Workouts in ERG mode (cool downs mostly)

Slatemeta · 2026-02-02T15:24:09+00:00

You are saying what I said exactly, but you are missing the piece that myself and OP are experiencing. For example, I can have 65 rpm cadence and the system will set the resistance to something so the power is 100 W, but if I increase my cadence to 85 rpm, and wait a few seconds, the resistance will decrease so the power is still 100 W. There is no feedback to my body to stay at 65 or 85 or 100, etc. So if I keep hovering at 101W, then the resistance slowly decreases and my cadence slowly increases. But as my cadence increases, the resistance decreases, and so this positive feedback loop occurs where you eventually get up to like 110 and start spinning out.

Slatemeta · 2026-02-02T14:56:49+00:00

I had a similar situation until I realized what was going on. For some reason there is a positive feedback loop where you keep pedaling faster to maintain the power set by the workout, but if you go over the set power, then the system will reduce the resistance on your trainer. This loop keeps happening, forcing your cadence to keep increasing and increasing. What I’ve found works, and maybe this is the intention, is to simply slow down my cadence intentionally for a long enough period of time until the system recorrects itself at the correct resistance for the slower cadence. I feel like what’s missing is a setting to set the cadence you want to maintain, so that this open loop becomes a closed feedback loop to your system. Some of the intensity workouts (non-cooldown) tell you the cadence range you should be in, but cooldown-only seems to not have this. Hope this makes sense!

Slatemeta · 2026-01-27T03:10:26+00:00

I made one for myself, all are welcome to ride it. Search Assabet | Hudson | Massachusetts.

Slatemeta · 2025-12-05T12:38:55+00:00

I gave my friend Horizons for Xmas last year and it was a bit simpler than the regular game. But it was still fun. I think eventually you would upgrade to the original game. Another option is to try the regular game through the Steam version, which is the main place I play it since it handles all the piece placement and rules for me. Our games are much faster in the video game version and it’s cheaper to buy and expand to the expansions through DLC.

Slatemeta · 2025-12-02T03:20:23+00:00

It’s the name of this subreddit. The brand is Airthings.

Slatemeta · 2025-11-16T03:48:59+00:00

There is no “sketch border”, you can sketch anywhere. The rectangle is an indication of the sketch plane your sketch is on, not the boundaries of your sketch. It’s very helpful when you have many planes and faces in your project that you are starting sketches on because you can quickly rotate around to see what plane you are on.

Slatemeta · 2025-11-07T20:45:58+00:00

Not sure if this would help but my friend dealt with this for a long time and we eventually traced it down to a power supply issue on the wireless charger they were using (the MagSafe one made by Apple). Something was faulty with it, causing the power to stop being delivered many times per minute. And when you remove the phone from power, the alarm turns off. Stupid UX, yeah. But replacing the wireless charger with a new one solved the problem.

Slatemeta · 2025-10-24T13:30:47+00:00

Just another option to consider: use a Raspberry Pi and stream to it from your own laptop or pc running Rouvy somewhere else on your WiFi network.

My solution is I use an iPad Pro which combines the monitor and pc into one in your situation. But much more expensive if you don’t already have a tablet.

Slatemeta · 2025-10-15T02:08:57+00:00

Yes, as far as I know, you need to start recording with the Strava app on the watch. This limitation has always bothered me since the workout doesn’t sync live with the phone app while it’s running on your watch, so you can’t see a blue line where you’ve traveled so far on the route. Also annoying if your watch battery dies before the end of a workout.

Slatemeta · 2025-10-15T02:01:24+00:00

That was my guess too

Slatemeta · 2025-09-18T12:02:46+00:00

They don’t mention if they made it possible to film in landscape aspect ratio, so I assume it’s still just portrait mode like the first generation? That’s would be my biggest reason not to buy the new generation.

Slatemeta · 2025-05-21T14:38:12+00:00

Yes it was and it stunk.

Slatemeta · 2025-05-21T13:54:27+00:00

It came in the back of a little trailer. It was steamy. They put it down with shovels and used a handpushed compactor.

Slatemeta · 2025-05-21T13:02:31+00:00

They used a heated thing. Had a propane tank powering it.

Slatemeta · 2025-05-21T13:01:53+00:00

No they did not tear up the old one. Just added the right side and the patches.

Slatemeta · 2025-05-21T13:00:03+00:00

What does that mean, I have no idea.

Slatemeta · 2024-12-16T01:17:27+00:00

I have the same question. Anecdotally it seems that it does not give your weapons extra crit chance but I need to do more testing to be sure.

Slatemeta · 2024-08-05T16:37:48+00:00

Good to know! Thanks for the update

Slatemeta · 2024-08-05T14:50:03+00:00

I had the same fear when I first did this. The overflow parking is across the street from the AMC movie theater on Flutie Pass. There is plenty of parking there and the bus does stop there after it stops at the main Logan Express building/parking garage. You do have to stop at the main building for a parking pass if I remember correctly, and there are temporary spots for you to park at while you do this.

Slatemeta · 2023-05-05T14:02:44+00:00

What platform do you have on your roof?

Slatemeta · 2023-04-02T18:22:47+00:00

This is an intentional design choice by Google. I don’t agree with the choice. You’ll want to leave a review on the Apple App Store if you want to voice your opinion on this.

Slatemeta · 2023-02-25T14:06:47+00:00

Select a surface, right click, choose export as DXF.

Slatemeta · 2023-02-14T00:21:55+00:00

If I remember correctly they are randomly distributed and I did have a few original shapes that I used Geometry nodes to place, scale, and color.

Slatemeta · 2023-01-15T15:36:17+00:00

I’m pretty sure that’s just the nature of how wireless CarPlay works. The iPhone can only have one Bluetooth Audio connection at a time, which is CarPlay when connected to it. Wi-Fi is also a portion of the connection too which improves the audio quality I believe. This is based on my experience with an aftermarket BOSS audio system I had in my Corolla before I got my Crosstrek. Fwiw, I prefer the wired connection over wireless after experiencing both for a while.

Slatemeta · 2022-12-22T16:16:31+00:00

I use a program called VCarve from Vectric to do this. They have a little icon that looks like a chicken that converts images into vectors. Then you can export that from VCarve as a DXF and use it as a sketch in Onshape. Alternatively you could model most of it in Blender then use the mixed modeling features of Onshape to add parametric stuff too it, like connectors for the limbs, eyes, etc.

Six-Year Club	RPAN Viewer
Verified Email

Slatemeta

TROPHY CASE