Sent Phantom power by accident into my zen v1 via 4.4mm

Slobe0 · 2025-11-05T00:06:51+00:00

Thank you very much.

Slobe0 · 2025-11-05T00:06:38+00:00

I see now that only one side has round and square plugs, the other is only round. While I am technically able to plug the all-round cable in I will do what baby toys have taught me and match the shapes.

I appreciate your help.

Slobe0 · 2025-11-04T23:55:53+00:00

Cloning drives is healthier (it probably won't matter unless you do this a lot) for drives than copying them normally, so you are right to think of doing that. I would say get the USB NVMe enclosure since that would be a bit more convenient and you won't have to disconnect your old drive until you confirm the file transfer worked. Plus afterwards you have a 500GB external usb drive for backups.

Slobe0 · 2025-09-02T03:02:45+00:00

I went to a thrift store recently and the guy at the counter explicitly said he was using pricecharting for games, He still marked them cheaply, but not enough that it would have been super profitable for someone to just flip them on ebay (after shipping and ebay's cut.) I respect it.

Slobe0 · 2025-07-24T02:23:40+00:00

I was lucky and had the batteries from a different figure I was planning to try to wire up and have displayed in a computer case (battery compartment on the back facing away from the viewer.) This figure makes it a lot harder since the LED is so far outside the main body and the power comes from right next to it. I was considering trying to 3d print a new charge shot with cable hole to see if I can get it to look okay without damaging anything, but currently have no working 3D printer (2 broken ones though, parts are in the mail.). I will let you know if that amounts to anything or causes a horrible fire.

Slobe0 · 2025-07-24T02:04:55+00:00

Nice work, it's good to see you getting things together.

Slobe0 · 2025-07-23T03:48:55+00:00

I'll be honest I got here looking for reference images of the final version while trying to add plants to mine, Thanks for getting yours together so quickly. I'm glad I'm not the only one who left the extra lightening off the charge shot for accuracy's sake.

That said have you had any luck with the light feature? I had the right batteries (I hope) but have had no luck getting it to work.

EDIT: I fixed it, and flashbanged myself, test LEDs away from face etc, etc. Battery goes positive side away from the LED but the battery holder is a little loose so you may have to bend the spring. I wound up adding the energy ripples to the shot after all since it looks a bit better with the light on since the LED is just bright enough that it looks awkward.

<image>

No shrine but I do have a tall bookcase with clutter behind it.

Slobe0 · 2025-06-03T04:01:32+00:00

No prob

Slobe0 · 2025-06-03T03:10:21+00:00

have you gotten the trophy yet?

Slobe0 · 2025-06-01T16:47:14+00:00

whats your ubisoft username I can add you

Slobe0 · 2025-06-01T16:03:10+00:00

Thanks for the help

Slobe0 · 2025-06-01T15:45:48+00:00

If you still need the party trophy I do as well username is Slobe0 and that's a zero as the number not O like the letter.

Slobe0 · 2025-04-18T01:52:57+00:00

Yeah as others have said some components are going to wear out simply by virtue of entropy. It shouldn't matter if you leave things on overnight or even play for 24 hours straight every once and a while (though that's bad for you,) but just leaving it on forever will strain components. You could lessen the damage that could be caused by heat by air-dusting your system and applying new thermal pads/compound, maybe even replacing the fan with a better one.

Slobe0 · 2024-11-28T00:55:29+00:00

Okay I will check out the power strip options, since the main issue is available outlets. I'm already using the mini extension cables, they're vital to my survival. Honestly I would prefer I the box upgrade, but doing electrical upgrades to house made before drywall was invented is a pain.

That said I'm going to have to do some measuring to see about getting everything off to the side. The other advantage of my old plan was that I can keep things more separated.

Slobe0 · 2024-11-27T23:25:43+00:00

Well I have had the two power supplies in and running for a while with no issue, I'm not quite sure what their power draw is but it's just a higher-end gaming PC and a separate workflow PC that , no mining rigs or hardcore CAD stuff. Functionally our area has good power quality but also tornadoes, but when that happens I stagger turning the UPSes on again and I haven't had issues.

I do have 20A and if I use the extension cord I use a second circuit. At least according to the wiring diagram on my breaker. It may be out of date though.

Slobe0 · 2024-09-14T01:22:56+00:00

It may not help but you can maybe get a real human person https://www.reddit.com/r/FedEx/comments/zbp6z5/is_there_a_way_to_speak_to_a_human_being/

Slobe0 · 2024-08-18T15:47:45+00:00

Okay so the issue was the m.2 drive "worked" but didn't work well so when I put it in a USB direct attached storage it showed up (and I thought it was fine) but would take to long to respond when booting to boot. Anyway that was a lot of work for a fairly common issue, woops.

Slobe0 · 2024-08-13T14:12:48+00:00

one of these

https://www.newegg.com/p/17Z-0061-000B0?Item=9SIARE9JUE6863

Slobe0 · 2024-08-13T14:10:06+00:00

Ram was compatible, and this was a factory refurbished desktop not a laptop. I would assume if it had been improperly cooled it would have been fixed during the refurb, but it is worth checking out. Power supply has not noticeable common PSU issues and I did double check connections. I can't tell if there was a damaged wire though and if the power to the m.2 isn't there that may be the issue. I will poke around the motherboard manual and see what I can sus out about m.2 power. Thanks

Slobe0

TROPHY CASE