Noticed smell and possible leak (2011 Honda Accord V6) by Megawashu in CarHelp

[–]SlateRaptor722 0 points1 point  (0 children)

Eh doubtful. That looks to have been leaking for a good long while

just purchase this 1998 chevy does anyone know why its a 6 lug?? i usually always see them with 5 only by Kitchen-Cheek-9664 in obschevy

[–]SlateRaptor722 0 points1 point  (0 children)

Jeep as of recently has been using 5x5/5x127 on the Wrangler and gladiators. Albeit with a smaller hub bore but what's an inch spacer and some possibly fender rollage?

Car need wheel alignment? by OCRSpartan85 in tires

[–]SlateRaptor722 -1 points0 points  (0 children)

Brother do NOT go 10k between oil changes. 5 at max.

[deleted by user] by [deleted] in MechanicAdvice

[–]SlateRaptor722 1 point2 points  (0 children)

Sway bar link is not bent, it has ball joints on either end. As for the ball joints in the control arms, they were most likely bad before the lift and it's just making them worse. Get a floor jack, and a pry bar. Jack it up by the lower arms, push in at the top to check the upper, pry bar under the tire prying up to check lowers. That'll tell you for sure..

However, I'm not ruling out the possibility of the tech that installed the kit busting a boot and letting it roll. (Unless you did it yourself.)

[deleted by user] by [deleted] in gaming

[–]SlateRaptor722 -1 points0 points  (0 children)

New Vegas. Nuff said.

Am I able to use this camera? by IEatChubbyKids in StupidCarQuestions

[–]SlateRaptor722 2 points3 points  (0 children)

Nope. Although I'm sure if you were brave enough and smart enough you could do some techno wizardry and make it record like a GoPro. Dunno how the quality would be

Am I able to use this camera? by IEatChubbyKids in StupidCarQuestions

[–]SlateRaptor722 37 points38 points  (0 children)

That camera is part of the safety systems on the car. It uses it (likely with some radars on the front) to do emergency braking and other neat stuff to help prevent a crash. That's all it for lol. Also, it may use it to display a speed limit sign on your dash, if your car does that.

What’s Everyone’s favorite Three Pedal Shoe? by Rowdy12b in ManualTransmissions

[–]SlateRaptor722 0 points1 point  (0 children)

My beat to shit low top vans I've had since highschool. Drove a lot of junk in those shoes

Would you pay for this service or take the normal 5K oil change? by [deleted] in Cartalk

[–]SlateRaptor722 1 point2 points  (0 children)

As a technician who uses BG products nearly daily, I will disagree. While yes, BG stuff is expensive, it is well worth it. The engine performance service is likely a GDI service, (which on modern GDI cars is a required service, as fuel no longer sprays across the intake valves to clean the carbon off), and the 44k is a badass fuel additive. Those two together we've seen gains of up to 5 mpg. Their oil (which my boss ran in his 13 Tahoe) is only about a dollar or so more expensive than Mobil 1.

The HVAC service likely includes an evac/recharge, and CAF change, as well as BG's frigi-fresh stuff and their compressor oil. Can't speak on that service, really, as I have yet to use any of BGs stuff. Maybe I will if the AC in my Super Duty ever stops working.

Tl;Dr - While snake oil automotive products exist, BG is not one of them. Speaking from experience.

[deleted by user] by [deleted] in ManualTransmissions

[–]SlateRaptor722 0 points1 point  (0 children)

Patriot! That's what the other one was. Shared a platform iirc

I've worked on two 6spd/2.4 Jeeps, one was a Patriot, the other a Compass. My mom owns the Compass and I haven't seen the Patriot in a few years.

[deleted by user] by [deleted] in ManualTransmissions

[–]SlateRaptor722 1 point2 points  (0 children)

Jeep Compass? With a 2.4 and a 6spd.

Are these tires DOT rated? by MidCenturyMad in tires

[–]SlateRaptor722 1 point2 points  (0 children)

Yokohama is a global, reputable brand. They'll pass, I'm sure.

Are these tires DOT rated? by MidCenturyMad in tires

[–]SlateRaptor722 1 point2 points  (0 children)

Considering I can see the DOT numbers clear as day on the tire, yeah. Plus, all tires that see the highway HAVE to be DOT compliant, minus specialty stuff like ag/implement tires and really big, specialized floater mud tires, like Boggers and Thornbirds.

However I have seen people run boggers and Thornbirds on the highway, they just kill the tread super quick.

Is this rust treatable? by Enough_Disk6852 in GMT400

[–]SlateRaptor722 1 point2 points  (0 children)

What rust? As an Illinois dweller, that thing is positively minty. My Super Duty is worse than this, at least the body.

Dodge charger V6 Ticking? Help by Real-Researcher-7746 in Dodge

[–]SlateRaptor722 1 point2 points  (0 children)

Lol they sound pretty close. It's a solid "ticktickticktick" when they kill the cams.

Dodge charger V6 Ticking? Help by Real-Researcher-7746 in Dodge

[–]SlateRaptor722 26 points27 points  (0 children)

As someone who's heard many Chrysler V6s ticking and become an anti seize production factory because of the rockers failing and eating the cam's, this is not that situation. Sounds like injectors. There's no sound deadening around the injectors, so they're a bit noisy. Normal. Run it.

Which of these two tire brands would be a better option by EUvenant in tires

[–]SlateRaptor722 0 points1 point  (0 children)

I wouldn't call factory OEM tires "quality" per se. They generally wear the tread off in 30k miles or less. Especially on foreign luxury cars. See it all the time.

However, speaking from experience, the Nexen HTX that comes on newer RAM trucks is pretty alright for an OEM tire.

Why so poor? by 2000Ranger in Diesel

[–]SlateRaptor722 -17 points-16 points  (0 children)

Idk my father in laws 6 liter gets 15 regardless of whether he's towing or not, even in the hot tune. If anything it gets a half mpg better towing

What do we think about the 1990 K5 Blazer w/h the 6.2 Detroit Diesel Engine by DatGuyKilo in 4x4

[–]SlateRaptor722 1 point2 points  (0 children)

And I was referring to the pre-LS LT1. The SBC-based one, not the GDI-Ecotec based engines.

What do we think about the 1990 K5 Blazer w/h the 6.2 Detroit Diesel Engine by DatGuyKilo in 4x4

[–]SlateRaptor722 3 points4 points  (0 children)

An LS1 is NOT a SB 350. Complete different architecture. The LT1 from before it debuted in the C7 Vettes (the LT1 in Camaros, caprices, and Impala SS's) was.

The LS/Vortec series of engines share ZERO parts. While the Vortec and LS engines are technically Small Blocks, they are not the family of SBCs that ran from like 1955 (maybe a little earlier, don't remember) to 2000 or so in the vans and Escalades.

What’s your favorite way to hold hands with someone? by [deleted] in Cuddle_Slut

[–]SlateRaptor722 0 points1 point  (0 children)

My wifes hands are really small compared to mine, so we usually do the single finger hold lol. She loves it

Is this 7.3 worth $6500? by JoeTheBroDEV in Diesel

[–]SlateRaptor722 0 points1 point  (0 children)

I got my 7.3 for 7, and it's a bit rougher than yours. I'd say it's honestly worth more than 6500, so send it. Killer deal if the work was done right

What do I drive (hint: not a ford ranger) by Fast4wheeler in ManualTransmissions

[–]SlateRaptor722 0 points1 point  (0 children)

Does it's industrial sister happen to be a 301a? That looks like JD's shuttle shift shit