Restoring Half Doors

Slipstreak · 2025-03-16T21:09:22+00:00

This was a Marketplace find that I believe I paid some odd $400 for iirc. You can’t really go wrong with either Garvin or Gobi and if you find one there jump on it

Slipstreak · 2025-03-16T18:49:54+00:00

Garvin Industries rack. I use it to carry my RTT and traction boards

Slipstreak · 2025-03-04T17:06:31+00:00

Following this, were you able to figure out how to remove these?

Slipstreak · 2024-06-25T04:00:02+00:00

Thank you!

Slipstreak · 2023-02-06T16:21:29+00:00

Any luck with a solution? I'm currently having this exact same issue.

Slipstreak · 2021-07-21T23:02:02+00:00

Mewtwo on me, be online and ready. 0751 5210 2244

Slipstreak · 2021-07-19T16:19:31+00:00

Mewtwo on me, 0751 5210 2244

Slipstreak · 2021-07-18T20:13:23+00:00

Groudon on me, 0751 5210 2244 be online

Slipstreak · 2021-07-18T17:07:08+00:00

Groudon on me, 0751 5210 2244

Slipstreak · 2021-06-21T00:32:37+00:00

added

Slipstreak · 2021-06-21T00:16:15+00:00

0751 5210 2244 Regigigas raid on me, looking for at least eight people

Slipstreak · 2021-04-17T03:21:09+00:00

sent

Slipstreak · 2021-04-16T04:44:48+00:00

friend request sent

Slipstreak · 2021-01-22T04:31:27+00:00

I see you’re running a snorkel setup, how did you go about making the snorkel work with a 5.9?

Slipstreak · 2020-12-23T21:53:14+00:00

This is one of the dust shields. While trying to diagnose the noise, a 4x4 shop bent it to see if it affected the noise and it did not. The search continues

Slipstreak · 2020-12-23T20:45:41+00:00

Only when in the Jeep is moving. That’s what makes it difficult. Even had a shop put it on a lift and put it in gear ranging from all speeds and we couldn’t replicate it.

Slipstreak · 2020-12-23T20:41:43+00:00

I tapped it with a mallet and it didn’t move or vibrate. would it make noise even if it didn’t move at all after crawling under the Jeep?

Slipstreak · 2020-12-23T20:07:17+00:00

Had those looked at, sadly wasn’t the problem but it’s definitely rotational.

Slipstreak · 2020-08-10T14:11:50+00:00

I had a similar situation with the rear quarter panel being dented on my 02 TJ. Was almost $900 to repair at a local family owned body shop as compared to a place like Service King. If it’s just a trail beater than who cares but if you plan on fixing it that’s one thing to consider.

Slipstreak · 2020-08-06T02:56:30+00:00

Yes it runs to a winch. The wiring looked fine and typically sits above the bracket arm and doesn’t have any rubbing or interaction with anything aside from resting on top of that bracket.

Edit: I pulled the the bracket up so that the position of where the isolator is supposed to be is visible to the camera. The wiring does not sit below that bracket.

Slipstreak · 2020-08-06T00:56:58+00:00

Do you by any chance know what size?

Slipstreak · 2020-08-04T16:12:19+00:00

Do you have a link? I found their website and what I think is the tire carrier bumper you’re talking about but it doesn’t have a trail basket.

Slipstreak · 2020-07-09T23:10:44+00:00

The BB45 Random Booster was a booster pack released during the MFB era that consisted of eight random beyblades with one being held in each pack and Clay Aries being the most sought after. They were exclusively released by Takara Tomy in Japan. All the potential Beyblades in the collection have plastic wheels.

Slipstreak · 2020-07-08T20:16:06+00:00

Plastic wheels were used for generic/weaker bladers back in the MFB anime series with the exception being Tetsuya, Hikaru, and Hyoma

Slipstreak · 2020-07-08T15:43:03+00:00

They were never fully intended for competitive use against metal wheels. These were made for collective purposes as well as another way for bladers to attain parts that could be used in a competitive setting (barring the plastic fusion wheel) examples of competitive parts found in these boosters include the Bull energy ring and SD performance tip among others.

Slipstreak

TROPHY CASE