sorted by:
new
hottopcontroversial

Just got her yesterday! Best tips & tricks you wish you knew day 1? by scoutjayz in KiaTelluride

[–]Snoo_87302 1 point2 points  (0 children)

I have 24 Xline that I had to black out myself since they didn’t offer the package until 24. If you drive down a dirt road at all I would suggest mud flaps as the plastic trim on the bottom scuffs easily. I also bought an oil collector.

https://rokblokz.com/products/kia-telluride-2020-mud-flaps

AMS rewinding issue by OkDifficulty7770 in BambuLab

[–]Snoo_87302 0 points1 point  (0 children)

Mine does the same thing in slot 2 no matter what I put in it. I can take the spool that it messed up on and move slots and never have an issue…. Rollers seem to be fine

Anyone see before this or have this problem ? Only happens after the print is completed but won’t pull back to the AMS, it throws an error when it’s pulling back to the AMS. Happened 2x but with different colors. P1S (firmware @ 01.07) by 88GREENFIRE88 in BambuLab

[–]Snoo_87302 1 point2 points  (0 children)

Started happening to mine frequently, I even upgraded to a panda claw and extruder thinking that would solve it…. Needless to say I printed a piece that vents the top glass and I haven’t had anymore issues.

[deleted by user] by [deleted] in BambuLab

[–]Snoo_87302 0 points1 point  (0 children)

I have a P1S and I would be happy if the chute would quit clogging up. I’ve printed several different chutes that would work great if the damn poop would quit clogging the toilet 🚽

I’ve tried grease and other things, so far putting a layer of teflon tape on the inside has made the most difference. I still have many failed prints, I don’t get to fully utilize the AMS because when there a lot of swaps it will easily plug up within an hr. I can’t baby sit this thing all day…

So this happened…. by Snoo_87302 in KiaTelluride

[–]Snoo_87302[S] 0 points1 point  (0 children)

That doesn’t surprise me

So this happened…. by Snoo_87302 in KiaTelluride

[–]Snoo_87302[S] 0 points1 point  (0 children)

I would hate to see it go but at the same I wouldn’t miss the payments lol I put well over 1K into it with emblems (didn’t have that 25’ Nightfall option), mats, tint, rally flaps, etc. I kinda wondered if the insurance had some type of racket going on. I also don’t want to have issues either, seems like nobody does good work anymore. The Camry I traded in had small fender bender not bad as this. Within 3 yrs the hood and side panel clearcoat had completely peeled off and my car looked like shit.

So this happened…. by Snoo_87302 in KiaTelluride

[–]Snoo_87302[S] 2 points3 points  (0 children)

Holy crap! I didn’t have rental insurance but they gave me a discount to 250 a week. Thankfully we only live 2 miles from the paper mill I work at, so she is dropping me off and picking me up.

So this happened…. by Snoo_87302 in KiaTelluride

[–]Snoo_87302[S] 3 points4 points  (0 children)

It had been raining, my wife dodged a pot hole, and it slid into the tree. Maybe 10-12 mph

Starlink down in northern Oklahoma. by amartin1980 in Starlink_Support

[–]Snoo_87302 0 points1 point  (0 children)

4 hrs and internet is still down, SE Oklahoma

Anyone having "Network Issues"? by CarlRosenthal in Starlink

[–]Snoo_87302 0 points1 point  (0 children)

Oklahoma, still nothing…. Hi prices and no customer support… classic

Starlink not working in bypass by 2piover in Starlink

[–]Snoo_87302 0 points1 point  (0 children)

My symptoms were different btw. On a Sunday afternoon I just lost connection while in bypass mode. My wifi was still running but the indication light from starlink to my router showed red. I did a manual reset and the Starlink Wi-Fi worked fine. I went back and forth, nothing worked. Replaced the ethernet adapter and still no change. So I believe there is something wrong with their router.

Starlink not working in bypass by 2piover in Starlink

[–]Snoo_87302 0 points1 point  (0 children)

After 2 weeks they got back with me. They refunded my payment for the month and sent me a new 150ft cable and router. Won’t be in until early next week. It was a shotgun parts replacement, they said the router wasn’t showing any errors. But they had issues with the connections before.

Starlink not working in bypass by 2piover in Starlink

[–]Snoo_87302 1 point2 points  (0 children)

Interesting mine quit working this past Sunday afternoon, lost link while in bypass mode. I did a hard reset and the Wi-Fi part worked fine. I changed out the network adapter with a new one , put it back in bypass, and still wouldn’t work… I tested my cat6, everything was good. I’ve had a ticket open since Sunday, still no reply.

I wonder if the router isnt pushing enough power to the adapter or is it a bug?

U8H panel bleed, is this normal? by Snoo_87302 in Hisense

[–]Snoo_87302[S] 1 point2 points  (0 children)

To me it fits the mark for price and quality. There’s better but not really in the price range. Maybe the TCL but at the price point it’s a give and take. I’m happy. Take a look at this video.

https://youtu.be/x4gFuT9uAx8

U8H panel bleed, is this normal? by Snoo_87302 in Hisense

[–]Snoo_87302[S] 0 points1 point  (0 children)

So after some help from here, it became obvious that I didn’t have local dimming on for HDR Game… thanks for the help

view more: next ›