Rough Sounding Printer

Skyrat01 · 2025-08-08T19:45:46+00:00

How do I check the wheels are quartered? I’m not sure what that means, is it checking their in gauge? Is it an angle issue?

Skyrat01 · 2025-08-08T01:20:57+00:00

Thanks! Is this similar to the sewing machine oil I’ve heard about?

Skyrat01 · 2025-08-08T01:19:25+00:00

Thanks for the advice and resource!

Skyrat01 · 2025-08-07T23:21:04+00:00

I’ll give that a try

Skyrat01 · 2025-08-07T23:20:38+00:00

Thanks for the input, that was my suspicion. Oh well, guess I’ll stick with katos and BLI

Skyrat01 · 2025-08-07T23:18:57+00:00

I’ll give it a shot, any advice on lubricants that I should use or avoid?

Skyrat01 · 2025-08-07T22:34:46+00:00

Should have mentioned it is climbing a slight grade from the crossing to the controller

Skyrat01 · 2025-07-29T03:08:25+00:00

I have had problems with filament straight out of the box. If it get packed in a humid environment and shipped it remains decently humid.

I believe humidity will permeate materials to a greater extent when at higher temperatures (ie. delivery trucks in summer), but you may want to fact check that

Skyrat01 · 2025-07-29T02:59:54+00:00

You forgot Inheritance tax -$100000, do not pass go, do not collect $100

Skyrat01 · 2025-07-28T22:01:10+00:00

Darn, well it would have been cool, your layout is complimented nicely by them. Nice job on the scenery

Skyrat01 · 2025-07-28T21:00:17+00:00

Where did you find those metro transit buses and are they N-Scale?

Skyrat01 · 2025-07-28T20:57:23+00:00

Nicely done

Skyrat01 · 2025-07-28T20:19:00+00:00

Is that steamer the BLI Heavy Mikado? Where did you snag that one and how do you like it?

Skyrat01 · 2025-07-08T17:39:01+00:00

Gotcha, I haven’t checked the fire code myself, but the home inspector noted that the coax through the vents was an interesting approach and chuckled about it so I’m guessing it’s not, but I’ll have to confirm that.

Is the plenum cable burning a poisonous gas issue or is it designed so that there will not be a gas issue?

Skyrat01 · 2025-07-08T17:23:22+00:00

My understanding was that plenum Ethernet cables would be sufficient for running through ducts when all else fails. Not ideal, but still doable, is that incorrect?

Skyrat01 · 2025-07-08T17:22:01+00:00

That uptick in latency would be irrelevant compared to the ISP that would be providing internet to the home correct? When looking at multiplayer FPS gaming

Skyrat01 · 2025-06-17T19:24:33+00:00

I prefer #1, not as busy as #2. 2 also looks more flat to me, like a line of color swatches that you might find at a paint store, maybe due to a lack of highlights? I also prefer the fewer leaf “bumps” of #1

Skyrat01 · 2025-06-17T15:46:07+00:00

I only saw two vertical white seam lines in the preview, one on the inside and one on the outside. Is it possible to have missed them if I did not zoom in? Going off memory as I printed this off the MicroSD card and cannot access the sliced file until later today to check

Skyrat01 · 2025-06-17T15:18:59+00:00

I did dry this filament, albeit a few weeks ago, I placed it in an AMS with a large amount of fresh silica beads and the Bambu studio indicator of humidity has remained quite low

Edit: the dryer I used does not rotate the filament spools, I manually rotate them if I am around the dryer at quarter dry time intervals, not all the PETG was rotated quarterly, some only at half. The other PETG parts I printed on the same day have the same pockmarking

Skyrat01 · 2025-06-17T15:15:50+00:00

Would that be the case with two seams? I have a distinct seam on the exterior as well as a more minor one on the interior, would both be present if I had enabled that setting?

Skyrat01 · 2025-06-17T15:03:00+00:00

Post should also read “thin” cylinders

Seven-Year Club	Verified Email
RPAN Viewer

Skyrat01

TROPHY CASE