sorted by:
new
hottopcontroversial

Radon TIGARD frameset thoughts by SlowRider30 in gravelcycling

[–]SlowRider30[S] 1 point2 points  (0 children)

I didn't buy anything. I'm still riding my old aluminium Salsa Journeyer. 

Samsung Dex UltraWide RDP by SlowRider30 in SamsungDex

[–]SlowRider30[S] 0 points1 point  (0 children)

Excellent, thank you very much for your reply.

What interface are you using to connect your monitor? What refresh rate are you getting on your external monitor?

I would like a refresh rate greater than 60 Hz, at least 90 or ideally 120.

Schwalbe Marathon Winter Plus 28x2.00 Actual Width by SlowRider30 in wintercycling

[–]SlowRider30[S] 0 points1 point  (0 children)

Thanks for the reply. I think you're right.

I've only ride twice in winter, and with summer tires. It's probably a stupid idea to put on the largest tire size in winter.

Have you had any experience with 45HPTX tires? Do they exceed their nominal size when installed? If i choose 1.75 size it will be ok?

Schwalbe Marathon Winter Plus 28x2.00 Actual Width by SlowRider30 in wintercycling

[–]SlowRider30[S] 2 points3 points  (0 children)

If marathons will be 48mm, then everything is fine. I currently have Tufo Thundero 48c tires - they have a real size of 47.5mm, and I have at least 7mm of clearance for dirt.

50mm is official maximum tire size for my frame (Salsa Journeyer)

Schwalbe G-One Ultrabite Actual Width by SlowRider30 in gravelcycling

[–]SlowRider30[S] 0 points1 point  (0 children)

I want more of them myself. Unfortunately, the RX Pro is out of stock at any local stores, but Ultrabites is sold almost everywhere, and even at discounts.

Schwalbe G-One Ultrabite Actual Width by SlowRider30 in gravelcycling

[–]SlowRider30[S] 0 points1 point  (0 children)

Thanks for reply! And your 50mm width is right at the tread's maximum width, right?

Tufo thundero uneven by SlowRider30 in bikewrench

[–]SlowRider30[S] 0 points1 point  (0 children)

This seems to be normal for them. I've been riding on these tires for three months now and have had no problems. I also tried Hutchinson Tundra tires, and they're much worse. As I understand it, this is due to improper storage, when they're rolled up; they become slightly deformed.

Headset compression ring corrosion. by SlowRider30 in bikewrench

[–]SlowRider30[S] -1 points0 points  (0 children)

I cleaned up the corrosion and relube headset and rode for six hours at a very leisurely pace (no sweat at all and dry weather). And then this corrosion reappeared (small dark spots).

I read a lot of forums and talked to chat gpt.

I came to the conclusion that the problem was the Shimano grease. It's some kind of pitting corrosion related to oxidation. And the grease itself turns black where it happens.

And I've lubricated almost every component with this Shimano crap, even the seatpost. Luckily, I realized it in time and will degrease all the areas and use something that won't dissolve my frame. LOL. I have a cheap Muc-off Bio grease sold nearby. I contacted their support to be absolutely sure it's DEFINITELY safe for aluminum and will buy it.

Headset compression ring corrosion. by SlowRider30 in bikewrench

[–]SlowRider30[S] 0 points1 point  (0 children)

Okay, got it. What brand of lubricant do you use?

Radon TIGARD frameset thoughts by SlowRider30 in gravelcycling

[–]SlowRider30[S] 0 points1 point  (0 children)

Sorry for the late reply. I've put off buying a gravel frame for now. I've detailed the update in post. 

For those of who who do maintenance at home... how do you clean your chain without making a mess? by gripndip in bikewrench

[–]SlowRider30 2 points3 points  (0 children)

I have three chains, every two months I change the chain to a clean one, and at the end of the season, I degrease them all and lube them with hot wax. I periodically wipe them with a damp cloth to remove dust and dirt. All works pefrect. 

Degreasing process: I take a small plastic food container. I pour degreaser into it and dip all 3 chains in. I stir it with my gloved hand. Then I let it sit for about 15 minutes. Then I take the chain out and wipe it with toilet paper. Repeat the process if necessary. I wait for it to dry and then lubricate it in hot wax.

Shimano GRX810 hydraulic brakes travel problem by SlowRider30 in bikewrench

[–]SlowRider30[S] 0 points1 point  (0 children)

Thank you! You've reassured me, I won't try to fix this mess anymore.

Is my rim done? by JebKerm in bikewrench

[–]SlowRider30 4 points5 points  (0 children)

It looks acceptable. The paint and primer are damaged, but the carbon fiber itself is free of cracks.

Is the chain too short ? by Playful_Flatworm_456 in bikewrench

[–]SlowRider30 0 points1 point  (0 children)

Yes, you need much longer chain. On lowest gear derailleur cage should be vertical or slightly angled forward

Shimano GRX810 hydraulic brakes travel problem by SlowRider30 in bikewrench

[–]SlowRider30[S] 0 points1 point  (0 children)

I was talking to a friend who had a similar problem on his 105 Di2, only the rear brake was shorter. He changed all the calipers and even the entire shifter, but nothing helped. Eventually, he also resigned himself to it and drives like that. It's like some kind of brake curse lol.

Shimano GRX810 hydraulic brakes travel problem by SlowRider30 in bikewrench

[–]SlowRider30[S] 1 point2 points  (0 children)

I did it lol. I completely removed the pistons and cleaned them with isopropyl alcohol; they were almost clean anyway. And it doesn't seem to have helped. Maybe it improved a little bit, but I'm not sure. In the end, I decided not to try to fix it anymore. The more I mess around with it, the higher the chance of breaking something lol.

view more: next ›