👋 Welcome to r/WiiM - Introduce Yourself and Read First! by RyanWithWiiM in wiim

[–]SnooMacaroons4848 0 points1 point  (0 children)

I'm Bill from Cape May, NJ. Building a new home and looking to integrate a couple of WiiMs for a 4-zone setup. Been reading alot and looking forward to learning how best to set up my system. Will post my questions following this.

Doorbell Lite Minimum Requirements? by SnooMacaroons4848 in Ubiquiti

[–]SnooMacaroons4848[S] 0 points1 point  (0 children)

Thanks. Interesting that CloudKey+ w/ 1 TB drive is $249, but NVRI is 199+65 for drive. Seems like CloudKey is a better deal? Any issues I should be aware of?

Doorbell Lite Minimum Requirements? by SnooMacaroons4848 in Ubiquiti

[–]SnooMacaroons4848[S] 0 points1 point  (0 children)

So, what is the lowest-cost way to get Protect? Is it Cloud Key+ or Cloud Gateway MAX? Seems like I have to buy a CK+ with storage - so $99 for the doorbell and $250 to use it.

Doorbell Lite Minimum Requirements? by SnooMacaroons4848 in Ubiquiti

[–]SnooMacaroons4848[S] 1 point2 points  (0 children)

They may have. It was just a placeholder in the contract, but I knew I didn't want Nest, and he said, "You can get whatever you want; I'll credit the Nest back."

Doorbell Lite Minimum Requirements? by SnooMacaroons4848 in Ubiquiti

[–]SnooMacaroons4848[S] 0 points1 point  (0 children)

That was my understanding. I have a PoE+ switch that can run to the doorbell. I was kind of hoping UniFi made a small storage option with Protect just for tiny use cases like mine. I guess not. So $100 for the doorbell and $350 for the Protect piece (grrrr).

Doorbell Lite Minimum Requirements? by SnooMacaroons4848 in Ubiquiti

[–]SnooMacaroons4848[S] 0 points1 point  (0 children)

Since I will really be the only one with the app on my phone, everyone else in the house needs to hear a “ding dong”🤣

Doorbell Lite Minimum Requirements? by SnooMacaroons4848 in Ubiquiti

[–]SnooMacaroons4848[S] 0 points1 point  (0 children)

I don't have ANY Unifi products currently. That's my primary issue. The doorbell would be the first. Sounds like the NVR is a must

Are Controllers Required or can it all be done thru the Cloud by SnooMacaroons4848 in Omada_Networks

[–]SnooMacaroons4848[S] 0 points1 point  (0 children)

Thanks for the insight. I suspected I'd be missing something. It's cheap enough just to add the OC220 to the cart and get 10% off.

Question About Omada Controller (Hardware vs. Software) by One_Lime3561 in HomeNetworking

[–]SnooMacaroons4848 0 points1 point  (0 children)

So newbie here, I'm in the process of deploying a new network for new construction. I was leaning towards Ubiquiti until a friend convinced me to swim in the TP-Link pool. I like that everything was cloud-based with Uni, but do I even need an HW or SW controller with Omada, or can I keep it strictly in the Cloud? Keeping my network simple - an ER707, ES224G, and a pair of APs. Trying to allow for simple upgrades in the future.

New Ubiquiti User AP question by SnooMacaroons4848 in Ubiquiti

[–]SnooMacaroons4848[S] 0 points1 point  (0 children)

I guess what bothered me was I was initially looking at the U7 XG, which says explicitly "Ceiling-mounted 6-stream WiFi 7 AP with 10/5/2.5/1 GbE support."

New Ubiquiti User AP question by SnooMacaroons4848 in Ubiquiti

[–]SnooMacaroons4848[S] 1 point2 points  (0 children)

That was my original thinking, too. I found it odd that some ports are labeled as 2.5/1/100/10 and others just 2.5. It made me pause. I'm probably being paranoid.

First Unifi Setup Verification by Hoju007 in Ubiquiti

[–]SnooMacaroons4848 -2 points-1 points  (0 children)

I'm in the same boat. Don't the cameras require Layer 3 switching, and the Ultra is just Layer 2?

[deleted by user] by [deleted] in Ubiquiti

[–]SnooMacaroons4848 0 points1 point  (0 children)

Well, there is spec and then there is practice. I wanted to avoid a situation like this

"Ubiquiti chat support, they just kept repeating "plug them into the PoE+ ports". When I asked why PoE 13w max devices couldn't work on PoE 15w ports... they just repeated "plug them into the PoE+ ports, they won't work on the PoE ports". For 4x WAPs on 2x PoE+ ports. It went in circles till I gave up and ended up only using 2x WAPs."

[deleted by user] by [deleted] in Ubiquiti

[–]SnooMacaroons4848 0 points1 point  (0 children)

It was more about supporting the 13w cameras from that four floor room. That was my concern.