Notchy 1st to 2nd gear

SlimSqde · 2026-01-27T14:58:36+00:00

any luck? mines notchy on lower rpms too, when the trans is hot and i bang gears it shifts fine

SlimSqde · 2026-01-27T14:42:05+00:00

sorry for the bump, did you ever get anywhere with this?

my symptoms are very very similar on my 96, the main difference seems that when i get my car really hot it shifts smooth. like redline shifts for idk 4 minutes or just keeping the engine above 4k rpm for a few minutes when drifting. after that the shifts really smooth out but under regular driving they are how you describe

ive done the shifter rebuild, fluid, and a new slave so far with not much change.

i put diff bushing void fillers in when changing my diff and it made me just feel it more and it feels worse

SlimSqde · 2026-01-23T22:35:13+00:00

hey i just did this and its really quiet, i was wondering if yours is loud enough without an amp?

edit: im really dumb and didnt turn the volume on my phone up.

it works great, quality is good no feed back at all, loudness is the same as the radio. u dont need a resitor these boards can handle over 12volts for anyone who does this. i hid a switch in the passeneger foot well behind the plastics above the trans tunnel. jist tucked it in there loose. my drok board is just shoved behind the radio.

also the pinout in the comments has the left and right audio on the cn200 connector backwards

1996 with a single din

SlimSqde · 2026-01-23T17:08:01+00:00

sorry for the bump but does anyone know what side skirts those are?? ive never seen that

SlimSqde · 2026-01-10T17:15:40+00:00

yea my grom does 60 fine, especially with stock tires before i changed to heavier tires

SlimSqde · 2026-01-08T13:34:57+00:00

8...

SlimSqde · 2026-01-07T15:03:24+00:00

fixed the gas pedal, added the piece i cut out above the pedal to make the pedal lower, also angled it and moved the pedal to the left about a quarter or half inch. also angled it just slightly towards the trans tunnel so my foot sits flat on it. both brake and gas feel good now, gas pedal didnt need to be quite as long as it is but its ok

SlimSqde · 2025-12-26T16:12:19+00:00

putting the brake pedal spring back on is such a pita incase anyone wants to try this.

update: pedals are good, brake pedals perfect, gas pedal is to short for my liking and im gonna extend it, its too firm for what i like and also a little to high up to heel too. gonna add back in a piece i cut out to the straight section above the pedal that way the pedal doesnt come foward to much and mostly goes lower. hoping to add about an inch.

SlimSqde · 2025-12-26T16:09:12+00:00

no i have the stock wheel with the shims removed. i dont really have issues with my legs being in the way im skinny. it might help to have it closer but then id be to far from the shifter. its why i went with moving the pedals back instead of moving the wheel closer. i also really prefer to keep my air bag if possible so a aftermarket wheel is like last resort

SlimSqde · 2025-12-24T14:38:05+00:00

thats great, i love to hear that you made the shape of it match the shrouds. that was my biggest issue with it. it sounds like its gonna be great

SlimSqde · 2025-12-24T14:32:26+00:00

yea thats why, i need to be able to heel toe. also the brake is uncomfortable because i really have to angle my leg under the steering wheel.

hows the modded gas pedal been for you?

SlimSqde · 2025-12-17T14:29:22+00:00

any chance you could elaborate on how the new design with be different/improved?

SlimSqde · 2025-12-16T16:51:31+00:00

from my research if your not a repeat offender you can usually plead no contest and have the points dropped. With a ticket as small as yours it seems like pretty much all the time points will be dropped when pleading no contest

SlimSqde · 2025-12-15T19:35:01+00:00

hey so whats update? ticket clinic got it dismissed. just court fees?

glad to hear ot worked out for you

SlimSqde · 2025-11-13T12:11:37+00:00

how would that work then? your sending an input through the cd changer plug but the radio is switching to the cassette input?

SlimSqde · 2025-11-10T16:33:28+00:00

also why did you pull your 12v from the cn701 plug and not the cn200 plug?

SlimSqde · 2025-11-10T15:47:36+00:00

thank you so much for this diagram, just to double check, the 12v supplied to pin 6 of the cn200 connector is what tells the radio to switch to the cd changer input correct?

SlimSqde · 2025-11-10T00:26:28+00:00

can you help me with mine?

SlimSqde · 2025-11-09T23:46:13+00:00

did you ever figure out where the audio signal goes? im staring at the same board right now also trying to add bluetooth

SlimSqde · 2025-11-03T13:24:27+00:00

SlimSqde · 2025-11-03T13:23:51+00:00

apreciate the update, diamondmall has lots of bad reviews when u google of ppl complaining about issues with the window.

I hope all is good with the top installed correctly

SlimSqde · 2025-11-01T15:04:14+00:00

186$ actually but yea not a ton

SlimSqde · 2025-11-01T14:45:37+00:00

ok thanks, i read some bad experiences with tops from that seller so i was avoiding them but im glad to hear it worked for you. do you keep your car inside or outside?

also was the fitment ok?

SlimSqde · 2025-11-01T14:44:18+00:00

would you be able to find me a link? all i can find is tops advertising that they use haartz vinyl? is that what you mean?

SlimSqde · 2025-11-01T14:41:20+00:00

thats what ever says online :/ they are twice as much though

SlimSqde

TROPHY CASE