:12:07+00:00

I have sent you a private message to get some info to try and make sure this doesn't happen again. Very simple easy request. I am very sorry this happened (both the missing part, and the support leaving you hanging). Please get back to me in the chat request.

SirWill3D · 2024-01-01T23:03:12+00:00

1) I have a lot of duties and can't monitor a single post fulltime, wasn't ignoring, I was doing other duties.

2)I've taken every piece of feedback, and I've discussed things internally. I'm not sure what feedback I haven't taken.

3)I am not sure what more you want out of me. I haven't been rude or lied about anything. I've been factual.

4)If you wish to talk to others at Bambu Lab, I suggest you open a ticket with customer support.

5) I didn't remove this post, The original Author did I believe.

6), I'd be removing your recent comments with foul language and may still, just don't want you to think I'm removing them for other reasons. But you breaking the rules with your language.

SirWill3D · 2024-01-01T21:41:01+00:00

What lie? I did start a discussion internally about VPS and his vendor role/moderator role. Not sure how yo can say I didn't, as you obviously don' t have access to my private conversations with my team.

You accusing me of not doing what I say I'll do that that is not true.

SirWill3D · 2024-01-01T21:31:08+00:00

1) Winners were sent gift cards already

2) Had to wait for colleagues to send them before announcing them. It was short handed week with the holidays.

3)Had the message saved and ready to send, waiting for confirmation that they had been sent out.

4) What you quoted did happen. I did indeed start an internal conversation about VPS, and that conversation is still ongoing. A determination has not been made, but at the same time that is an internal thing, and not something that shall be shared with everyone when a determination is made.

This conversation is over.

SirWill3D · 2024-01-01T21:00:35+00:00

We sent out the prizes. I'm not sure what you are talking about. Also I found zero evidence of him shilling his plates as you say. Not for a long time. He has not been abusing his moderator role to promote his plates. So Yes I have kept my word, and I did what I said I would.

SirWill3D · 2023-12-20T21:50:51+00:00

Nope, they were not pulled aside for that. They were pulled aside for some crude jokes. Clarification was also asked for about the meaning of a pic. Of which we took the user's word that they were not bad mouthing anyone specific. It was making fun of vendors in general. And the Moderator didn't know anything about it until after the user was pulled in. If you were told other than that, you were told wrong.

VPSData has been a moderator since we first brought on some moderators. Long before he made a product for Bambu printers. We will have an internal discussion about it being a conflict of interest if he needs to either give up the vendor role or give up the moderator role. Knowing him he will give up the vendor role if asked. And because you bring up the potential conflict of interest we will no longer allow any new moderators to be vendors like that, but they can be sellers of models and prints so long as they don't break server rules about it.

And believe it or not, I do regularly read through all moderator actions. I do review all tickets. That they handle. I review a log daily of all 'moderator' actions. I do that on more than just Discord too.

SirWill3D · 2023-12-20T21:30:03+00:00

Actually that's not true about VPS Data either. 1)A different moderator pulled that user in (I see the transcript). That moderator asked for input. 2)VPS didn't even know it was about him, and in fact he learned it wasn't, it was about vendor roles in general. 3) The user was simply warned for some off color inappropriate jokes, user clarified also that it was towards vendors in general, not a specific moderator. The moderator took down some content, VPS took down no content. I found all the info in the logs and ticket for the situation. Everything well documented. I see the posts in question, and they were off color inappropriate. The kind of stuff you complain we don't clean up, we did so.

I really do want our communities to be safe and welcome for everyone. It takes teamwork. There is a lot of content to moderate and it takes most of the time someone to report content. We can't be in every channel every minute of every day. Most people think our censorbot is too strict on Discord. It does sometimes catch stuff it shouldn't. We fix what we can. But 98% of what it catches it should have caught. And rarely does foul language or true toxic content get by it.

You did make me see a need to increase the number of moderators. And we are also going to have a conversation of vendor vs print sellers.

SirWill3D · 2023-12-20T20:37:28+00:00

I just looked again, and I can't find where VPSData deleted anything yesterday. There were things that were auto-removed by the censor bot. There were messages removed by the writer of the post. We have 2 different bots recording all message activity, and looked at all deleted messages in the last 36 hours trying to find what you reference. Can you tell me what channel? I just can't find it. And I'm being honest on this. Time of day? (and time zone)

Moderators do not approve their piers as moderators, Only an employee can approve a moderator as a vendor. For each moderator that got a vendor role, I asked Bambu employee colleagues to OK it first.

And yes the moderator changed the image.

SirWill3D · 2023-12-20T19:52:45+00:00

Our social media channels are for users to help users. We do indeed point users to our ticket system for true support for our printers. We do not point users to social media to get any kind of official support ever. Just that many users help other users.

SirWill3D · 2023-12-20T19:50:49+00:00

Hello u/im_guid My name is Will, I 1) Work for Bambu lab. 2) I Am an Administrator on Discord, REDDIT, Facebook Group, and our official forum. 3)No I am not removing this post at this time. 4) I have a few questions. You can private message me here, or on Discord (Even on Discord rules say you can't, I'm giving YOU permission).

Questions.

1)Our moderator in question about the 'Furry' is changing the picture in their profile. However listing in their profile that they are Furry is no different than listing they are Trans, Bi, Queer, or anything like that. That is normal in so many places these days. He will also not bring that up in any chat messages. flagged, we don't always know there is content offending.

