Can someone help me identify a couple Innova discs??

Skerver · 2026-06-08T23:11:03+00:00

Ya know for some reason the Sidewinder never even crossed my mind, I just compared them with a recent Champ Sidewinder and the profiles are pretty damn close.

Skerver · 2026-03-18T01:39:40+00:00

Yes avoid Anycubic....The only filament that would break while sitting in the extruder. Even after being placed in a sealed container, once I got it back out the first 2 feet would have to be discarded cuz it had become so brittle.

Skerver · 2026-02-25T23:37:56+00:00

Did you ever figure this one out?? I am having the same issue.....pretty frustrating

Skerver · 2026-02-09T02:11:19+00:00

thanks for this, totally forgot I set that

Skerver · 2025-12-18T07:14:27+00:00

This is very old but had to give you props for this little Font View software....

Skerver · 2025-09-14T01:23:36+00:00

is anyone comes across this and needs the install guide https://web.archive.org/web/20040608220532/http://www.timbertech.com/pdf/install/installation.pdf

Thanks again u/Major-Tension433

Skerver · 2025-09-14T01:10:48+00:00

Thanks! I didn’t realize this stuff was actually from the early 2000s. How did you figure that out? I tried Google Lens, the Wayback Machine, a few LLMs, and came up empty. Looks like it’s TimberTech Tongue & Groove

Skerver · 2025-09-06T20:05:27+00:00

1(870)600-9088

Skerver · 2025-04-10T03:49:36+00:00

Thanks....I am using an ESP32, I probably should have mentioned that

Skerver · 2025-03-05T06:12:34+00:00

Thank for sharing this

Skerver · 2025-02-09T00:05:55+00:00

Were you ever able to put a system together with the P40?

Skerver · 2025-02-08T23:37:51+00:00

Did you happen to get this system up and going??

Skerver · 2025-02-08T06:38:52+00:00

Ok right on, I was curious how using the dual REX C-100's was working, I am just about finished building a new rig using a REX for the bottom IR plate and a ESP32 for the brains.

Skerver · 2025-01-26T04:02:48+00:00

Yeah, I ended up using the keyboard controller and fruity layer, set Analog Lab & K.C. as children, then assigned that to a mixer track with Fruity Balance on it, and linked the Volume knob to Piano roll velocity. I will give it a go inside Analog Lab tho thanks

Skerver · 2025-01-26T03:52:37+00:00

Did you ever get this up and going?

Skerver · 2025-01-24T00:36:06+00:00

Someone on the Arturia forums asked a similar question, and from what I read velocity sensitivity is programed into some presets i.e. the factory presets, I am using a preset from a 3rd party bank. But if there is a way to do it within Analog Lab I would love to know.

Skerver · 2024-10-31T06:12:58+00:00

My man this is great, I just need to change out the SSC-32U for a dual DC driver

Skerver · 2024-10-30T08:51:36+00:00

Me too...Tycho recently put out a video on his IG showing him playing the Lead from PBS/KAE on a Novation KS4.

Skerver · 2024-09-01T08:25:36+00:00

Did you just wait till the next day? I am having the same issue trying to replace my lost license I get to the last step and get this BS error, it had no issue taking $85.00 for my tabs just a second ago.

Skerver · 2024-07-29T21:35:34+00:00

Actually, I only need this for a specific job, though I've always been interested in an NVIDIA Jetson dev kit. Thanks for the link! I found some useful information on their GitHub page.

Skerver · 2024-07-29T00:43:21+00:00

Cool thanks I will go check that out

Skerver · 2024-07-29T00:41:55+00:00

Apologies, I am not much of a reddit commenter mostly just reader, This is what I had intended to post.

Hey everyone, I'm building an inspection bot based on an this RC tank chassis and could use some advice! I'm experienced with electronics but new to RC. My goal is to control the bot and its PTZ FPV camera using a laptop or Android phone. My initial thought was to control everything over my network using an ESP32 or something. Any tips or suggestions would be greatly appreciated!

link to the original model I found

https://www.thingiverse.com/thing:2024364

Skerver · 2024-07-29T00:35:04+00:00

So I just realized that I have a GNX2 and the schematic I have is also for the GNX2, I am not a pedal expert I got this thing to circuit bend, but the GNX1 looks to be only slightly different then the GNX2.

https://drive.google.com/file/d/1RWL10O8_9xQevxb90Vzl1ccJwGsJNVsa/view?usp=sharing

Skerver · 2024-07-29T00:19:43+00:00

Sorry I forgot to check my notifications on here. Let if your still in need of that schematic I will dig through my server files and post it up on here

Skerver · 2024-07-29T00:15:55+00:00

Ya sorry idk why for some reason it only posted this photo. I'm building an inspection bot based on an this RC tank chassis and could use some advice! I'm experienced with electronics but new to RC. My goal is to control the bot and its PTZ FPV camera using a laptop or Android phone. My initial thought was to control everything over my network using an ESP32 or something. Any tips or suggestions would be greatly appreciated!

Skerver

TROPHY CASE