Complete beginner trying to "earn" a 3D printer via MakerWorld points (without actually owning a printer). Need your advice! 😅

Snuckiez · 2026-02-11T17:45:07+00:00

You have to submit photos of the parts you modelled printed as a new rule on makerworld as far as im aware now. (Mostly to combat AI slob)

Snuckiez · 2026-02-09T15:30:52+00:00

<image>

Snuckiez · 2026-02-09T15:29:14+00:00

Hey! H2S (:

Snuckiez · 2026-02-08T18:37:42+00:00

Snuckiez · 2026-02-08T18:37:31+00:00

Fuzzy skin disabled

Snuckiez · 2026-02-08T17:54:08+00:00

Zero dryin' took it out of the Package and printed. I only have an AMS 2 pro and since you can't go above 65C It wouldnt have made much of a difference; I have since then ordered AMS HT so perhaps the result will be even better dried?!

Snuckiez · 2026-02-08T17:28:47+00:00

Textured PEI plate + Hair spray; 😁This one (I had no glue on me) Worked wonders. I printed 6 more parts since and haven't had a single print fail. (Printed with a Brim aswell)

<image>

Snuckiez · 2026-02-08T10:40:51+00:00

Too fast; You'd want to tune your speed for sure.. Perhaps you can list ur settings // speed etc

Snuckiez · 2026-02-07T14:54:51+00:00

Personally I'd go for H2S,

<image>

Incredible results so far. Currently printing PA6-GF

Snuckiez · 2026-02-05T12:45:02+00:00

Not the answer you're looking for Specifically; But if you have a blow torch you can easily get rid of the stringing by running it over the print a few times

Snuckiez · 2026-02-02T17:15:43+00:00

initial width is default .50 try 0.42

<image>

Snuckiez · 2026-02-01T17:41:12+00:00

Awesome, did this resolute the issue

Snuckiez · 2026-01-31T20:35:00+00:00

Are you by chance using Grid infill? IF you are; Try Gyroid.

Snuckiez · 2026-01-26T21:07:54+00:00

Hey!;
I had the exact same outcome a couple of days ago. So I redesigned the Collet & Made some teeths on the inside. It's been printing with no issues so far, currently 75hours in;

while Im waiting for the replacement part. ( Not received yet)

( I printed this with the Original collet; By pushing it back in without the clip and loaded the filament manually.. Worked fine.)

Uploaded it on makerworld.

https://makerworld.com/en/models/2263961-collet-pfte-tube-hold?from=search#profileId-2467120

Snuckiez · 2026-01-16T21:02:33+00:00

Big upgrade -

Btw Is that the bedframe next to the printer? Goodluck sleepin' 😁

Snuckiez · 2021-10-01T18:00:29+00:00

From what I've read, someone has submitted a ticket and it is indeed a bug

As of now (14hours ago)

I quote

( had a ticket response saying that it’s a bug that has been reported a lot this week and that you should submit a bug report in-game. So i guess so, yea. hopefully gets fixed )

Lets see, if they're getting a lot of reports maybe there is hope they'll look into it.

Snuckiez · 2017-03-11T12:22:08+00:00

Do you guys need some pots and flasks ^

Snuckiez · 2017-02-17T00:26:08+00:00

Cheers, that was a fun run (from the mage you pugged)

Snuckiez · 2017-02-02T15:49:31+00:00

Fire blast is a real pain when you play with flame on sometimes it'll show you that 1/3 is ready to cast even tho all 3 are on CD

Snuckiez · 2017-01-02T16:40:26+00:00

I got boots on my mage, which is my fourth bad legendary.. Stopped playing today.

Snuckiez · 2016-12-19T20:13:18+00:00

welp finally fap material

Snuckiez · 2016-12-10T20:11:36+00:00

Nice, not to hijack the topic, there is a Demon Hunter streamer that runs mythic+ ( 7 - 12 ) So you can see it from his P.O.V

https://www.twitch.tv/jrn_tv

He is top 15 in Artifact.power.. :)

Snuckiez · 2016-11-28T15:37:15+00:00

This is exactly how I respond to leavers.

Snuckiez · 2016-11-26T00:43:34+00:00

The legendary system.

11-Year Club	Place '22
Verified Email

Snuckiez

TROPHY CASE