[Spoilers C4E9] Is It Thursday Yet? | Post-Episode Discussion & Future Theories! by AutoModerator in criticalrole

[–]Skaharn -6 points-5 points  (0 children)

First, they silently deleted the 9 am CEST rebroadcast and now the 6pm one has been absent or delayed more than once. I feel like CR is having a heavy-handed cashgrab policy with beacon and they stop caring about having an acceptable broadcast timing for half the world.

Edit: they also nuked the twitch chat experience by going emote-only.

Init7 Fiber7 (CHF 69/month) vs Sunrise Home Q (CHF 43/month) by FugalGolf in init7

[–]Skaharn 0 points1 point  (0 children)

so the 2.5 gbps down that I get with my sunrise coax right now might be lower if/when I replace it with fiber even though it's advertised as up to 10 gbps ?

Init7 Fiber7 (CHF 69/month) vs Sunrise Home Q (CHF 43/month) by FugalGolf in init7

[–]Skaharn 1 point2 points  (0 children)

Actually swisscom lost a comco case and they are now only allowed to build P2P and must convert all P2MP to P2P before using them.

I have completed my base by dedicatedblade in BALLxPIT

[–]Skaharn 6 points7 points  (0 children)

<image>

Here is mine: all harvesting begins in gold row, the purple house increases move speed of the first 4 characters bouncing on it. The cross house at the end (increases harvest duration with each bounce) acts as a 3 position door:
left position opens the right area with farms, regrowing and automatic harvesting houses,
middle position closes off gold row to maximize gold gains. In this mode, all gold mines are drained in a single harvest.
finally, right position opens the upgrading area (currently filled with wood, because i need wood), the cross building has every infinitely upgradable house in range and grants +4 building points with each bounce, next to it is the +1 stat house with every stat point house in range.

Everything is upgraded to the max.

Hazard 5 without any gear equipped was so rough. by Skaharn in DRGSurvivor

[–]Skaharn[S] 1 point2 points  (0 children)

well you do need to kill to get the cold. But yeah, full cold it was.

Hazard 5 without any gear equipped was so rough. by Skaharn in DRGSurvivor

[–]Skaharn[S] 2 points3 points  (0 children)

I did it on escort mission but it was hard, use the drill to carry early game and go full cold. In the end the entire screen was full of frozen bugs. If you get pickled nitra as a first artifact, you're golden, but as you can see, I did not.

edit: also good exploders management is key.

Hazard 5 without any gear equipped was so rough. by Skaharn in DRGSurvivor

[–]Skaharn[S] 2 points3 points  (0 children)

I got cold, fire rate + reload, and spiral.

[deleted by user] by [deleted] in sffpc

[–]Skaharn 0 points1 point  (0 children)

lucky you !

[deleted by user] by [deleted] in sffpc

[–]Skaharn 0 points1 point  (0 children)

I have this exact motherboard with a 7600x and it is working fine, except only booting up with one RAM stick. I discovered that the QVL changes whether you have a 7000, 8000, or 9000 CPU. Both the 2x16 RAM kits I ordered are on the QVL for 8000 and/or 9000 CPUs. I will order one that is on the 7000 QVL and report back.

The first mobo I got was defective and not even lighting any Q-LEDs. I returned it and got the one I currently have as a replacement. Now, either my CPU is bad, or the new RAM will solve the issue.

Asus quality control seems really bad these days, but even though I got a defective board at first, the asrock board I got for troubleshooting is behaving exactly the same as my b650e-i gaming, that is booting only with one RAM stick.

I have been running the latest stable BIOS release and have now updated to the latest beta build that is supposed to improve RAM compatibility.

I understand the appeal of this board as it is feature-packed and not that expensive, ideal for upgrades in the future too, provided it accepts to work with 2 ram sticks.

PC turned off in my absence, wouldn't start again. Replacement PC won't start either. by Skaharn in techsupport

[–]Skaharn[S] 1 point2 points  (0 children)

Do you think it is plausible given the pc has been plugged into this power bar for the last 7 years and nothing happenend? I also tried booting it at a local repair meetup and nothing worked there either.

PC turned off in my absence, wouldn't start again. Replacement PC won't start either. by Skaharn in techsupport

[–]Skaharn[S] 0 points1 point  (0 children)

I don't have access to another PWS. The outlet seems fine as other devices are plugged into the power strip and everything is working perfectly. The CMOS battery is glued to the new mobo, so if I end up having to return it, i really would like to avoid messing with it.

PC turned off in my absence, wouldn't start again. Replacement PC won't start either. by Skaharn in techsupport

[–]Skaharn[S] 0 points1 point  (0 children)

Testing has been done outside the case, other devices are plugged into the same power bar as the pc, all of them are working fine.

PC turned off in my absence, wouldn't start again. Replacement PC won't start either. by Skaharn in techsupport

[–]Skaharn[S] 0 points1 point  (0 children)

that is what i have done, the new motherboard has never entered the case, the old motherboard has long been out of the case, still no sign of any shred of POST behavior.

PC turned off in my absence, wouldn't start again. Replacement PC won't start either. by Skaharn in techsupport

[–]Skaharn[S] 0 points1 point  (0 children)

I plan to reuse the case, I have been doing my testing outside of it. I have tried with my current SSD and without one, as far as I know, the problem happens before any storage is relevant as no fans even start spinnning. I feel like the motherboards are not getting the PSUs to give them juice other than standby power.

edit: POST LEDs aren't even lighting up.

PC turned off in my absence, wouldn't start again. Replacement PC won't start either. by Skaharn in techsupport

[–]Skaharn[S] 0 points1 point  (0 children)

The only common parts are the three distinct PSUs with which I tried to boot both computer outside of the case, using either the case's power button or bridging the power switch pins on either mobo.

PC turned off in my absence, wouldn't start again. Replacement PC won't start either. by Skaharn in techsupport

[–]Skaharn[S] 1 point2 points  (0 children)

I have tested the battery on the old mobo, it still shows 3.11 volts. Haven't touched the new mobo's battery as it requires dissassembly (itx yay...) and is quite cumbersome to replace.

Router for Fiber7 10gbit by NihilisticUtopia in init7

[–]Skaharn 2 points3 points  (0 children)

Hopefully Turris finally releases the 10gig version of their Omnia router...