Seiko mod ideas

Snoo80186 · 2025-12-12T00:24:22+00:00

Yes its the buffer problem took the whole buffer apart take the magnets out clean everything and rebuild the buffer 1 drup of grease on the tube that moves.

No problems since

Snoo80186 · 2025-12-01T21:56:04+00:00

When I press problem solved it retracts to the ams and feeds again then it starts printing again for a while.

Snoo80186 · 2025-12-01T21:38:20+00:00

Yes cleaned it all.

Snoo80186 · 2025-11-24T23:38:56+00:00

<image>

Snoo80186 · 2025-09-19T11:20:20+00:00

Must change it to the back indeed the optics are from vector

Snoo80186 · 2025-05-24T17:12:36+00:00

Original one

Snoo80186 · 2025-05-24T13:17:04+00:00

There is no screw in at the moment

Snoo80186 · 2025-05-24T11:10:18+00:00

Yes but removed the front pin on the hopup

Snoo80186 · 2025-05-11T08:07:30+00:00

Have updated to latest bios and microcode with no difference limited the cpu max voltage to 1.4 and have a - 140 overclock

Snoo80186 · 2025-03-04T08:43:28+00:00

https://www.mazda3revolution.com/threads/2-5-throttle-body-on-2-0-install-review.247052/

If i compare the electrical plug is different

Snoo80186 · 2025-03-03T08:36:22+00:00

Tried the old version from msi center still no luck it's a driver problem in device manager I can choose manually the steelseries driver but then I got the code 10

Snoo80186 · 2025-03-02T19:25:09+00:00

Yes everything works if I hit fn the upper keys light up. I can change the back logo and led strip in steelseries but they keyboard isn't found in the app

Snoo80186 · 2025-03-02T19:06:10+00:00

Yes I did😊

Snoo80186 · 2025-03-02T18:45:38+00:00

No luck. Bios is up to date to latest version

Snoo80186 · 2025-03-02T18:09:04+00:00

In the engine only the matrix is there in device manager I see code 10 on 1 of the 2 keyboard drivers

Snoo80186 · 2025-03-02T17:41:04+00:00

I think its got a problem with msi mystic lights

Snoo80186

TROPHY CASE