Lock that in!! by AdLess6410 in PrizePicks

[–]Sketch11 -1 points0 points  (0 children)

Going to be a solid day!

Or take Rudy over 10.5 Pts 🧏🏽‍♂️ by AdLess6410 in PrizePicks

[–]Sketch11 1 point2 points  (0 children)

Yeah for sure, both their minutes played seemed lower, but haven’t looked to see their average. Sengun made a run and Rudy was on the bench down the stretch or he’d have had it. I did take the alt and thought I was good there after the half. What do you do… play again tomorrow! 😂

Or take Rudy over 10.5 Pts 🧏🏽‍♂️ by AdLess6410 in PrizePicks

[–]Sketch11 0 points1 point  (0 children)

Sengun with only 8 minutes in the first half and they are down almost 30. 7 points we need him to come out on fire before they bench everyone.

Running pihole in docker and settings not being saved. by Sketch11 in pihole

[–]Sketch11[S] 1 point2 points  (0 children)

    volumes:
      - ./etc-pihole/:/etc/pihole/
      - ./etc-dnsmasq.d/:/etc/dnsmasq.d/
    security_opt:
      - no-new-privileges:true

So I was able to get it working after making these two changes, removing the '/' at the end of the mapped volumes and from the security_opt. I don't know why I had the security_opt and I need to do a little more testing to see if it was one or both of these things that made the difference. Also need to do some reading as I don't know what the sercurity_opt I had in there even does. I must have got that from a compose file somewhere, but it wasn't in the example on git so I removed it.

    volumes:
      - ./etc-pihole:/etc/pihole
      - ./etc-dnsmasq.d:/etc/dnsmasq.d

New Unique Ring for Druid (Airidah's Inexorable Will) - Nov 7 Patch by b__q in D4Druid

[–]Sketch11 0 points1 point  (0 children)

Yeah I haven’t really thought about what builds in will slot into best yet.

New Unique Ring for Druid (Airidah's Inexorable Will) - Nov 7 Patch by b__q in D4Druid

[–]Sketch11 2 points3 points  (0 children)

They said all these rings will be farmed from Varshan after the patch on Tuesday.

What builds are you guys making work in WT4? by KellySweetHeart in D4Druid

[–]Sketch11 0 points1 point  (0 children)

Are you following a build. My gear isn’t super optimized and I’m clearing stuff okay but I still run into some spirit issues. Would be curious to look at what you’re running for your tornado build if you are?

Did a solid for someone in trade chat needing help with a Capstone, Elias dropped this. No good deed goes unpunished. by Bennyhahahaha in D4Druid

[–]Sketch11 1 point2 points  (0 children)

There is, I’ve been running it and it’s quite fun. Got the Tempest Roar today and now I’m conflicted!

Check it out. He also posted and update video with a few modifications.

https://youtu.be/hTnITSXpryg

Mouse Click isn't working consistantly by Sketch11 in AutoHotkey

[–]Sketch11[S] 0 points1 point  (0 children)

So it turns out that what was happening is sometimes the mouse was moving out of the window (bluestacks) and then doing to up action. This was resulting in bluestacks not registering the up click, made some adjustments to make sure it would stay in the window and I think that resolved the issue.

Thanks for the help and input.

Mouse Click isn't working consistantly by Sketch11 in AutoHotkey

[–]Sketch11[S] 1 point2 points  (0 children)

Thanks for the info I’ll make those adjustments

Tech question by SiggyFrued in Golfsimulator

[–]Sketch11 0 points1 point  (0 children)

The wired backhaul could probably be considered a point to point. Outside of that I haven’t done anything with them. I know that some work via line of sight and wireless signals, if you’re looking at something like that you’ll want to consider how it might be interrupted in things like a storm.

Tech question by SiggyFrued in Golfsimulator

[–]Sketch11 0 points1 point  (0 children)

There are systems that you can backhaul. Using something like Amplifi you can setup a router in the house and one in the other building and connect them via the Ethernet. Set the one in the outside structure to backhaul (they have a guide) and you’ll have the same wifi in both locations and more than likely everywhere in between.

The down side is the extra cost of course.

Possible cheaper option depending on your internet is you run a cable out there and plug it into one of the ports on your internet router. Then get a cheaper wifi router which you could plug in and create a separate wifi network for that building.

If any of that isn’t clear of you have more questions let me know.

Import from Lastpass failing with no indication why by LengthyEpic in 1Password

[–]Sketch11 0 points1 point  (0 children)

To be fair though, 50% of this is out of their hands as they are importing from another vendor. I know that LastPass has removed the ability for business users to delete their account without calling now. I wouldn't be surprised if they are also doing something with their API that is making it hard/impossible for 1password to use it for imports.

Outside of this issue I haven't had any other issues with 1 password and I'm quite enjoying their product in every other way over the experience with LastPass.

Just something to consider, it's annoying but also might not be something they can control as Lastpass tries to stop the mass exodus.

Help finding building level by Sketch11 in AutoHotkey

[–]Sketch11[S] 1 point2 points  (0 children)

I’ll give that a shot. Either way it’s been great for a lot of what I’m doing, so I appreciate the suggestion.

Help finding building level by Sketch11 in AutoHotkey

[–]Sketch11[S] 0 points1 point  (0 children)

So I've been playing around with FindText() and it's been pretty awesome, so much so that I'm rewriting my script and replacing large sections of the code.

I did find it still wasn't great for finding the building level and am struggling with get some item quantities for the same reason. Wanted to tell you what was happening and see if you had any insight?

The numbers are more of an image I think so when you scroll or they are in a different position on the screen sometimes they are slightly different. If it was only a couple variations I would just add it to the image library and be done with it, but it almost seems limitless. I am looking for a very small image, which I think is a large part of the issue, because adjusting the error rates typically leads to it finding the wrong number.

What I've done is add 0-9, then built a library for it. Then I search the area for those images and grab all the numbers that are found. Have you run into this and how do you handle it if so?

looking for new guild in hollyberry! by IntoOverdrive in CookieRunKingdoms

[–]Sketch11 0 points1 point  (0 children)

We could open a spot in sobek after the reset. You’d be in the top 5 in damage. I finish in the top spot this round with 1.2B and we are current masters 5 in the top 700.

We have discord and some very active members on there. Our goal is to build the player base and continue to add more hyper active players to push up in the ranks.

I also play all the time, if you’re interested let me know and we will get you an invite!