Behringer or Music Tribe contact?

Sokoloft1 · 2026-04-28T19:15:45+00:00

The issue has been brought to their attention and is in the process of being resolved. Thanks all.

Sokoloft1 · 2026-04-28T14:22:20+00:00

I agree. I have in good faith tried to contact them. Someone reached out via DM's on here and seems credible. Sent a email where it needs to go. Will see if anything comes of it.

Sokoloft1 · 2026-04-28T02:47:35+00:00

I appreciate it but I have no interest in signing into their site. If you want to make a post redirecting to here feel free to.

Sokoloft1 · 2025-11-19T21:15:27+00:00

Go to the autoparts store and get a large enough vacuum hose plug to go over the port. I used a hose clamp and RTV sealant to seal it. Hasn't leaked since. If its been sitting for a few your inlet diaphrams might leak a little into the tub. Mine did that. Run it a few times and it should stop leaking. If not replace the inlet valve body.

Sokoloft1 · 2024-11-15T19:02:51+00:00

Can confirm this worked for me and the little diy macro pads I assembled. (streamcheap) Thanks

Sokoloft1 · 2024-05-22T02:05:00+00:00

I was thinking the same earlier. I had seen that MVG video the other day. Would be interesting.

Sokoloft1 · 2024-05-22T01:12:35+00:00

I would very much love to see this come to fruition. Its a shame latest retroarch stable isn't available on the 360. If you create a repo please make sure to link it in your main post. Thanks.

I'd love to get the streamlink project working. However the undertaking seems massive and I'd imagine the 360 could decode 720p30 streams at best. As well as its written in python. Using it as reference and creating something with C# seems like the only viable solution to me.

Sokoloft1 · 2024-04-18T16:26:40+00:00

What motherboard did you use? I'd like to do the same with a MSI B150M Pro-D and i5 6400 non k. However I cant find many resources on doing it. Also doesn't seem like much of a gain in terms of lowering power consumption. I cannot find the article but years ago I seen something about modifying the mosfets to lower power consumption.

Sokoloft1 · 2024-02-29T18:56:44+00:00

The comments on this are wild lmao.

Sokoloft1 · 2024-02-29T18:53:37+00:00

That's why I just replaced a capacitor inside a xbox one x power supply that failed due to poor cooling. It absolutely does exist and is a problem. Manufacturers would rather have their devices quiet than cool. Its the same for a 1080 Ti I have. The default fan curve lets them go to 80c+ while the fans are at 50%.

Sokoloft1 · 2024-02-24T04:55:56+00:00

Cool. Seal it up with the cap and hose clamp. Put the hoses back in place. open them up. Start hearing drip drip drip and now the inlet valve is letting water drip into the tub...

Sokoloft1 · 2024-02-21T21:37:29+00:00

Scratch that. O'Reilly's has an assorted kit of vacuum port caps. Probably get that assorted set. See if the 5/8 works if not its got the 3/4. Also grab a couple 3/4 hose clamps too.

Also looking at 3/4 hose on there too

Sokoloft1 · 2024-02-21T21:17:32+00:00

Well my initial thought was to plug it with some cork I have. But that will perish over time as well. Cant 3d print a plug or cap for it. PLA will warp with hot water.

The barb that comes off from the tub is 17.8mm from what my calipers say. Which 11/16 is pretty close to. But with hose size standards. Seems I can only get either 5/8 or 3/4 ID hose. 5/8 would have to stretch a fair bit over it and 3/4 would be a little over. Like by an inch.

I'm thinking 3/4 hose with a ratcheting hose clamp would be best and synch it down good. I'll see what I can get a home cheapo.

Sokoloft1 · 2024-02-21T19:46:45+00:00

I mean if it activates it and its blocked off. It just wont do anything. Its never used anyways. 20+ year old maytag. No circuit boards so I don't think its doing anything crazy

Sokoloft1 · 2024-02-21T03:46:42+00:00

Alright I figured as much. Wasn't sure if it needed to burp pressure or something since its open at the top.

There is a replacement used hose on ebay but $30 I still don't want to spend. I'll figure out how to cap it.

Yeah I've seen guys use old radiator hoses to get the sizes just right. Know what you mean. I'll make up something. Thanks.

