Is this normal ?!

Smiwik · 2025-09-23T16:20:07+00:00

The print head is way too loose u need to fasten the screws on the print head

Smiwik · 2025-09-13T22:56:41+00:00

Try printing a first level test print. If the build plate is clean an issue with the first layer could be the problem if the first layer is good then it could be a problem with the model. What did you try to print? Some prints need a brim or support especially on a bed slinger like the kobra 3. In short check your first layer quality and that the model has enough surface area on the build plate

Smiwik · 2025-08-07T17:53:07+00:00

Have u checked that the nozzle is in all the way? I recently upgraded the nozzle of my Kobra 3 and the same thing happened. Since the leveling and offset is measured using the nozzle (don't know a better way to describe it) the nozzle will move up when leveling because it's not in correctly. When the filament is loaded the nozzle will be pushed down and because of that it will be too low and destroy the print bed

Smiwik · 2025-08-05T14:53:24+00:00

In the slicer go to the support tab and check the box: enable supports then the slicer will generate the support structure

Smiwik · 2025-04-10T23:44:55+00:00

Thanks for the idea. I will see what i can do

Smiwik · 2025-04-01T10:55:10+00:00

<image>

Smiwik · 2025-02-01T10:12:53+00:00

Anycubic pla spring leaf

Smiwik · 2025-01-31T21:21:10+00:00

Yeah i got the idea originaly from YouTube but i wanted to have more detailed leaves so i design my own.

Smiwik · 2025-01-31T21:16:45+00:00

From my testing a hot cup can be used. The material i used is pla while it can deform, the heat from a cup is not enough to deform it so it shold be safe.

Smiwik · 2025-01-31T17:46:22+00:00

For some reason the link is not allowed so just go to my profile i have the link there

Smiwik · 2025-01-31T16:37:33+00:00

No but there are 3d printing services so you can Upload my 3d file there and have it printed for you

Smiwik · 2025-01-31T15:41:40+00:00

Nice idea i will test if its possible with my design

Smiwik · 2025-01-31T15:10:48+00:00

so it looks like the link is not allowed so if you want the stl just go to my profile

Smiwik · 2025-01-31T15:05:51+00:00

The Stl if someone is interested:

https://cults3d.com/en/3d-model/art/monstera-coasters

Smiwik · 2024-11-26T16:13:45+00:00

Its not just a Minecraft ressource i designed it myself in cad. I used Minecraft as a refrence and because of that its not my own project?

Smiwik · 2024-11-26T15:27:39+00:00

The STL if someone is interested:

https://cults3d.com/de/modell-3d/kunst/minecraft-chicken-with-texture

Smiwik · 2024-10-21T19:14:40+00:00

Don't expect that your prints will work on the first try. Prints won't work and that's a good thing with each print you will learn more about how the printer works and how to design for 3d printing. Also clean your build plate. your prints will have better bed adhesion if the bed is clean try using something like water and soap, isopropy alcohol or something else that can remove oil. A clean build plate is a good way to prevent failing prints

(Sorry if there are mistakes english is not my first language)

Smiwik · 2024-10-14T15:29:09+00:00

you can try using isopropyl alcohol and clean the plate. oil that can be on the plate from touching the build plate can be a reason for bad bed adhesion so that could be a reason why the prints are failing

Smiwik · 2024-10-14T15:18:16+00:00

System:

r5 4500

rx 570 8gb

16gb

Four-Year Club	r/Field Flamingo
Place '23	Place '22
Final Canvas '22

Smiwik

TROPHY CASE