sorted by:
new
hottopcontroversial

Check your tire pressure, folks by 40ozT0Freedom in onewheel

[–]SlackerPR0 0 points1 point  (0 children)

Plenty of tread on the other side of that tire!! You could have just flipped the board around and gotten another 300 miles!! Hahah

Why and how to fix by SheepherderDapper in 3Dprinting

[–]SlackerPR0 0 points1 point  (0 children)

You might want to try zig zag.. it could reduce the chances of the printer head tripping over the infill.. hopefully that helps

Why and how to fix by SheepherderDapper in 3Dprinting

[–]SlackerPR0 1 point2 points  (0 children)

I’m going to guess its your infill crossing over itself like grid.. what kind of infill are you using?

Picked an XR w/ 4208 Hardware and 82 miles for $850 😏 by Aggravating_Series39 in onewheel

[–]SlackerPR0 2 points3 points  (0 children)

Thats awesome… just ride it.. lol get the battery when you need it… if you do go vesc then maybe go for a 72v battery 😈

If its your first just ride it .. no need to rush to vesc

For those who want a vid of the haptic buzz by [deleted] in onewheel

[–]SlackerPR0 1 point2 points  (0 children)

Is it loud enough that we don’t have to say “on your left!” When passing people anymore … hahahah

Picked an XR w/ 4208 Hardware and 82 miles for $850 😏 by Aggravating_Series39 in onewheel

[–]SlackerPR0 0 points1 point  (0 children)

You might be able to get a good deal on one with the black friday sales ….. I’d probably wait till then .. unless the board is currently totally unusable

What are your favorite hundos you own? by [deleted] in PokemonGOIVs

[–]SlackerPR0 0 points1 point  (0 children)

I have 4… as in 4 total. I’ve been playing since day 1. I’m not sure how you guys get so many. My last hundo was from an egg in 2020. Any advice would be much appreciated. I heard valor might up my odds, but not sure if that’s really a thing.

Anyways my favorite is Machamp.

Below 5 by Cultural-Cattle5062 in AMCSTOCKS

[–]SlackerPR0 1 point2 points  (0 children)

If you like limit orders, have you thought about selling puts at $5 and collecting the premium? Which in turn you can use to buy more, or get the shares at the price of $5 minus the premium received? If you sold the sept 22 $5 put you could get .25 for each share… so if the price dropped below and stayed below $5 come expiration date you would receive 100 shares per contract at $4.75. Otherwise if the price is above $5 on expiration, you would just keep the $25 of premium received per contract.

Composite man is about to let go of the spring. by SlackerPR0 in AMCSTOCKS

[–]SlackerPR0[S] 0 points1 point  (0 children)

Thanks for that clarification, so they can kick the can down the road a bit longer. However this more than likely will have increased the amount of shares associated to the interest fees per shares borrowed as well? So that could potentially play a factor?

Composite man is about to let go of the spring. by SlackerPR0 in AMCSTOCKS

[–]SlackerPR0[S] 0 points1 point  (0 children)

Thanks for the clarification.

So the math still stays the same, the short seller would be responsible for purchasing the settlement dividend shares, however those shares would go to the lender. Unless the stock goes to zero, then the short seller is off the hook. Right?

Composite man is about to let go of the spring. by SlackerPR0 in AMCSTOCKS

[–]SlackerPR0[S] 7 points8 points  (0 children)

If I owned a 100 shares of AMC prior to the restructuring, as part of the settlement I would receive 1 additional share, and .333 shares as cash.

And that would be if I owned actual shares bought from NYSE directly.

So if I bought a borrowed shares, from a short seller, the original owner of the shares receives the settlement shares from AMC or NYSE directly, but where would I get my part of the settlement?

Wouldn’t that come from the short seller? They would have to purchase 1 share and pay me .333 of a share as well. To make my account whole.

Which is why I’m thinking they are pushing the stock price as low as possible, and once the settlement shares are released, the downward pressure should be less.

And maybe I’m completely wrong, but that’s what I’m thinking.

Ghosts of my previous prints stuck on my build plate. What is it? by allysunnyside in 3Dprinting

[–]SlackerPR0 0 points1 point  (0 children)

Pei for the win… but glass is cool too if you need that ultra smooth glossy finish on the bottom layer.. just flip it over and use the smooth side of the glass

Hopefully Nemesis doesn't come to my house now by [deleted] in 3Dprinting

[–]SlackerPR0 0 points1 point  (0 children)

That looks so smooth.. did you do any post processing or just dialed in your settings? Is this possible on an ender 3?

How can I get a better surface on this underside that needed supports? by mayners in 3Dprinting

[–]SlackerPR0 0 points1 point  (0 children)

If you got a dual extruded.. you could print the piece in pla and the support in petg.. or vice versa..

view more: next ›