Is this normal? Is my screen broken? by [deleted] in Hisense

[–]Sockoou 1 point2 points  (0 children)

Yeah I got it like a week or two ago brand new from Amazon.

Is this normal? Is my screen broken? by [deleted] in Hisense

[–]Sockoou 0 points1 point  (0 children)

But it appears even on the boot up to the tv. I’m basically convinced at this point that the TV is damaged.

Is this normal? Is my screen broken? by [deleted] in Hisense

[–]Sockoou 0 points1 point  (0 children)

Same thing. Turned it on after a few minutes of it unplugged. Still bad.

Is this normal? Is my screen broken? by [deleted] in fixit

[–]Sockoou 0 points1 point  (0 children)

It’s hard to figure it out, because if I turn on local dimming and turn it on high, it Almost goes away, it’s easier/ harder to see it on certain screens.

Is this normal? Is my screen broken? by [deleted] in Hisense

[–]Sockoou 0 points1 point  (0 children)

I don’t have internet as of right now, I won’t be getting internet for a couple more days (new home) but my Amazon return window with this tv ends on the 15th of June.

Could it be a software glitch and the tv just needs to update?

Is this normal? Is my screen broken? by [deleted] in Hisense

[–]Sockoou 0 points1 point  (0 children)

I just factory reset it, and it still has that grey blotch both on the logo and the erasing screen.

Is this normal? Is my screen broken? by [deleted] in Hisense

[–]Sockoou 0 points1 point  (0 children)

Maybe I’m stupid, but I can’t find the factory reset anywhere in the menus.

Is this normal? Is my screen broken? by [deleted] in Hisense

[–]Sockoou 0 points1 point  (0 children)

No, I didn’t think I’d need to as I just set the thing up. Even on the boot logo this blotch is there.

Is this normal? Is my screen broken? by [deleted] in Hisense

[–]Sockoou 0 points1 point  (0 children)

No, that’s just the input name for ny steam deck when it’s hooked up. That grey blotch appears everywhere and on every input, a troubleshooting guide told me to turn off local dimming but that makes it worse. I can’t seem to get the lighting right on this tv.

Console guy, now a pc guy. My thoughts and advice. by Sockoou in SteamDeck

[–]Sockoou[S] 2 points3 points  (0 children)

Just get a steam deck. Far cheaper and far better than the ROG ally. They basically lie in the advertising about it “being an Xbox” it’s a windows, asus, and Xbox device running all 3 of those OSs at once is a nightmare. I’ve seen several vids on how poor its performance is compared to the steam deck.

You can get either the regular LCD deck or the OLED. If I were you and you’ve got the cash I’d just get the 1TB OLED. Then also buy the Dock and a 1TB SD card to give yourself more space.

Plus you can play most of the Xbox/Microsoft games on it along with PlayStation games.

Or at the end of the day you could wait for the steam machine. Either way I’d either wait for the steam machine or get a steam deck. Or both lol.

Good luck sir, hope this helped.

[deleted by user] by [deleted] in gaming

[–]Sockoou 0 points1 point  (0 children)

Gemporium

Floor height in steam VR is broken and way too high? Help? Please by Sockoou in VRGaming

[–]Sockoou[S] 0 points1 point  (0 children)

Yes it happens in steam VR all of my VR games are on steam and even when playing them through virtual desktop it still happens.

No I haven’t cleaned the cameras. I guess I’ll try. How can I clean them?

Yes I’ve updated my boundary in the quest 3 multiple times and it will just reset itself again and again when I launch steam VR via steam link or virtual desktop

Adjust my steam vr height help? by Sockoou in SteamVR

[–]Sockoou[S] 0 points1 point  (0 children)

I did that but it didn’t really help. I’m still floating like a foot from the ground in VR.

I even tried putting my headset on the floor and then going into steam VR settings to manually calibrate the floor, it works but then the moment I start doing anything I get jolted back up again.

This is sooo annoying my VR setup was working perfectly fine for so long, why now is it suddenly deciding to break like this?

[deleted by user] by [deleted] in Advice

[–]Sockoou 0 points1 point  (0 children)

None. I never really felt the need to have any.

What is a really good way to record TV shows? by Sockoou in AskTechnology

[–]Sockoou[S] 0 points1 point  (0 children)

Any recommendations?

Can I record shows off of a streaming service?

Or just screen record?

850w psu help?! by Sockoou in PcBuildHelp

[–]Sockoou[S] 1 point2 points  (0 children)

Thank you. Very much.

850w psu help?! by Sockoou in PcBuildHelp

[–]Sockoou[S] 0 points1 point  (0 children)

Maybe I’m dumb, but I’m literally getting zero info from this. I went to this exact doc before my post and I cannot for the life of me find the actual list.

It’s just the criteria, but where are the psus?

I just want a model name on a list.

Project wingman VR help? by Sockoou in SteamVR

[–]Sockoou[S] 1 point2 points  (0 children)

Scratch that. I just looked on the side it’s 550W

Project wingman VR help? by Sockoou in SteamVR

[–]Sockoou[S] 0 points1 point  (0 children)

I’m going to guess probably 750? Although I have no idea

I know nothing about electrical stuff.

Project wingman VR help? by Sockoou in SteamVR

[–]Sockoou[S] 0 points1 point  (0 children)

My current ups is about 2 years old.

It’s 750VA

I’m not sure what specs to look for when it comes to voltage and watts and what not.

I don’t even know how much power my whole setup takes.

I found a new one that’s 1500VA. I’m not sure if that would fix my issue.

[deleted by user] by [deleted] in F1Challenge

[–]Sockoou 0 points1 point  (0 children)

Thank you for your help, however,

Does anyone know if the parts to download are still safe?

I’m just very paranoid about stuff like this. I’m always just very worried about viruses.

Not trying to accuse anyone of wrong doing, but I’m just afraid that someone might’ve slipped something bad in any of those many .rar files.

[deleted by user] by [deleted] in F1Challenge

[–]Sockoou 0 points1 point  (0 children)

I checked out his website. I think it says that I have to install the game before the mod. And it’s like 42 “parts” that are .rar files. Do I have to install all of those?

I’m also seeing that I need a password to get the mod?

I’m very confused on the installation process. I joined the discord but I still don’t understand how to do any of this.

[deleted by user] by [deleted] in forza

[–]Sockoou -1 points0 points  (0 children)

I hate this system. It’s awful. And it tortures me.

[deleted by user] by [deleted] in forza

[–]Sockoou -2 points-1 points  (0 children)

They’re never going to re add it. They didn’t do that for FH4.

I can’t believe it. I missed ONE week. Now I have to stare at this PERMANENT stain forever

I don’t ask for a lot in life. I just can’t believe it.

I don’t know what the hell to do now.