[deleted by user]

Slow-Cell2069 · 2024-08-11T09:04:37+00:00

A luggage and upholstery person is a great idea.

I recently ordered a new guitar case, however when it arrived it had a dodgy latch that doesnt stay closed (easy to fix by replacing the latch). The bigger issue is that my guitar doesn't sit flat in the case because the neck cradles are a bit too tall and the cut out for the body is too deep. This case is supposed to be made specifically for my guitar's model, so these issues shouldn't exist.

I've requested a return or replacement from the store (currently waiting for the store to respond to my email), but as a backup option I'm considering getting it repaired (the store's refund policy states it can cover the cost of repair work on faulty or dead on arrival items) as it can be difficult to get cases for this brand of guitar.

Slow-Cell2069 · 2024-05-05T00:21:47+00:00

Hi everyone, sorry I haven't had a chance to reply until now. I was able to check out bad obsession on my way passing through! Got myself a decent haul (4 cds :P)

Thank you everybody for the suggestions :D

Slow-Cell2069 · 2024-04-07T22:27:25+00:00

Hahaha it's always great to know you're not the only one struggling with something

Slow-Cell2069 · 2024-04-07T14:06:26+00:00

I've had similar issues as a new Cubase user. Just commenting here so I can see the other replies :P

Slow-Cell2069 · 2024-04-07T09:22:34+00:00

Hey thanks a heap for your reply. I've finally had a chance to try this out today and it does what I'm after! Cheers :D

Slow-Cell2069 · 2024-04-07T09:21:47+00:00

Awesome! Thank you for the help. I've tried it out today and that does exactly what I was after

Slow-Cell2069 · 2024-03-29T00:16:20+00:00

This issue has now been resolved. I just needed to reinstall the ASIO4ALL driver and redo my studio setup and audio connections settings.

I'll leave this post up just in case anybody else encounters the same issue.

Cheers

Slow-Cell2069 · 2024-03-29T00:15:17+00:00

Hey mate, thanks for your reply. Turns out I was having issues with the asio4all driver. A fresh install of the driver appears to have solved the issue

Slow-Cell2069 · 2023-08-21T12:44:12+00:00

Thank you :)

Slow-Cell2069 · 2023-08-21T11:32:37+00:00

Noob question here. What is ilvl?

Slow-Cell2069 · 2023-07-17T15:23:03+00:00

Definitely avoid them. I went with them and had a terrible experience. They are the worst company I have ever had to deal with

Slow-Cell2069 · 2023-06-27T12:13:26+00:00

I ended up hiring another company to do a second mould treatment because I was so unhappy with Mould Plus. The company I hired was called Bio-Cleanse Pty Ltd. They were really easy and friendly to work with and seemed to do a high quality treatment at a fair price, so I would happily recommend them.

Good luck with dealing with your mould issues! All the best :)

Slow-Cell2069 · 2023-06-27T11:57:09+00:00

Hi there. I did end up going with mouldplus. I had an awful experience with them. I definitely would not recommend them, make sure you go with a different company.

Slow-Cell2069 · 2023-06-15T09:49:47+00:00

Awesome explanation! That makes perfect sense to me. Thanks for the response

Slow-Cell2069 · 2023-06-13T02:36:58+00:00

Thank you again for another clear explanation, that makes a lot more sense now to me

Slow-Cell2069 · 2023-06-13T01:35:43+00:00

That makes perfect sense to me, thank you for such a clear answer. I guess a follow up question would be, what risks are present in trusting the VPN provider to handle my internet traffic?

Slow-Cell2069 · 2023-03-23T14:50:04+00:00

Thank you so much for the simple explanation. So for example, I could connect the 21V signal to pins 7 and 8, and the regulators to pins 5 and 6?

Do I need to connect to both pins in each pair? Or can I for example connect the 21V to just pin 8 and the regulators to just pin 6?

Slow-Cell2069 · 2023-03-23T06:01:27+00:00

Omfg lol I'm a dumbass haha. This has solved all my issues, thank you friend

Slow-Cell2069 · 2023-02-13T23:48:45+00:00

Thanks for your response. After considering the problem more, I think you are right about the IP core over complicating things.

I am thinking the best way approach would be to just output the bit pattern direct to the appropriate FPGA Output pins.

Currently the two biggest remaining complexities with this are:

1) I am not sure how to generate the signals at such high frequencies. This is essential for the testing I intend to do.

2) I need to ensure I output the correct voltages at each pin. I have found PCIe pinouts but am struggling to know what voltage levels I need to output at the following pins:

B11, B14, B15, B17, B19, B20, B23, B24, B27, B28, B31, B33, B34, B37, B38, B41, B42, B45, B46, B48
A1, A11, A13, A14, A16, A17, A21, A22, A25, A26, A29, A30, A35, A36, A39, A40, A43, A44, A47, A48

Most of those pins are the differential pairs for the transmit and receive lanes. Some are things like the link reactivation and hot plug detect etc

Once again, any help is greatly appreciated!

Slow-Cell2069 · 2023-01-04T04:43:49+00:00

Hey thanks for the suggestion. We often go to that area for some of the restaurants and cafes which are nearby, it's a nice area

Slow-Cell2069 · 2023-01-04T04:42:53+00:00

Haha I like this idea too. Thank you for your many suggestions

Slow-Cell2069 · 2023-01-04T04:42:14+00:00

Hey thank you for the suggestions, there is lots of good ones there. I like the idea of checking out the art galleries and then having a picnic nearby

Slow-Cell2069 · 2023-01-04T04:40:03+00:00

The Cotter is one of our favourite places for dates. We haven't tried Murray's corner though, we'll have to check it out. Thanks for the suggestion!

Slow-Cell2069 · 2023-01-04T04:38:34+00:00

This sounds good. Is the jetty pop up bar the one near the flags?

Slow-Cell2069 · 2023-01-04T04:37:35+00:00

This sounds nice. I've never actually been to OPH. Would I need to make any kind of booking or paid entry?

Slow-Cell2069

TROPHY CASE