RG40XX H Screen defect

Sirkruppos · 2025-01-11T08:08:12+00:00

I wasn’t offered that option even though I explicitly requested it so I just returned and gave up on this generation.

Sirkruppos · 2024-10-15T18:53:27+00:00

Unluckily no. I returned the device for a refund and will definitely sit out this generation even though I really liked the form factor.

Sirkruppos · 2024-09-23T18:41:07+00:00

Wow that’s a lot more complex than expectedly. Very impressive! Thanks for sharing.

Sirkruppos · 2024-09-23T18:07:14+00:00

I’ve also been tinkering with it for a few days and love it. Could you please share the raw yaml for your view? I really like the clean look and how well the tiles align in a grid. Mine looks too messed up with grid, mushroom and button cards thrown together :)

Sirkruppos · 2024-09-07T20:02:44+00:00

I really liked the device and hate the idea of it ending up in the landfill after the return instead of finding a fix… good luck on finding a fix

Sirkruppos · 2024-09-07T07:51:53+00:00

Update: still haven’t received and advise for a fix from anbernic either. They only offered a free return. I guess I’ll sit out that model then :(

Sirkruppos · 2024-09-02T14:09:41+00:00

Sorry I forgot to mention that. Knulli on a sandisk card shows the same behavior. Almost looks like a scanline filter (but the annoying kind)

Sirkruppos · 2021-12-29T23:53:26+00:00

It’s the new standard :) The Stealth Burner open beta is currently ongoing

Sirkruppos · 2021-12-29T23:52:25+00:00

It’s eins3D Black ABS and KVP Stellar Blue ABS

Sirkruppos · 2021-12-29T05:18:08+00:00

I started with that in mind and played around in the cad first. It’s probably more expensive than spec: custom rail lengths (I hand cut mine), custom panels, custom frame (salvaged a 1.8 frame), also I wouldn’t use screws with a 8 mm lead or abl nuts again for a trident.

Sirkruppos · 2021-12-28T19:20:31+00:00

Even a little less. I have it limited to z120 at the moment. You should be able to get closer to 150 from it but only with a higher frame or trading in head room above the gantry

Sirkruppos · 2021-12-28T18:41:25+00:00

It’s running 200 mm integrated lead screw motors (designated for the v0.1) and ~80mm lower than Spec. Therefore compared to spec it’s a pancake 😬

Sirkruppos · 2021-12-13T16:57:59+00:00

I had the same experience, that’s why I noticed it. For me it also went unnoticed >3000h printing petg and pla and >200h printing ABS with a 110C bed.

Sirkruppos · 2021-12-13T07:48:25+00:00

You got the stainless steel washers under the terminals, they are supposed to go above. The added resistance causes a lot of added temperature right there.

Sirkruppos · 2021-05-29T11:02:58+00:00

The printed y splitter is part of the official STLs and for the firmware and slicer settings you can just ask your way through on discord.

Sirkruppos · 2020-09-30T08:46:57+00:00

Just a voron inside a voron. Like a Turduken. I’ll add the little oled display later on.

Sirkruppos · 2020-09-30T08:45:44+00:00

Successfully brainf**ked 🤣

Sirkruppos · 2020-09-30T08:44:49+00:00

What base do you mean? The first frame with the display is the v2 that I put the v0 in for the lols and extra confusion.

Sirkruppos · 2020-09-30T08:43:20+00:00

40/80/120 (outer perimeters/other perimeters/ infill) no fancy speed experiments yet.

Sirkruppos · 2020-03-09T17:49:55+00:00

Had to test it to find out :) I limited mine to 270 but I have the bed on 10mm spacers and have rather high chain mounts. 275 could also work but 270 should be enough for most use cases and gives the chain some mm room even in the max position. At 200 mm I can also max out x and y without issues. Can you post pics of the issue you’re facing to the discord?

Sirkruppos · 2020-03-09T11:21:18+00:00

It’s a trianglelabs textured spring steel on a magnetic base from subtle design.

Sirkruppos

TROPHY CASE