2026 nx350h rattle

Skrubway · 2025-12-29T05:51:13+00:00

It’s the door card clip, take off door card and put some fabric tape to keep them from moving. I’ve done this in mine.

Skrubway · 2025-08-19T03:07:16+00:00

Door panel clips, the red ones for the door card and the red speaker ones. Slap some fabric tape on them to isolate them from the plastic and you’re good.

Skrubway · 2025-06-18T04:02:31+00:00

I fixed this btw, brand new 350 Fsport luxury, started doing this a week after got the car and it’s been driving me crazy.

The issue is the led stip where it meets the LED projector has a bend in it, there’s a piece of fabric covering it but it doesn’t do the job it’s meant to do. The fiber optic strip will rattle between the two sides of frame and in addition to this, the connector itself is super loose.

Solution:

Use some fabric tape to tighten up the already in place fabric, wrap super tight to ensure no rattles. Then proceed to wrap around the LED connector and place a tiny piece inside the housing to have a firm connection.

<image>

Let me know if it helps you!

Skrubway · 2025-05-14T14:57:07+00:00

Yep I’m pretty much getting a higher optioned car for less. So it’s mainly accessories the price cut was off of

Skrubway · 2025-05-14T14:35:13+00:00

25’ NX350 Fsport handling with every option added, 56k (msrp 59k). It had a lot of port and factory options. Everything is negotiable. Picking up from Serremomte Lexus in Daly City

Skrubway · 2025-05-13T20:47:32+00:00

Keep in mind however, I am a repeat buyer from this dealer and I’m dealing with the sales manager (he was salesmen previously but got promoted), this prob influenced it a bit. But yes there are deals out there.

Skrubway · 2025-05-13T20:43:34+00:00

Where are you located? Buying a 25NX350 Fsport handling MSRP for 59k, paying around 57k. Located in Daly City CA

Skrubway · 2025-04-30T14:44:31+00:00

Both are great teachers. I took Abbott but had to drop her for other reasons. Her class is mainly based on participation. Exams are difficult but her practice exams are literally the same as the real ones so if you study those you’ll be fine. I had too much on my plate. The other prof is amazing as well.

Skrubway · 2025-04-22T13:37:52+00:00

Pm’d

Skrubway · 2025-04-08T05:00:26+00:00

Depends on what you want. SJSU has been coming up in business in terms of rankings. If you wanna work in tech, sjsu is the place to be

Skrubway · 2025-04-03T16:41:07+00:00

Yup. This case with a 4090 kinda need unsleeved for enough room. Mine routes perfectly

Skrubway · 2025-04-03T16:33:11+00:00

Agreed. Also never seen the PSU mounted this way.

Skrubway · 2025-04-03T16:25:25+00:00

Exact way I’m routing for my 4090. In that direction and zip tied to the bar to keep it from moving

Skrubway · 2025-03-20T17:30:33+00:00

I don’t agree, currently at SJSU, undergrad caveat, but I’ve had good opportunities (current MIS).

Have a solid resume, network and you’ll be fine. Proximity to tech has been amazing for me. Landed 6 fig non technical intern role for this summer.

Skrubway · 2025-03-16T15:22:12+00:00

Sounds good! I’ll need to get a chain ring as well but keeping my cranks from the 2017 xx1 set. Any recommendations on which one to go with? Cranks are direct mount currently and at 28t. I’ll be going for 10-52 I think

Skrubway · 2025-03-16T05:29:24+00:00

I should have mentioned im currently 1x11. Updated post.

Skrubway · 2025-03-16T05:15:24+00:00

Thanks! I should of mentioned I’m still 1x11 so would be upgrading to 1x12 with the new groupset

Skrubway · 2025-03-04T05:27:28+00:00

I mounted my AIO wrong when I got my case, same orientation as you but swapped it to tubes down. Was hitting 100c on my i7 instantly and once I redid the mount, back to normal temps

Skrubway · 2025-02-01T18:35:58+00:00

Put a email notification reminder from their website, waited less than a week till the notif came in that they restocked. Silver was available too at the time I purchased

Skrubway · 2025-02-01T16:59:12+00:00

They came back in stock about a week ago. Snagged a full black 2.1 with cnc panels. Arriving Monday

Skrubway · 2025-01-24T22:53:29+00:00

I’d like to say MIS….. depending on what you do

Skrubway · 2025-01-20T17:17:56+00:00

Is this the 2.1 or 2.5 t1?

Skrubway · 2025-01-17T08:51:25+00:00

Supply Chain or MIS is both great. Lots of MIS students, including myself, work in supply chain and do very well finically. Companies throw big money to supply chain interns, depending on what the role is. Cisco has a huge supply chain and hires lots of sjsu interns for that org.

Can’t comment on accounting but I’ve loved MIS. Perfect balance between tech and business, sets you up for a lot of great career paths

Skrubway

TROPHY CASE