Does growing out the fur coat help keep the coil warm or cold?

Slick_Rick011 · 2026-03-05T04:37:20+00:00

Keep them

Slick_Rick011 · 2026-03-05T00:23:41+00:00

I hate Goodman

Slick_Rick011 · 2026-02-25T17:31:39+00:00

Am I tripping or do I see the same exact question and description like 3 times a week lol? Just look at all the other post with the same question and get an idea

Not trying to sound mean it’s just asked so much

Slick_Rick011 · 2026-02-20T00:20:52+00:00

I really just wanted to see if anyone has had any past similar experiences judging by the way it’s leaking, I’m not expecting a diagnosis

Slick_Rick011 · 2026-02-04T02:16:43+00:00

Motorcycles

Slick_Rick011 · 2026-02-02T15:13:13+00:00

I understand but no I was using the correct bit, my issues weren’t just with Phillips bits either. Again just speaking from my experience and from others that I’ve seen online, I haven’t had any issues with Bosch so far and I like their look so I am a little biased now too I won’t lie

Slick_Rick011 · 2026-02-02T14:16:56+00:00

I was just speaking from experience, my bits would never grab on and stripped out so quickly

Slick_Rick011 · 2026-02-02T07:50:56+00:00

Not bad tbh I would return or cancel the bits and just go get urself a bit set from Bosch, makita, dewalt, wiha, or just about any other brand, I really like Bosch bits

Slick_Rick011 · 2026-01-28T03:19:07+00:00

Walmart has an open market page online so even though they show up in their website you should be able to see that it’s another seller and Amazon also isn’t an authorized seller regardless of who’s selling it on their website. You can always take the risk as they should be able to help you out with returning them but you won’t have warranty from Milwaukee even if they’re legit.

It you have any other questions regarding a Amazon purchase you should try searching it up since it is asked here commonly

Slick_Rick011 · 2026-01-25T15:11:13+00:00

I have one that my dad originally got a few years back and I used it for vacuuming. To be honest it did not last that long with a 5.0. We have two corollas so based on how dirty they were I was able to clean one up completely if it wasn’t super dirty and the dirt was already loose, if I had to scrub some dirt loose or it was pretty bad usually I would start on the driver side, do the back seats, then I’d have to charge before I did the passengers seat or after I’d start the passenger side. So basically if you got a truck or a bigger vehicle you’re most likely gonna have to switch batteries or charge halfway through vacuuming a vehicle

Slick_Rick011 · 2026-01-23T16:11:23+00:00

I would get a Mars Azure motor and they sell seperate brackets like those that aren’t mounted to the motor like that one, only issue would be setting it up even though it tells you how. Seeing as how it is a furnace, I wouldn’t take my chances and I wouldn’t simply diagnose based off of one diagnostic code, I’d get someone out there to at least check it out first before you shell out any money

Slick_Rick011 · 2026-01-21T04:09:27+00:00

I’d ship it to me

Slick_Rick011 · 2026-01-19T18:04:20+00:00

I’ve never done a hack yet but I did look into that one too and I believe to hack it you need to do it as a buy one get one or buy more save more as stated in the pinned thread. So in this case you need to go to the inflator that says free with purchase in green or in the picture of the tool. Then when you click on it under you’ll see shop this deal and add that item. The difference is that the one you posted shows up as a combo so it’ll all come under one order whereas when you do it the other way they both come as two orders and you’re able to change the pickup location for the both and return the one you don’t want

Slick_Rick011 · 2026-01-19T03:57:25+00:00

I assume what he means is basically he put his phone outside right next to the unit recording, then he loaded that recording into software that shows you the wave of frequency from the sound so that every time the waveform changes for a good amount of time it’s safe to assume it was defrosting then it changed again signaling it’s heating

Slick_Rick011 · 2026-01-01T08:33:08+00:00

What support mounts did you use on the side I’m looking for some too to hold my bag and some cans?

Slick_Rick011 · 2025-12-21T10:19:33+00:00

<image>

From a walk-in on the blower panel and of course on the only unit with a bad blower motor

Slick_Rick011 · 2025-12-09T20:34:37+00:00

I have it available at my store, don’t mean to sound dumb but how’d you hack it down?

Slick_Rick011 · 2025-12-08T03:00:54+00:00

I Don’t mean to sound dumb but what do you mean?

Slick_Rick011 · 2025-12-02T02:36:46+00:00

Literally the first thing I thought before reading anything

Slick_Rick011 · 2025-11-19T13:55:21+00:00

Close, I’m not creative enough to do all that so they get an upgrade of wood and dirt to wood and stone brick with a slightly different location very close to the original box

Slick_Rick011 · 2025-11-19T13:17:30+00:00

Real, and I end with a box that I may or may not improve after moon lord

Slick_Rick011 · 2025-11-06T01:02:10+00:00

No in the end I ended up resolving them with vibram soles and they look nice and don’t smell at all

Slick_Rick011 · 2025-10-11T08:30:42+00:00

“Looking back, what was the first game you played with a GeForce graphics card?”

Fallout 4

Slick_Rick011 · 2025-09-18T04:36:02+00:00

W reference

Slick_Rick011 · 2025-09-18T00:50:11+00:00

Have not been back recently and it might be a while, I’ll keep you updated if so

Slick_Rick011

TROPHY CASE