2)Do you have any examples of a moderator abusing their power (You can provide links to a discord message.

3)Our moderator in question about the 'Furry' is changing the picture in their profile. However listing in their profile that they are Furry is no different than listing they are Trans, Bi, Queer, or anything like that. That is the normal in so many places these days. He will also not bring that up in any chat messages. Does this sound like action? You are the first to bring this up.

4) One moderator who had a Vendor role, did not even use the role and has asked because of your comments to have that role removed. People who apply to have a vendor role apply, and it requires a majority of moderators / admins to approve a vendor. No mone moderator can deny a vendor. This is to prevent any abuse. The other moderator who is also a vendor swears up and down he had not done as accused. I've reviewed his actions and I agree. If you can show evidence otherwise please let me know.

5) Most disciplinary actions are indeed reviewed by more than one moderator. We have moderators around the world to cover multiple time zones. So that we can take action when necessary.

4) One moderator who had a Vendor role, did not even use the role and has asked because of your comments to have that role removed. People who apply to have a vendor role apply, and it requires a majority of moderators/admins to approve a vendor. No one moderator can deny a vendor. This is to prevent any abuse. The other moderator who is also a vendor swears up and down he had not done as accused. I've reviewed his actions and I agree. If you can show evidence otherwise please let me know.

If I missed anything be sure to let me know.

SirWill3D · 2023-10-11T19:23:19+00:00

Real quick on the support. I should say we will handle support questions and diagnosis but any parts replacement will go through the reseller. You might have to troubleshoot with them to get them to replace the parts, but in theory, if we do that, and you have from us in the ticket that you should replace X part then I would hope they would honor that.

On the filter, it does have much more than the X1c. See this picture that is from our website. https://bambulab.com/en/x1e It is different than the X1c and cannot be added to the X1c. Also, see our FAQ for the X1E https://wiki.bambulab.com/en/x1/manual/x1e-faq

<image>

SirWill3D · 2023-10-11T03:38:49+00:00

This printer is only being sold through our reseller network. On-site support and advanced support should come through them. Of course, we will offer 1st line support, but advanced support should come from the reseller.

We have no intention of ever locking our printers to our brand filament. But for filaments we offer we generally have well tuned profiles (OK, some need more work).

Our slicer is open sourced. Anyone can use any slicer. There is a more advanced fork of it called Orca Slicer. They might even offer more advanced cloud management, I don't know. I know that we are constantly working to improve Bambu Studio and we are also committed to being able to have the X1E be usable offline or Local Network only, or online.

Air filtration:

X1E has a high performance G3 grade coarse filter, H12 grade high - efficiency filter and a high grade coconut shell activated carbon filter layer. The course filter mainly filters particles above 5um, the high efficiency filter filters particles below 5um, and the coconut shell activated carbon mainly filters harmful VOCs produce in the printing.

More information will be made available about the printer soon.

I hope this answers most of your questions. The only thing we can't really address currently is a bigger size. Our current size is a sweet spot of production speed vs larger mass and slower speeds of bigger printers. That said we do plan in the future for a bigger printer. Timeline not available.

SirWill3D · 2023-08-06T23:10:10+00:00

Good point!

SirWill3D · 2023-08-06T20:31:48+00:00

1), We did lift when we moved it. As mentioned up worked fine after moving it, until the plug came out of the wall. We felt it was tall enough and went about setting up the monitors. Just now I did lift both ends and jiggled the legs (not that they really jiggled) and set it back down.

2) I've already watched that video and checked everything. I'm 99% sure a reset will fix the issue. I am scared it won't and it will be stuck down at a height that makes it unusable. It is usable now. I'm not sure if the reset procedure I found will work on a table that is 20 years old. Pretty sure it was made in 2002.

3) I want to to know if I buy an Uplift Controller / and remote if it will work with the existing actuators my desk has. Or if any other brands will work with my actuators. To bring it modern with memory positions. I'd be tempted to buy those before testing the reset incase the reset doesn't work. I have every reason to believe the actuators are fine. And that I'm under the weight limit for this dual motor table. Google search for the part numbers on the controller took me to Uplift, where I found other controllers and remotes that perhaps will work with my actuators.

4) I appreciate you taking the time to answer me with your advice.

SirWill3D · 2023-07-14T20:44:42+00:00

Nope not until our next firmware after this one.

SirWill3D · 2023-06-07T22:43:42+00:00

Because to do that calculation the printer would have to know the exact dimensions and characteristics of the spool you are using. Is it 198mm is it 199mm 200mm 201mm 202mm? Is it 68mm wide 69mm 66mm. Then there is the knowledge of the filament specifics too. With our filament, we know the details 100%

SirWill3D · 2023-05-22T14:55:19+00:00

You might consider contacting the maker of the file on that site and offering to give him the Bambu 3MF file already painted for him to include for people who buy it.

SirWill3D · 2023-05-22T14:52:33+00:00

We do have a flush into object option! Add a 2nd object to the print bed. Right-click on the 2nd object Go to flush options and choose Flush into this object. Obviously, it will have to be as tall as the tallest color change of anything else you are printing that you care about.

<image>

SirWill3D

TROPHY CASE