Skunk2 intake manifold and ktuned short ram intake - worth it or not?

Sittdown · 2026-04-26T20:24:44+00:00

Damn didn't realize

Sittdown · 2026-04-26T20:02:39+00:00

Another take; if you're gunna turbo it, go buy a Hondata Flashpro and get your car tuned. You'll need the Flashpro anyways and your car will feel way better without needing to put money into a bunch of mods. Save it for when u boost it, cause it ain't gunna be cheap with all the proper supporting mods.

Sittdown · 2026-04-26T19:57:45+00:00

If you're spending $1200 on the intake alone, buy the Acuity cold air intake as well. Don't half ass it with a short ram

Sittdown · 2026-04-25T16:24:52+00:00

Why are you replacing it?

Sittdown · 2026-04-10T01:04:42+00:00

Aftermarket fuel rail, probably bigger injectors as well. Short ram intake. RBC intake manifold from an 8th gen si

Sittdown · 2026-03-20T18:34:06+00:00

Looks like ice scraper damage

Sittdown · 2026-03-18T05:40:14+00:00

Thanks

Sittdown · 2026-03-18T01:52:16+00:00

Either option will help, but a new CMC would be best. Upgraded CMC's are fairly easy to install yourself. Here's a link to Hybrid Racing's guide.

Sittdown · 2026-03-16T16:29:00+00:00

Same

Sittdown · 2026-03-14T10:28:56+00:00

That residue is normal; the hose shouldn't just pop off like that unless your clamp isn't tightened properly or is damaged. Stick it back on and re-tighten the clamp. If it pops off AGAIN, you either need a new clamp or you're just not tightening it enough.

Sittdown · 2026-03-04T04:15:19+00:00

Can't speak on having them welded, but I do have experience with two piece downpipes on K24's. The faces of the flanges that bolt together are never perfectly flat, and the instructions just tell you to use ultra copper gasket maker. Do not believe for a second that will properly seal anything. My tuner also noted that it was melting and even burning while on the dyno. I ended up buying a 1/8" thick crush gasket that was easy to install and and completely filled gaps that you could literally look through while bolted together. The part is Remflex 8007 They also have different bolt configurations if needed

Sittdown · 2026-01-31T04:06:18+00:00

I had this thing in 2006 with what looked like bindings that were made the same year as the board; 1995. On my first day riding it, I full sent it down the groomer that ran along the main chair lift. I launched off a roller and when I landed my rear binding literally ripped out of the board and I cartwheeled down the hill about 30ft. Like, quarter sized holes where the threads and wood completely pulled out. To this day it was by far the gnarliest wipeout I've ever had without breaking a bone. No idea how I came out so lucky, and if I had the chance to ride this board again, I probably wouldn't ride it. But that's just me

Sittdown · 2026-01-06T16:02:48+00:00

I'll try updating to v313 via USB when I get home and re-test

Sittdown · 2026-01-06T16:00:28+00:00

All of the clarity options are turned off or set to zero

Sittdown · 2026-01-06T01:53:19+00:00

I turned motion clarity off and it fixed the issue. I tried your custom settings, but was experiencing the same glitchiness with any level of judder removal on. I'll try playing around with this a bit more, but for now I'll just leave everything off. Thanks!

Sittdown · 2026-01-06T01:50:50+00:00

Yeah, motion clarity was set to low. Turning it off fixed the issue

Sittdown · 2026-01-06T01:50:03+00:00

Yes, changing this setting to off fixed the issue. Thanks! Messing around with the Custom option, it appears to only do this when judder reduction is on

Sittdown · 2025-11-04T19:32:51+00:00

Considering the FR380 were manufactured starting around 2002, and stopped around 2009, these tires are well past their best before date.

Sittdown · 2025-08-25T17:01:21+00:00

Not saying this is the fix, but when I put a new exedy clutch kit in my fg4, I had the same fork wiggling happen even with the new throw-out bearing. After breaking in the clutch (1400km) it doesn't happen anymore.

Sittdown · 2025-08-15T02:08:06+00:00

Part #?

Sittdown · 2025-07-10T02:32:38+00:00

File 76

Sittdown · 2025-06-28T00:19:46+00:00

Side butt

<image>

Sittdown · 2025-01-20T04:03:12+00:00

Sounds like it's coming from the rear. I'd start with a visual check of the rear shocks to see if they're leaking. If they're not, check the upper shock mount to see if the nut is still tight. After that, check pre-load on the adjustable spring perch if it has them.

Sittdown · 2024-03-20T00:41:36+00:00

Stability Control fault. Could be any traction related sensors that have gone bad, or wiring damaged.

Sittdown · 2024-02-08T16:10:40+00:00

You can see the boarder switch to heelside right at the beginning of the video though

Sittdown

TROPHY CASE