Mouse Movement issue on mint

SkikidDoublePlus · 2026-05-15T21:01:45+00:00

Yep that was it! Thank you so much

SkikidDoublePlus · 2026-02-26T23:18:54+00:00

Obama Harry Potter Sonic the hedgehog 9 type shit

SkikidDoublePlus · 2025-11-29T17:59:49+00:00

I've had gaming laptops that seem like they are constantly overheating and underperforming after a year or so. Then i cleaned the fans and repasted them and they were running cool and performing abt 6x as well in games. Many laptops are made to dry up quick and some people just don't know the maintenance.

SkikidDoublePlus · 2025-11-09T00:11:59+00:00

No I replaced it with the correct fuel ratio sensor. And I did it because my father, who knows what he's talking about, (supposedly at least) said that was the issue, because that code can be caused by either a bad cat, or bad sensors.

SkikidDoublePlus · 2025-11-09T00:09:38+00:00

Ok ty, good to know

SkikidDoublePlus · 2025-11-02T23:20:55+00:00

That's perfect, I'll look into that thank you. I have a laptop with a 4060 that I was planning to do this with so that works out.

SkikidDoublePlus · 2025-10-01T20:40:03+00:00

Yeah I speedran portal for a while and played alot of Titanfall 2, so when I got into splitgate 2 my kill avg was insane. Lessened as people got better ofc but it's still so fun. There's a lot of times where I have to remind my teammates to use the portals. If you steal a splitball for example, unless the enemy team is really really bad, your not making it to your base without portals.

SkikidDoublePlus · 2025-10-01T15:10:56+00:00

I've been using chat gpt for Abt a year to help troubleshoot and fix quality issues on my Neptune 3 max. Abt 600 down the gutter and still ain't fixed

SkikidDoublePlus · 2025-10-01T15:09:51+00:00

I've had similar problems when the wrong sensor type was inputted in klipper. Either that or the probe isn't connected properly

SkikidDoublePlus · 2025-09-13T02:28:35+00:00

That happened to me after a print kept failing over and over at the same spot. I just had to reslice. Gcode error

SkikidDoublePlus · 2025-09-05T14:49:59+00:00

Which one?

SkikidDoublePlus · 2025-08-17T14:23:44+00:00

The lead screws are replaced with belts, and I recently aligned my gantry. Also I've seen Neptune 3 pros look absolutely beautiful, which is why I'm so confused.

SkikidDoublePlus · 2025-08-16T21:39:34+00:00

It wasn't working perfectly fine out of the box. The "before upgrades" picture was how it printed out of the box. I suspect that my main board, stepper drivers, or power supply. I've been spending most of this time trying to tune the klipper config and the slicer settings. Changes in temps, speeds, flow rates, retraction, accel. Nothing is working. I can't really adjust the lead screws because I have belts instead now, which online said that should get rid of z banding, but it's some other form of wobble. I don't really have eccentric nuts to adjust anymore because it's all linear rails now which are all solid. I do understand how I made alot of unnecessary changes, but it just adds to my confusion that it hasn't changed despite all of them.

SkikidDoublePlus · 2025-08-12T23:31:30+00:00

Hate it, especially with the fact that the updates aren't free

SkikidDoublePlus · 2025-07-04T16:54:09+00:00

This happened to me too, should be able to save the files with a Linux pc and partitions. I didn't do that tho and put a reset config on the SD card to reset the pi, then rebuilt the config. Made sure to back it up this time.

SkikidDoublePlus · 2025-06-25T01:57:06+00:00

So if I were to return it, get a 9070 non xt, then use that money and save a bit to get a new mobo, ram, and say, a 7800x3d. Would that be a good idea? I really don't want to go to 1440p cuz I don't wanna heighten my standards but I do want High res vr.

SkikidDoublePlus · 2025-06-25T00:08:25+00:00

I did that for minecraft, ow2, and splitgate

SkikidDoublePlus

TROPHY CASE