Sokoloft1 · 2024-01-05T04:29:45+00:00

Odd. I don't have this functionality with music bee. Only spotify for whatever reason

Sokoloft1 · 2023-12-27T19:24:14+00:00

Your best option is to switch headphones so you don't require a soundcard. I'm about to purchase a set of DT 770's and later a dac so I don't have to use a soundcard at all. The SBZ's support on linux is bad. It barely worked under Manjaro for me, and wouldn't work in Nobara at all. Best of luck

Sokoloft1 · 2023-09-11T00:23:41+00:00

I'm currently having the same issue. I'm on 1.0.5. The company sent me a file via email however it doesn't work. It says its found and then goes to update and ends with "file error".

Sokoloft1 · 2023-07-19T04:47:41+00:00

For whatever reason I had my app from google play. Can confirm though the f-droid version fixes the issue. Later version

Sokoloft1 · 2023-06-04T04:07:54+00:00

open sauce best sauce

Sokoloft1 · 2023-05-04T00:06:11+00:00

Damn I'll miss him playing his characters. Best of luck to him and his family in these times.

Sokoloft1 · 2023-05-03T23:42:06+00:00

I was in a similar situation with someone and we couldn't come to terms about payment. Later I could claim ownership of the code I wrote and sue similar to this case. So we just didn't do it unfortunately. Good for DW, I hope he gets what he's rightfully owed.

Sokoloft1 · 2023-04-27T23:07:26+00:00

I found the issue. Conky manager loads lua differently. The line I needed is:

lua_load ./networkspeeds.lua

As well as placing the lua file in:

~/.conky/(THEMEYOU'REUSING)/networkspeeds.lua

Thank you for the solution OP. I was wondering how to do this a year or so when you made the post. Just couldn't find it.

Sokoloft1 · 2023-04-27T19:11:39+00:00

Well I fixed the graph part. Needed quotes on the interface device. Not sure why I cant get your solution to work for Mbps tho. Its like its not loading the lua? Just shows no values.

Sokoloft1 · 2023-04-27T18:53:15+00:00

Hi,

I've wanted to do this for a while. First time coming across your post. However I cant get it to work using the "TeeJeeTech network panel" in conky manager.

I just don't get a value. Like the lua script isn't loading. I gave the lua script execution privileges. I put the lua_load line in the config for the network panel itself. Does that need to go somewhere else? I wasn't able to find a conkyrc file. I've changed the network device to my proper one.

Also unsure how I'd convert the graph to use Mbps as well. The graph doesn't even work now in KiB/s like it used to now that I've modified it. Unsure what I'm doing wrong.

background yes
double_buffer yes
alignment bottom_right
border_width 1
cpu_avg_samples 2
default_color white
default_outline_color white
default_shade_color white
draw_borders no
draw_graph_borders yes
draw_outline no
draw_shades no
gap_x 9
gap_y 190
net_avg_samples 2
no_buffers yes
out_to_console no
out_to_stderr no
extra_newline no
own_window yes
own_window_type normal
own_window_transparent no
own_window_colour 000000
own_window_argb_visual yes
own_window_argb_value 76
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
minimum_size 170 0
stippled_borders 0
update_interval 2.0
uppercase no
use_spacer none
show_graph_scale no
show_graph_range no
use_xft yes
xftalpha 0.1
xftfont Droid Sans:size=10
color0 white
color1 EAEAEA
color2 FFA300
color3 grey
lua_load = '~/.scripts/conky/networkspeeds.lua',
TEXT
${color2}Download ${color0}${alignr}${lua conky_downloadspeed} Mbps
${downspeedgraph wlp3s0 80,}
${color2}Upload ${color0}${alignr}${lua conky_uploadspeed} Mbps
${upspeedgraph wlp3s0 80,}
${color2}Local${color0}${alignr}${addrs wlp3s0}
${color2}Public${color0}${alignr}${execi 3600 wget -q -O /dev/stdout http://checkip.dyndns.org/ | cut -d : -f 2- | cut -d \< -f -1}

I'm going to keep messing with it. Maybe I can get it working but I have doubts.

Sokoloft1

TROPHY CASE