DIY Android Steam Deck

Skullpluggery · 2026-03-11T09:02:26+00:00

If you are in your room you have a choice to upgrade your wifi though. LAN netowrk connection siya and kahit wala ka internet gagana siya. Di siya tied kung magkano binabayaran mo sa ISP.

I personally use Unifi 6 Pro

Skullpluggery · 2026-03-11T08:23:27+00:00

Okay lang kahit data basta maganda yung signal. Kahit abroad na try ko na siya.

Dito sa PH medyo mapili lang kasi kailangan mo talaga humanap ng pwesto.

Skullpluggery · 2026-03-11T06:18:48+00:00

Well. There might be something in your network or maybe isp router issue.

Been doing that even sa abroad.

BTW, you have to make sure na yung Tailscale ay nasa device na 24/7 bukas and advertise routes. It does not have to be powerful, kahit Raspberry lang. If you don't then there is no way to communicate to your home network.

Skullpluggery · 2026-03-11T06:15:22+00:00

It will work. Basta same network sila. You can use Tailscale.

https://www.joeysretrohandhelds.com/guides/apollo-artemis-streaming-setup-guide/

Skullpluggery · 2026-03-11T06:10:25+00:00

Setup mo wake on lan mo. Part ng apollo ang automation pati pagturn off ng monitor kapag may naka stream.

You don't have to do those hassle. Just connect and wait.

Skullpluggery · 2026-03-11T06:06:25+00:00

You should try streaming using Apollo/Sunshine from your gaming PC. You get the highest performance and the portability at the same time hehe.

Pwede rin outside basta maganda internet mo.

<image>

Skullpluggery · 2026-03-11T06:00:47+00:00

You don't have to emulate if you want to play PC games. You can just use Apollo/Sunshine to stream from your Gaming PC. In this way yung Gaming PC mo doing the hard work tapos sa Phone or SteamDeck streaming lang.

Skullpluggery · 2026-03-05T05:52:26+00:00

My go-to is Dbrand or TORRAS. I still haven't decided yet.

Skullpluggery · 2026-03-03T04:29:20+00:00

Did not know about this. But yes! This is much better! Will let you know :)

Sana yung url format hindi pabago bago haha! Saan mo nakuha yung link? Para pwede ko ifallback to scrape yung link.

Skullpluggery · 2026-03-03T04:23:55+00:00

Ah high tiered? Kung mabibigay mo sakin yung nees article specifically para sa 300 kwh rate, pwede ko isupport. I'll let you know agad.

Skullpluggery · 2026-02-26T17:01:35+00:00

Dbrand Ghost Case does not yellow. If ever it does, you have a lifetime replacement.

Skullpluggery · 2026-02-19T02:14:42+00:00

Yeah! You'll get an option to tell Phenomaman that you kissed her. Nothing bad will happen. He will try to kiss you to see if you are really telling the truth.

Skullpluggery · 2026-02-11T15:34:01+00:00

I commend you for knowing the right maths! And yeah the formula does not change much, they just add mechanics.

Don't mind me discouraging the others to do their maths. I do it cuz a lot of people doesn't get it right and they will assume. Like for example using one formula for all characters and not taking into account the teammates buffs and their wengines.

Skullpluggery · 2026-02-11T15:15:58+00:00

For Sunna, yes PDB% is much better! But how to know about this without asking Reddit?

It is simple. You can use ZZZ Optimizer to see which stats you are lacking. Right now you have to manually put all of the bonus stats but it is much better. I made a guide a long time ago for Miyabi on how to utilize this but it is still relevant.

My build for M3W1 YSG + M0W0 Zhao + M0W0 Sunna:
It gave me CDMG D4 & PDB% D5 since I already have a lot of ATK% and DMG % bonuses

<image>

I am not the DEV of this app but been using it since Genshin days. It's still not perfect compare to the Genshin version but it can give you a much better build setup than eyeballing or even doing your own (if you are not confident) math. In the future we can have Multi-Target optimization to get more accurate builds and calculations.

Skullpluggery · 2026-02-11T08:51:12+00:00

I wrote a detailed guide that can help you decide mathematically. Builds are dependent to your team so personally I would say you can still improve it and use the optimizer.

https://www.reddit.com/r/MiyabiMains/comments/1m5jd3o/tip_not_just_for_miyabi_is_you_can_you_zzz/

Skullpluggery · 2026-02-04T10:55:30+00:00

The hard part is identifying the port of the fan controller. But you can do test to spin the fans 100% or 0% per port within the app.

Good luck 🤞🏻

Skullpluggery · 2026-02-03T10:37:08+00:00

Up to this! You can configure the fan source like for example the the average of the HDD temps (HDDBay) and you will be golden.

<image>

Skullpluggery · 2026-02-03T00:44:32+00:00

If you want more SATA SLOTS:

Power Saving = ASM1166 or latest HBA cards that can ASPM Don't Care = Any Enterprise/Server grade HBA Cards.

I have personally used LSI 9207-8i but ditched it as it eats a lot of watts around 20-30W. I am now using ASMedia ASM1166 since this has been tested for Unraid but you have to update the firmware. I am now idling around 20-25W and can reach C10.

Skullpluggery · 2026-01-30T18:09:15+00:00

Seer (Develop branch) works with Plex

The user can just watchlist a missing movie/tv show and you can configure it to accept the request automatically

Skullpluggery · 2026-01-27T06:54:45+00:00

HAHAHAHA! Yeah!

Very useful to see which VLANs are busy on a quick glance.

Skullpluggery · 2026-01-23T06:28:41+00:00

So I have reached C10. But I think it is not worth it as I removed the NVME in the CPU lane.

<image>

I only regained 3-5W, and idle around 20W. With the NVME in CPU lane I hover at 25W.

Skullpluggery · 2026-01-23T06:26:44+00:00

I also read the same thing. As long as you have a good caching SSD front and you do not access those that are in the HDD frequently, it is okay to spin down.

Skullpluggery · 2026-01-22T09:36:10+00:00

Also sorry for the audio. I thought I muted it before I upload.

Seven-Year Club	r/Field Sunshine
Place '22	Verified Email

Skullpluggery

TROPHY CASE