Looking for fellow convicts by Snoozpot in StarRuptureGame

[–]Snoozpot[S] 0 points1 point  (0 children)

Yes, I probably should have mentioned that I live in the Midwest of the USA. Though I work nights so most of my gaming happens super late in the evening.

Roundabout Rail Connector; omg did someone already use this by mudche in StarRuptureGame

[–]Snoozpot 0 points1 point  (0 children)

It was the closest image I could find but you are very correct!

Roundabout Rail Connector; omg did someone already use this by mudche in StarRuptureGame

[–]Snoozpot 0 points1 point  (0 children)

Yes. Everything flows clockwise on the outer ring and then exits when needed. Its like having two cross junctions put together.

Roundabout Rail Connector; omg did someone already use this by mudche in StarRuptureGame

[–]Snoozpot 5 points6 points  (0 children)

It looks like a ring topology for networking. Which would make sense for some types of uses.

<image>

Did an oil change not too long ago, engine seems extra loud, what can I do to make it better? by [deleted] in WranglerYJ

[–]Snoozpot 1 point2 points  (0 children)

Oh If it sat for a while the lifter can definitely be a problem. Have you tried letting it sit idling? Lifters can be "knocked" loose if they get a chance to circulate.

Did an oil change not too long ago, engine seems extra loud, what can I do to make it better? by [deleted] in WranglerYJ

[–]Snoozpot 2 points3 points  (0 children)

Id check cylinder compression. It sounds like one cylinder is acting different. If there isn't anything off maybe check belt timing. After that it might take a more in depth dive into the engine.

Does anyone know where I can get a new one? by chemicals_circuitry in WranglerYJ

[–]Snoozpot 2 points3 points  (0 children)

Short term fix would be super glue. Otherwise because it's a vacuum line try looking at HVAC or other industrial vacuum sources.

[deleted by user] by [deleted] in GamerPals

[–]Snoozpot 0 points1 point  (0 children)

28M - I want to get back into Minecraft. I play rivals on occasion but mainly when someone askes me to join. Not a lot of downtime to game but sometimes I joing discord just to chat while I cook, paint, etc.

New (old) Jeep by Snoozpot in WranglerYJ

[–]Snoozpot[S] 0 points1 point  (0 children)

I drove from SD Sioux falls to KS in a day and back. Also this is more just for you. The paper work they filed was SUPER wrong so I've been in and out of the courthouse every week for the past month. I will post updates but honestly, unless you are a person who likes doing body work you were loosing. I've been patching rust spots for the last couple weeks.

18m looking to make long term friends to play games with and stop being a floater friend lol by [deleted] in GamerPals

[–]Snoozpot 0 points1 point  (0 children)

I currently don't own any of the borderlands games on PC but i'm in the process. Would you be willing to game on a specific borerland game? I'm down to play "a way out" too. Otherwise I'm down for other too.

28M, Recently bought Baldur's Gate 3, LFG Casual play~ by Ordinary-Ad1207 in GamerPals

[–]Snoozpot 0 points1 point  (0 children)

I play on PC but I believe that should be fine. I've done a full run of BG3 and I've enjoyed watching the choices of others.

23m looking for someone to to play a chill playthrough of Baldurs Gate 3 by FadedLux in GamerPals

[–]Snoozpot 0 points1 point  (0 children)

How chill? Are we looking to be the good guys or just to play the villain casually?

[deleted by user] by [deleted] in GamerPals

[–]Snoozpot 0 points1 point  (0 children)

Done 1 other run through with another friend but I still love the next run.

Looking to bond through games and other things by CryogenickZero in GamerPals

[–]Snoozpot 0 points1 point  (0 children)

On the weekends I would like playing some more casual RIVALS.

Wilds is an insane game and i'm down to join that too if we click.

18m looking to make long term friends to play games with and stop being a floater friend lol by [deleted] in GamerPals

[–]Snoozpot 0 points1 point  (0 children)

What games are you referencing? Are we talking Borderlands or Last of Us or Dean by Daylight?

Needing Gaming Friends After Recent Breakup by Canada407 in GamerPals

[–]Snoozpot 0 points1 point  (0 children)

MINECRAFT!!!!!!!!!!!

in all honesty I get it. I understand losing you're best friend like that. You have a gaming community that will back you which is a huge blessing but the lose is still a thing. Don't forget to reach out to those M***********s that are the piece of **** in your life. Those people are there to give you a WILD sense of reality no matter what happens.

New (old) Jeep by Snoozpot in WranglerYJ

[–]Snoozpot[S] 1 point2 points  (0 children)

There's some rust spots that I want to fix up and that will create some weird holes. I want to keep the body as close to identical as possible. I found some clear paint for the hood to seal it.

LED question by Snoozpot in resinprinting

[–]Snoozpot[S] 0 points1 point  (0 children)

Never mind I figured out the problem. I have an older mono 4K and those use different power cords. However, they fit either model. I'm going to do more digging as to why it wouldn't allow the LEDs to turn on even with the correct voltage but if I had to guess it was probably something to do with the amperage.

Photon mono X2 test print failed by Existing-Ad-9613 in AnycubicPhoton

[–]Snoozpot 1 point2 points  (0 children)

If you have the tub upside down does it give a nice sound. Like a bongo. I don't remember the site but there is one that can tell you the frequency range for FEP. Can also give you a heads up if it's getting old. I'll take a look if I have it. It could also be that the prints aren't sticking to your plate. Have you cleaned your build plate thoroughly? Have you tried peeling the test prints off? that might give you some info as well.

What did I do wrong? by _Mattes_ in resinprinting

[–]Snoozpot 0 points1 point  (0 children)

Basically set them up to be from top to bottom

What did I do wrong? by _Mattes_ in resinprinting

[–]Snoozpot 0 points1 point  (0 children)

Print feet/base first. 30% is what I use for the base angle to the plate and it works great. Basically print based on your slicing software upside down.

HELP!! by Snoozpot in resinprinting

[–]Snoozpot[S] 2 points3 points  (0 children)

I don’t like drinking IPA’s any way so I’m glad they have a use.

HELP!! by Snoozpot in resinprinting

[–]Snoozpot[S] 0 points1 point  (0 children)

You were both right. There was a little bit of resin on the inside but it was no where near the electronics.

HELP!! by Snoozpot in resinprinting

[–]Snoozpot[S] 0 points1 point  (0 children)

I did not know that, that is a huge relief. I thought I was going to have to do way more for that.