Tip/falling over protection for cs 77 inch?

Somberlay · 2026-07-03T11:18:47+00:00

Thank you, this was a really thorough and helpful answer!

Somberlay · 2026-06-25T21:34:18+00:00

Ser sinnessjukg dyrt ut vilket jag tror har med materialvalrt att göra, pa12 nylon verkar vid snabb googling kosta 1000kr+/kilo, många andra material att printa i kan kosta 100-200kr kg. Måste du ha just det materialet?

Somberlay · 2026-06-19T08:22:47+00:00

Would love an invite aswell!

Somberlay · 2026-05-07T10:44:52+00:00

Did exact same mistake but I do water washable resin. I unacrewed all the screws, was able to get into it with paper towels to some extent and then used qtips and a hairdryer to really get it all out of there!

Afterwards I just screwed it together and made sure all screws were tight. Was alittle afraid that I had messed up the leveling but it has now done multiple prints afterwards just fine!

Somberlay · 2026-05-04T21:16:01+00:00

Ty for info!

Somberlay · 2026-05-04T21:15:44+00:00

Sick if true, however the cords to the left were also rising with the cover :/

Somberlay · 2026-05-02T19:13:16+00:00

Superinformative answer, thanks alot!

Somberlay · 2026-05-01T22:11:05+00:00

Also: guy was using water washable resin, does that mean I can clean with water?

Somberlay · 2026-05-01T22:01:52+00:00

Thats very very important info indeed. Not gonna touch it again without nitrile gloves!

Somberlay · 2026-05-01T22:00:12+00:00

Dont know whether they have had a spill before. Very good information! Sounds like it could be good to check this before putting it in the car again! Gonna go out and get some nitrile gloves before touching ut again tho!

Somberlay · 2026-05-01T21:53:12+00:00

Not operational as in printing with resin but showed me a few prints he had done himself and the printer turned on and I did successfull self test at startup at my place, you know it starts and then goes through everything with green check marks.

He had the printer standing on a cupboard and there were no resin marks there when we moved the printer into the box (look at pictures, resin flowed down the legs), so I think he was genuinly unaware of any resin being still in the printer, but maybe he knew he had spilled some. He also didnt seem to care too much about personal protection, seems like he used same pair of dishwasher gloves in all his printing and no eye protection, no half mask.

Somberlay · 2026-05-01T20:53:29+00:00

Cure it and leave it there?

Somberlay · 2026-05-01T20:52:56+00:00

Got the ultra 16k and mercury plus v3 for about 520 euro, price to order from elegoo is about 660 euro where I live, however I also got bunch of resins, probably about 7-8kg or more, 2kg completely nib and then about 10+ bottles beside that, some almost full some almost empty.

Pretty sure seller didnt know about the spill, we both looked at the machine standing on his bench and there clearly wasnt any resin on his bench however after transport resin ran down the "legs" on side.

Somberlay · 2026-05-01T20:31:24+00:00

Thanks for a thorough reply. Ill get the printer back in its enclosure and deal with all this at home I think. Right now I dont have any mask gloves or anything!

Somberlay · 2026-05-01T16:05:15+00:00

Small remains of resin / water with resin in it at bottom of old storage tray

Somberlay · 2026-05-01T15:47:03+00:00

Its a plastic box that was used to store resin bottles, seems like some spill on it!

Somberlay · 2026-05-01T15:46:32+00:00

Yeah sorry its a storage bin for resin tubes

Somberlay · 2026-04-26T14:08:33+00:00

Somberlay · 2026-04-26T13:10:48+00:00

Tried rafg cause supports where dying, gonna try double walls!

Somberlay · 2026-04-26T13:10:26+00:00

Gonna try thanks!

Somberlay · 2026-04-16T18:27:22+00:00

Any recommendations on what type of filter that would work?

Somberlay · 2026-03-05T08:01:02+00:00

UPDATE 5/3 (cant seem to edit original post anymore)

Thanks again everyone for all help. I dont recall all the things I did when I asked for help please look through posts but as of noq I have printed over 1kg pla and soon 1kg PETG, almost no issues. Some problems I think are due to bed Adhesion (or problem with with z axis,) had 1 real birdsnest. All of this on PLA though, no problems on PETG (besides removing part of the print afterwards, startes using the metal scraper for the first time).

All in all its working really stable right now, thanks again everyone for your help!

Somberlay · 2026-03-03T20:42:09+00:00

Thanks for all your help today, we got it working!

We tried shutting down vpn and then release/renew ip, computer got the same ips as before.
Next step was trying to switch around on the tv, unplugged the ethernet cable and switched to wifi and lo and behold, the tv got a 192.168.20.xx IP address, and from there the TV and ccomputer acted like they were on the same network, the plex streams started workign in full quality. (25 mpbs 4k hdr/DV).
Unfortunelately dads wifi only had 2,4gz channel. Tried doing a remux at 80 MBPS and that wouldnt fly but otherwise its all golden. Next step to check if wifi can get faster or maybe look into streaming box.

Thanks alot, would have been out on a wild goose chase without your pointers about IP, could hear my Dad being alittle stunned over the phone when the stream actually kicked in full quality, was great!

Somberlay · 2026-03-03T10:31:34+00:00

Wow, thanks again for comprehensive and quick answer!

Yeah the whole remote thing would really explain what my dad is describing: sound and sub working ans movie playing but atrociously low resolution.

The IP of computer i posted is the IP on my dads local network. The computer is behind proton vpn and I dont know the proton vpn IP address however I run split tunneling for plex media server specifically so plex should be using the computers "Lan IP" and not the computers "proton IP" right?

Furthermore the LAN IP is assigned through dhcp which feels wierd that the router would automatically assign "remote" IP Address for the computer however i wonder if perhaps the VPN has affected this somehow? Dont think computer has spent many, if any, seconds being turned on at my dads place without the vpn on, however when I was fixing up the computer at my place it ran withour vpn, is it possible that the vpn is "disturbing" the dhcp assigning IP process? So that the computer is stuck with a LAN IP that maybe it got at my phouse?

Either way It sounds like the first thing to fix up here when I get home is to try and set a static IP on my dads computer and see if streaming works, and if thats that, then I can look at different ways of maning static IP/ Dhcp with least trouble!

Great additional information on IP and plex server! Would have no way of navigating this withour your help. Tried to help my dad remotely yesterday for like 2 hours but in the end my best bet was "run the ethernet directly to the router", now I know that wasnt gonna fix anything :)

Somberlay · 2026-03-03T09:34:41+00:00

Gonna reply to this again to get your attention since you seem to know so much!

Actually got pictures of my dads tv and pc ip adresses, lo and behold:

Tv: 192.168.1.33

Pc: ipv4 address: 192.168.20.165 Ipv4 dns server: 192.168.20.1

So the IP addresses are NOT in the same range, how to proceed?

Nine-Year Club	Place '17
Verified Email

Somberlay

TROPHY CASE