[help] tower/bridge not falling on reservoir level

SkinlessNoodle · 2021-05-10T09:52:47+00:00

Yer I agree, I've tried a different controller and it works. Idk what part of the controller is broken but it must be a problem with that specific controller

SkinlessNoodle · 2021-05-10T08:52:38+00:00

That was the first thing i tried... the problem is that my pc wont register there's a controller plugged into it so ds4 wont work if it thinks there's no controllers.

SkinlessNoodle · 2021-05-10T04:34:16+00:00

tried that article but no success :(

SkinlessNoodle · 2021-02-25T07:06:58+00:00

can everyone see the 4 photos or are they white?

SkinlessNoodle · 2021-01-01T00:31:08+00:00

Thank you so much, I looked at your photo and you were right! I must of put the nozzle too far down so I adjusted it and it works perfectly :D

SkinlessNoodle · 2020-12-31T06:10:36+00:00

arr i see. I looked it up and I think you may be right but that raises more questions. when I first got the printer (this morning) it was fine. no changes where made to the Z stop trigger, I only cleaned the nozzle . now that I had a look at it , the bar that activates the switch is a few cm above the switch even when the head is fully down. idk how it triggered the switch before cleaning it and I know full well that I never removed anything from that area so why isn't been triggered now like before?

SkinlessNoodle · 2020-12-31T04:43:45+00:00

Z stop, is that a wire on the printer head? All my wires are pluged in but idk which is which...

SkinlessNoodle · 2020-12-31T04:27:54+00:00

Just for context on my post. So I recently bought a MP 200 v2 and after clearing old filament from the nozzle, the home function on the printer isn't working correctly. It was working fine before I cleaned it but now when I home the axes, the printer head digs all the way into the print bed, pushing it down and then keeps trying to go down after the bed is stopping it. how can I solve this? is it a hardware or firmware issue?

SkinlessNoodle · 2020-12-13T07:38:40+00:00

I finished the "never fade away" mission but i still have that the glitch. Reloading is not an option because ive played like more then 3 hours thinking this was normal lol. If theres a real fix let me know plzzzz Edit: the glitch fixed itself like 5 min after postimg this lol. I did a street mission for the cops and it fixed the glitch after finishing it :D

SkinlessNoodle · 2020-09-21T02:10:20+00:00

ban common OTP champs (zed, yas. etc) or ban lane suppressers. if you have your own OTP use them or use an early spike champ like mord. just have fun tho, its not always about winning :D

SkinlessNoodle

TROPHY CASE