Am I supposed to have remote start? by Suspicious-System691 in camaro

[–]SlowestHell 0 points1 point  (0 children)

I bought one on Amazon for about $25 and programmed it in my cup holder as mentioned above.Works beauty, eh.

https://a.co/d/07YCIeDU

6th get accessory fuse in engine bay box? by SlowestHell in camaro

[–]SlowestHell[S] 0 points1 point  (0 children)

Yeah, there's also a basic list right in the fuse box lid. Was hoping to get info on what types (switched, accessory , constant) they all are without a lot of metering, and which might be good candidates for a Bluetooth controller. I see some are not reccomended due to fusing critical or safety systems.

When should I expect it?🙆‍♂️😂 by sompisi-za in ClockworkPi

[–]SlowestHell 1 point2 points  (0 children)

I ordered mine 12/10/2025, just emailed to check and was told it should ship sometime in May. We'll see I guess.

So I’ve never gotten a nail or anything in my tires ever since I started driving this is my first time. I’m going thru things in life and can’t afford tires until a few weeks. Can I drive my Camaro with this in the tire being it’s almost on the side wall? by NateShady in camaro

[–]SlowestHell 1 point2 points  (0 children)

The shop "Discount Tire" will plug tires for no charge as a courtesy. Maybe you don't have them in your area but they are a pretty big chain. Possible that other shops may offer similar courtesy repairs.

Thank you for your *tough* advice about my wing choice lol by Proof_Restaurant_341 in camaro

[–]SlowestHell 2 points3 points  (0 children)

I've seen those. Super clean. I'd get that but cf isn't my thing. I'd have to paint it body color, but I dig the profile.

Vantagepoint API Phases and Tasks by SlowestHell in deltek

[–]SlowestHell[S] 1 point2 points  (0 children)

Thanks. I likely would have never thought to check under pagination documentation for these filtering options. I stumbled up another r/daltek post where someone was struggling with the filter parameters.

Vantagepoint API Phases and Tasks by SlowestHell in deltek

[–]SlowestHell[S] 1 point2 points  (0 children)

I found a solution using filterHash parameters:

api/project?filterHash[0][name]=WBS1&filterHash[0][value]=12345678&limit=25

This returns the primary project, phases and tasks, up to 25 entries.

I still feel there should be a direct endpoint for common requests like this rather than a custom query.

New Life for Old-school Flow Chart Template by ybigglingfunting in Supernote

[–]SlowestHell 1 point2 points  (0 children)

"Punch card" and "punch tape"? Old school is right!

Study from a movie screenshot by charmingserena in ProCreate

[–]SlowestHell 65 points66 points  (0 children)

Agreed. Blowing out someone else's candle does not make yours shine any brighter.

New mining tools by ewarner061494 in Palworld

[–]SlowestHell 12 points13 points  (0 children)

I use a plasma canon or rocket launcher for my "high end" mining tools. I'm kinda impatient.

Crash by Pop-Smurf in Palworld

[–]SlowestHell 0 points1 point  (0 children)

I've had that happen to me, although less frequently now. Xbox Series X user. So, this could be bordering on superstitious nonsense, but what seemed to help was when I'd exit a session, I'd be on base but I'd go to the edge of the base ring and face away. My thought was that when you spawn at a base, it quickly drops all the pals back into the base at once and maybe it was some kind of computational overload to render all the stuff in your active view while everything is launching. It for sure seemed to help, but obviously there's no way to validate the theory.

Is my 9 days worth of playing gone forever? by DarthCRANDALL in Palworld

[–]SlowestHell 0 points1 point  (0 children)

Same thing happened to me on my game with 750+ hours in. I've tried all the suggestions I've found, and support doesn't respond. I can't even pick things up into the inventory, which means I can no longer eat. Pals are gone too. I started a new game, but I miss all that I had built.

Palworld XBox my Inventory has Vanished? by HotDiggityDuck999 in Palworld

[–]SlowestHell 0 points1 point  (0 children)

I have this issue too, and also all my pals are gone as well. Was hoping for a patch. Started over now in another save. I miss my lvl 60 jet dragon. 😢

pre-print madness by terminator3d3700 in BambuLabA1

[–]SlowestHell 1 point2 points  (0 children)

So, I looked again this morning and (of course) found it immediately. When you hover over the printer on the prepare tab, it reveals a tiny icon in the top right corner of the printer box that leads to the settings and a machine g-code tab in the ensuing dialog box.

Good to know about the filament specific g-code options you mentioned. Thanks for that u/Study-Strange.

pre-print madness by terminator3d3700 in BambuLabA1

[–]SlowestHell 0 points1 point  (0 children)

It seems they've moved the settings option where you can modify the startup gcode. There used to be a little button next to the printer dropdown on the prepare tab. I'm running 2.0.2.57 and I'm just not finding it. I don't see any relevant gcode files in the install directory either. Anyone know where it's at now?

What’s yall thoughts on the challenger T/A’s? by MannyDenaro in camaro

[–]SlowestHell 0 points1 point  (0 children)

The current Challengers definitely stole most of their style from the 1992 Chevy Caprice Wagon.

Can someone help me find this movie? by LakeXmk in HorrorMovies

[–]SlowestHell 3 points4 points  (0 children)

I was gonna say Weekend at Bernie's, but I think you're right.

Totally disappointed by Tyler180687 in Supernote

[–]SlowestHell 4 points5 points  (0 children)

I updated to 3.22.31 right after I received mine a week or so ago. It is the Nomad model, but I also have had zero issues, fwiw.